Emergy as a tool for Ecodesign: evaluating materials selection for beverage packages in Brazil

The life of a product begins with the initial product design concepts; the costs and potential impacts of a product are heavily influenced by the final design, the production processes, the economic and environmental costs of all raw materials. Additionally, both of these factors are very much affected by how the products are managed during and after consumer usage. Thus, there is an urgent need for a tool to facilitate the integration and assessment of environmental and economic demands into the product planning and development processes. The introduction of environmental accounting based on emergy as a tool to assist in product design is proposed. This complementary tool may be inserted into the conventional design methodology to facilitate in the selection of materials and processes as well as in the actual design of the products. To illustrate the application of the proposed method for material selection, PET (polyethylene terephthalate) bottles and aluminum cans for beverage packaging are compared. Despite the exceptional condition of aluminum recycling in Brazil, results show that the best option for beverage packages is the PET bottles.     

Simulation and life cycle assessment of process design alternatives for biodiesel production from waste vegetable oils

This study uses the process simulator ASPEN Plus^® and Life Cycle Assessment (LCA) to compare three process design alternatives for biodiesel production from waste vegetable oils that are: the conventional alkali-catalyzed process including a free fatty acids (FFAs) pre-treatment, the acid-catalyzed process, and the supercritical methanol process using propane as co-solvent. Results show that the supercritical methanol process using propane as co-solvent is the most environmentally favorable alternative. Its smaller steam consumption in comparison with the other process design alternatives leads to a lower contribution to the potential environmental impacts (PEI’s). The acid-catalyzed process generally shows the highest PEI’s, in particular due to the high energy requirements associated with methanol recovery operations.     

A novel gas purification system for biologically produced gases

A novel gas purification system employing membrane contactors with dense membranes in the absorption as well as the desorption unit has been tested concerning the separation efficiency of CO₂. The separation efficiency of potassium carbonate (K₂CO₃) promoted by piperazine (PZ) as absorption medium has been tested in the absorption unit. Since the absorbent will be regenerated in the desorption unit, the influence of temperature, sweep flow rate and absorbent type (0.5 M K₂CO₃ and 0.5 M K₂CO₃/0.5 M PZ) on the separation efficiency of CO₂ in the desorption unit has been investigated. Desorption by vacuum has been considered as well.In addition experimental results of the coupling of a bioreactor producing hydrogen by anoxygenic photosynthesis (low and fluctuating product gas flow rates and fluctuating compositions) with a membrane contactor for gas purification are reported. This was done in order to show the applicability of this system to processes producing biogases.     

The importance of auditory-visual interaction in the construction of ‘tranquil space’

In a world of sensory overload, it is becoming increasingly important to provide environments that enable us to recover our sense of well being. Such restorative (‘tranquil’) environments need to comprise sufficient sensory stimulation to keep us engaged, whilst at the same time providing opportunity for reflection and relaxation. One essential aspect in safeguarding existing, or developing new ‘tranquil space’, is understanding the optimum relationship between the soundscape and the visual composition of a location. This research represents a first step in understanding the effects of audio-visual interaction on the perception of tranquillity and identifies how the interpretation of acoustic information is an integral part of this process. By using uni and bi-modal auditory-visual stimuli in a two stage experimental strategy, it has been possible to measure the key components of the tranquillity construct. The findings of this work should be of particular interest to those charged with landscape management, such as National Park Authorities, Regional Councils, and other agencies concerned with providing and maintaining public amenity.     

Effects of particle size on chemical speciation and bioavailability of copper to earthworms (Eisenia fetida) exposed to copper nanoparticles

To investigate the role of particle size on the oxidation, bioavailability, and adverse effects of manufactured Cu nanoparticles (NPs) in soils, we exposed the earthworm Eisenia ferida to a series of concentrations of commercially produced NPs labeled as 20- to 40-nm or < 100-nm Cu in artificial soil media. Effects on growth, mortality, reproduction, and expression of a variety of genes associated with metal homeostasis, general stress, and oxidative stress were measured. We also used X-ray absorption spectroscopy and scanning X-ray fluorescence microscopy to characterize changes in chemical speciation and spatial distribution of the NPs in soil media and earthworm tissues. Exposure concentrations of Cu NPs up to 65 mg kg(-1) caused no adverse effects on ecologically relevant endpoints. Increases in metallothionein expression occurred at concentrations exceeding 20 mg kg(-1) of Cu NPs and concentrations exceeding 10 mg kg(-1) of CuSO4. Based on the relationship of Cu tissue concentration to metallothionein expression level and the spatial distribution and chemical speciation of Cu in the tissues, we conclude that Cu ions and oxidized Cu NPs were taken up by the earthworms. This study suggests that oxidized Cu NPs may enter food chains from soil but that adverse effects in earthworms are likely to occur only at relatively high concentrations (> 65 mg Cu kg(-1) soil).     

