喷射成形制造工艺

喷射成形是一种先进的材料制备技术,该技术具有近终形制造的特点,近年来已广泛应用于研究和开发多种高性能快速凝固材料.文中介绍了喷射成形工艺过程、特点,并回顾了喷射成形工艺的发展历程及现在所达到的技术水平.     

一株硝基苯高效降解菌的筛选及其降解特性

自南京化工厂下水道底泥和废水处理系统曝气池活性污泥中驯化分离得到一株能快速降解硝基苯的菌株,初步鉴定其为不动杆菌属菌株。该菌株降解硝基苯的最适宜环境条件为温度25℃～35℃,pH7～8,振荡速率大于120r/m。在适宜环境条件下,该菌株能够在24h内全部降解初始浓度不超过400mg/L的硝基苯,该浓度范围内硝基苯的降解过程符合零级动力学特征;当硝基苯的初始浓度超过400mg/L时,降解菌的生长受到毒害作用,该浓度范围内硝基苯的降解在开始有一个明显的停滞期,降解过程不再符合零级或一级动力学特征。     

A note on optimal taxation of environmental spillovers

This note addresses the question of what policy the government should adopt when industrial pollution can be reduced partially by the imposition of effluent taxes and partially by a publicly operated waste treatment plant.In the case of increasing returns to public abatement, an effluent tax set at marginal user cost will not generate enough revenue to finance the facility. The key issue is that of finding additional revenue the most efficiently. Here, this question is dealt with in the framework of commodity taxation, with consideration given to the possibility that both effluent and commodity taxes derived on efficiency grounds might be quite regressive.     

Societal Concerns about Pork and Pork Production and Their Relationships to the Production System

Pork producers in Western Europe moreand more encounter a variety of societalconcerns about pork and pork production. Sofar, however, producers predominantly focusedon low consumer prices, therewith addressingjust one concern. This resulted in an intensiveand large-scale production system, decreasinglyrelated to the area of farm land, andaccompanied with increasing concerns aboutsafety and healthiness of pork, animal welfare,environmental pollution, and others.An overview was given of possible concernsabout West-European pork production with theconsumers, citizens, and producers, and thoseconcerns are traced back to the pork productionsystem. The various kinds and qualities ofinformation about the pork production system onwhich possible concerns are based have beenworked out extensively in this paper. Knowledgeabout the aspects of pork production that cangive rise to concerns can be used in two ways.First, the communication about those aspectstowards consumers and citizens can be adjustedor extended to give them better possibilitiesto make food choices or to develop their ownopinions about pork production. Second,producers could change the pork productionsystem such that it better satisfies consumersand citizens. Such adaptations are wellpossible, as three pork quality schemes, whichhave been evaluated, illustrate. However, mostof these adaptations can only be carried out atthe cost of the present low consumer prices andwill not occur spontaneously on a large scale.Therefore, accounting for the type andrelevance of the concerns, legislation isnecessary to address societal concerns in abalanced way such that pork production systemsbecome acceptable for the majority of oursociety.     

工业生态系统及其建设

本文分析了工业生态系统的基本特征及核心内容、阐述了工业生态系统建设的基础，原则及其对策。     

塔克拉玛干沙漠腹地沙尘暴特征--以塔中地区为例

塔克拉玛干沙漠是中国油气开发的重要区域，沙尘暴是该区域重要的灾害性天气，但以往相关的研究很少。为了了解塔克拉玛干沙漠腹地沙尘暴的发生规律，利用塔中气象站1997-2002年的气象资料，对塔中地区沙尘暴的强度、过程、类型和时间变化等特征进行了分析。研究结果表明：（1）塔中年平均沙尘暴日数为16．83d，较沙漠北缘的轮台和沙漠南缘的民丰、和田为多，体现出沙尘源对沙尘暴发生的影响；（2）沙尘暴发生之前出现明显的风速突然降低和风向转换；（3）同塔里木盆地其它区域一样，塔中沙尘暴也可分为5种类型，其主导类型为冷空气东灌型；（4）沙尘暴时间变化规律明显，且从20世纪90年代至21世纪初，塔中沙尘暴日数与持时明显下降，同全疆的变化趋势一致。     

The greening of brownfields in American cities

The redevelopment of brownfields has become a central component of government efforts to revitalize many US cities. While the focus of these efforts has concentrated on promoting industrial and commercial redevelopment, some cities have started to also consider converting brownfields into parks and open space as part of a more comprehensive renewal strategy. Based on a survey of 20 case studies, this paper identifies and discusses: (1) the primary issues involved in brownfield greening projects; (2) the benefits of such projects; and (3) the specific planning processes involved. The overall conclusion drawn from the survey is that numerous renewal‐oriented benefits can ensue from greening projects, if there is extensive stakeholder commitment devoted to deal with its financial and development‐oriented challenges.     

