Geometric variability and surface finish of weld zones in Yb:YAG laser welded advanced high strength steels

Laser welding is used for joining advanced high strength steels (AHSS) to improve formability and performance. In this paper, the geometric variability observed in the fusion zones and heat affected zones of several combinations of AHSS (different types, coatings and thicknesses), which were butt welded using a Trumpf TRUDISK 6000^® Yb:YAG laser beam, is presented. The surface texture parameters such as roughness and waviness of laser welds were also measured and correlated with geometric variability. Results indicate that although high quality welds with minimal defects can be obtained using the Yb:YAG laser welding process, there is considerable variation in both the shape and the dimensions of weld zones. The variability increased with an increase in thickness differentials between the sheets being welded. Analysis of the top of the weld surfaces also suggested that aluminum coating on USIBOR samples contributes significantly to increased roughness. An increase in laser power coupled with corresponding increase in welding speed did not impact variability. A fair correlation between the surface roughness and weld region variability exists, although this needs further study.     

Sperm storage reflects within- and extra-pair mating opportunities in a cooperatively breeding bird

In passerine birds, storage and maturation of sperm takes place in the cloacal protuberance (CP), an external swelling of the reproductive organ. The considerable variation in CP size among species is presumed to be a consequence of varying levels of sperm-competition, but whether individual variation in CP size within a species also reflects sperm competition is not well established. Here, we study temporal variation in male CP size in relation to within-pair and extra-pair mating opportunities and cuckoldry risk in purple-crowned fairy-wrens Malurus coronatus. This is a socially monogamous cooperatively breeding passerine that can breed year-round and has low levels of extra-pair paternity (in 6?% of broods). We show that male CP size sharply increased a few weeks before, and rapidly regressed after his partner laid eggs, consistent with a cost of its maintenance and/or sperm production. Surprisingly, despite low levels of extra-pair paternity, CP size of non-breeding and pre-breeding males was positively correlated with the number of breeding females in the population, suggesting that CP size is sensitive to extra-pair mating opportunities. However, CP sizes do not seem to reflect cuckoldry risk: CP size of dominant males was unaffected by the presence of a subordinate that was unrelated to the dominant female, although those subordinates occasionally sire offspring, and had a larger CP than subordinates living with their mother. Our results suggest that, even in a species with low levels of extra-pair paternity, individual investment in sperm storage reflects both within-pair and, albeit to lesser extent, extra-pair mating opportunities.     

Enhancing generic ecological model for short-term prediction of Southern North Sea algal dynamics with remote sensing images

Physically based numerical modelling follows from the basic understanding of the underlying mechanisms and is often represented by a set of (partial differential) equations. It is one of the main approaches in population dynamics modelling. The emphasis of the model introduced in this paper is on the simulation of short-term spatial and temporal dynamics of harmful algal bloom (HAB) events. Total suspended matter (TSM) concentration is one of the dominant factors for harmful algal bloom (HAB) prediction in North Sea. However, the modelling of suspended matter contains a high degree of uncertainty in this area. Therefore, this research aims to achieve a better estimation for the short-term prediction of harmful algal bloom development in both space and time by using spatially distributed TSM retrieved from remotely sensed images as physically based model inputs. In order to supply complete spatially covered datasets for the physically based model instrument: generic ecological model (GEM), this research retrieves TSM information from MERIS images by means of proper estimation techniques including biharmonic splines and self-learning cellular automata. A better estimation of HAB spatial pattern development is achieved by adding spatially distributed TSM data as inputs to original GEM model, and it proved that chlorophyll-a concentration in this area is very sensitive to TSM concentration.     