Decontamination of water polluted by heavy metals with Taro (Colocasia esculenta) cultured in a hydroponic NFT system

The toxicity and bioaccumulation of two heavy metals—lead (Pb) and cadmium (Cd)—in a semi-aquatic plant, Colocasia esculenta (L. Schott), from a synthetic heavy metal solution were studied. Young plants of equal size were grown hydroponically in shallow raceways containing Hoagland medium amended with 20, 40, and 60 mg l^?1 of Pb and 2, 4, and 6 mg l^?1 of Cd. The medium containing heavy metals was allowed to flow through the raceways with a change in influent heavy metal solution on every 5th day. The experiment was continued for 20 days. A set of control raceways—one comprised of nutrient medium with heavy metal supplements, devoid of plants, and another with the plants and nutrient medium having no metal supplement—was also simultaneously run. Chlorosis in the leaves was the prominent toxicity symptom observed due to Pb and Cd on the test plants. A significant decrease in the relative growth, biomass productivity, and total chlorophyll content were noticed in the plants with an increase in concentration of metal supplement in the solution and exposure time. Both metals accumulated to higher concentrations in the roots than in shoots, suggesting that the metals were bound to the root cells and their translocation to the leaves was limited. The results of the 20-day-long experiments indicate that from a phytoremediation perspective, C. esculenta is a promising plant species for remediation of wastewater polluted with lower concentrations of Pb and Cd.     

Monitoring Regional Riparian Forest Cover Change Using Stratified Sampling and Multiresolution Imagery1

Claggett, Peter R., Judy A. Okay, and Stephen V. Stehman, 2010. Monitoring Regional Riparian Forest Cover Change Using Stratified Sampling and Multiresolution Imagery. Journal of the American Water Resources Association (JAWRA) 46(2):334-343. DOI: 10.1111/j.1752-1688.2010.00424.x Abstract: The Chesapeake Bay watershed encompasses 165,760 km² of land area with 464,098 km of rivers and streams. As part of the Chesapeake Bay restoration effort, state and federal partners have committed to restoring 26,000 miles (41,843 km) of riparian forest buffers. Monitoring trends in riparian forest buffers over large areas is necessary to evaluate the efficacy of these restoration efforts. A sampling approach for estimating change in riparian forest cover from 1993/1994 to 2005 was developed and implemented in Anne Arundel County, Maryland, to exemplify a method that could be applied throughout the Bay watershed. All stream reaches in the county were stratified using forest cover change derived from Landsat imagery. A stratified random sample of 219 reaches was selected and forest cover change within the riparian buffer of each sampled reach was interpreted from high-resolution aerial photography. The estimated footprint of gross change in riparian forest cover (i.e., the sum of gross gain and gross loss) for the county was 1.83% (SE = 0.22%). Stratified sampling taking advantage of a priori knowledge of locations of change proved to be a practical and efficient protocol for estimating riparian forest buffer change at the county scale and the protocol would readily extend to much broader scale monitoring.     

Evaluating the effectiveness of marine actinobacterial extract and its mediated titanium dioxide nanoparticles in the degradation of azo dyes

Aim of the present study was to synthesize titanium dioxide nanoparticles （YiO2 NPs） from marine actinobacteria and to develop an eco-friendly azo-dye degradation method. A total of five actinobacterial isolates were isolated from Chennai marine sediments, Tamilnadu, India and analyzed for the synthesis of TiO2 NPs using titanium hydroxide. Among these, the isolate PSV 3 showed positive results for the synthesis of TiO2 NPs, which was confirmed by UV analysis. Further characterization of the synthesized TiO2 NPs was done using XRD, AFM and FI＇-IR analysis. Actinobacterial crude extract and synthesized TiO2 NPs was found efficient in degrading azo dye such as Acid Red 79 （AR-79） and Acid Red 80 （AR-80）. Degradation percentage was found to be 81% for AR-79, 83% for AR-80 using actinobacterial crude extract and 84% for AR-79, 85% for AR-80 using TiO2 NPs. Immobilized actinobacterial ceils showed 88% for AR-79 and 81% for AR- 80, dye degrading capacity. Degraded components were characterized by FT-IR and GC-MS analysis. The phytotoxicity test with 500 μg/mL of untreated dye showed remarkable phenotypic as well as cellular damage to Tagetes erecta plant. Comparatively no such damage was observed on plants by degraded dye components. In biotoxicity assay, treated dyes showed less toxic effect as compared to the untreated dyes.