Simple models for phosphorus loss from manure during rainfall

Mechanistic, predictive equations for phosphorus (P) transport in runoff from manure-applied fields constitute a critical knowledge gap for developing nonpoint-source pollution models. We derived two simple equations to describe the P release from animal manure during a rainfall event-one based on first-order P desorption kinetics and one based on second-order kinetics. The manure characteristics needed in the two kinetic equations are the maximum amount of water-extractable phosphorus (WEP) and a characteristic desorption time. Water-extractable P can be measured directly but currently the characteristic time can only be obtained by fitting experimental data. In addition, we evaluated two models usually used to estimate P loss from soil, the Elovitch equation and power function, both of which relate P loss to time. The models were tested against previously published data of P release from different manures under laboratory conditions. All equations fit the data well. Of the two kinetic equations, the second-order model showed better agreement with the data than the first-order model; for example, maximum relative differences between the model results and measured data were 2.6 and 4.7%, respectively. The characteristic times varied between 20 min for dairy manure and almost 100 min for poultry manure. The characteristic time did not appear to change with flow rate but decreased with smaller manure aggregates. The parameters for power-function relationships could not be related to measured manure characteristics. These results provide the first step to process-based approximations for predicting P release from manure with time during rainfall shortly after land application, when P losses are the greatest.     

Hazard property classification of waste according to the recent propositions of the EC using different methods

Hazard classification of waste is a necessity, but the hazard properties (named “H” and soon “HP”) are still not all defined in a practical and operational manner at EU level. Following discussion of subsequent draft proposals from the Commission there is still no final decision. Methods to implement the proposals have recently been proposed: tests methods for physical risks, test batteries for aquatic and terrestrial ecotoxicity, an analytical package for exhaustive determination of organic substances and mineral elements, surrogate methods for the speciation of mineral elements in mineral substances in waste, and calculation methods for human toxicity and ecotoxicity with M factors.In this paper the different proposed methods have been applied to a large assortment of solid and liquid wastes (>1 0 0).Data for 45 wastes – documented with extensive chemical analysis and flammability test – were assessed in terms of the different HP criteria and results were compared to LoW for lack of an independent classification. For most waste streams the classification matches with the designation provided in the LoW. This indicates that the criteria used by LoW are similar to the HP limit values.This data set showed HP 14 ‘Ecotoxic chronic’ is the most discriminating HP. All wastes classified as acute ecotoxic are also chronic ecotoxic and the assessment of acute ecotoxicity separately is therefore not needed. The high number of HP 14 classified wastes is due to the very low limit values when stringent M factors are applied to total concentrations (worst case method). With M factor set to 1 the classification method is not sufficiently discriminating between hazardous and non-hazardous materials. The second most frequent hazard is HP 7 ‘Carcinogenic’. The third most frequent hazard is HP 10 ‘Toxic for reproduction’ and the fourth most frequent hazard is HP 4 “Irritant – skin irritation and eye damage”. In a stepwise approach, it seems relevant to assess HP 14 first, then, if the waste is not classified as hazardous, to assess subsequently HP 7, HP 10 and HP 4, and then if still not classified as hazardous, to assess the remaining properties.The elements triggering the HP 14 classification in order of importance are Zn, Cu, Pb, Cr, Cd and Hg. Progress in the speciation of Zn and Cu is essential for HP 14. Organics were quantified by the proposed method (AFNOR XP X30-489) and need no speciation. Organics can contribute significantly to intrinsic toxicity in many waste materials, but they are only of minor importance for the assessment of HP 14 as the metal concentrations are the main HP 14 classifiers. Organic compounds are however responsible for other toxicological characteristics (hormone disturbance, genotoxicity, reprotoxicity…) and shall be taken into account when the waste is not HP 14 classified.