Characterization of municipal solid waste combustion in a grate furnace

The objective of this paper is to evaluate the combustion process of municipal solid waste combustion in a grate furnace both experimentally and numerically by using data of a reference experiment with over-stoichiometric primary air supply. Measurements were carried out inside the combustion chamber of a pilot plant by monitoring temperatures and sampling gaseous combustion products along the bed surface. The data were assessed using elemental and energy balances. Experimental data of the axial temperature profiles of the flue gas, the fuel bed and the grate bars, as well as local gas flows and the flue gas composition measured above the fuel bed along the grate were used to describe the conversion process, including drying and carbon burnout. These data served as input to model the thermo- and fluid dynamic processes of the gas phase above the bed inside the combustion chamber. For this purpose the commercial code FLUENT was employed to carry out the simulations. Thus, the turbulent temperature, flow and species distributions in the combustion chamber of the pilot waste incinerator TAMARA were predicted. The results of the FLUENT modeling showed that under the prevailing conditions the flue gas burnout is almost completed before entering the first flue due to high temperatures, effective mixing and sufficient residence times of the flue gas inside the combustion chamber. This agrees well with the experimental results inside the first flue. On the basis of the above mentioned results, design and parametric studies can be carried out in a more efficient way by saving cost and time.     

Uncertainty propagation in vegetation distribution models based on ensemble classifiers

Ensemble learning techniques are increasingly applied for species and vegetation distribution modelling, often resulting in more accurate predictions. At the same time, uncertainty assessment of distribution models is gaining attention. In this study, Random Forests, an ensemble learning technique, is selected for vegetation distribution modelling based on environmental variables. The impact of two important sources of uncertainty, that is the uncertainty on spatial interpolation of environmental variables and the uncertainty on species clustering into vegetation types, is quantified based on sequential Gaussian simulation and pseudo-randomization tests, respectively. An empirical assessment of the uncertainty propagation to the distribution modelling results indicated a gradual decrease in performance with increasing input uncertainty. The test set error ranged from 30.83% to 52.63% and from 30.83% to 83.62%, when the uncertainty ranges on spatial interpolation and on vegetation clustering, respectively, were fully covered. Shannon’s entropy, which is proposed as a measure for uncertainty of ensemble predictions, revealed a similar increasing trend in prediction uncertainty. The implications of these results in an empirical distribution modelling framework are further discussed with respect to monitoring setup, spatial interpolation and species clustering.     

Genetic Engineering in Agriculture: Who Stands to Benefit?

The use of genetic engineering inagriculture has been the source of much debate. Todate, arguments have focused most strongly on thepotential human health risks, the flow of geneticmaterial to related species, and ecologicalconsequences. Little attention appears to have beengiven to a more fundamental concern, namely, who willbe the beneficiaries of this technology? Given the prevalence of chronic hunger and thestark economics of farming, it is arguable thatfarmers and the hungry should be the mainbeneficiaries of agricultural research. However, theapplication of genetic engineering appears unlikely tobenefit either of these two groups. This technology islargely controlled by the private sector, and itscontinued development hinges on its profitability.Thus, the only likely beneficiaries of the applicationof genetic engineering in agriculture are companieswith the capacity to use it.     

Handedness, Hand Roles, and Hand Injuries at Work

Hand injuries form a significant proportion of all workplace injuries. They are costly to treat, and lead to significant loss of time at work. This paper has two parts. First, there is a review of the literature that discusses prevalence of hand injury, and the significance of hand roles and handedness in industrial injuries. The second part represents an initial attempt to document the roles of the two hands in a particular industry, the metal manufacturing industry. The purpose of this survey of 30 different work stations in seven different industrial plants was to see whether there is a significant bias in terms of movement requirements for one or the other hand, leading to a possible differential risk of injury for the left and right hands. Overall, there was no clear bias favoring the right hand in activities assigned to the hands in seven different movement categories (MTM). However, the location of emergency controls favored the right hand unequivocally. The implications of biases favoring the left/right hand for safety of machine operation are discussed in the light of current findings on left/right hand performance in right- and lefthanders.     

Short retention times of stomach temperature loggers in free-living seabirds: is there hope in the spring?

Stomach temperature loggers have proved useful for the study of feeding activity in free-living seabirds, but their usage has been restricted because they are frequently dislodged and lost during the seabirds' regular regurgitation of indigestible prey remains. In the present study we examine the incidence of spontaneous regurgitation (pellet production) in free-living seabirds, consider the effect this has on the likely retrieval of stomach temperature loggers and present a structural modification of the logger housings which leads to a much lower incidence of regurgitation. Systems were tested on albatrosses, cormorants, gannets and penguins. Received: 15 July 1997 / Accepted: 31 October 1997