Chemie und Technik altkretischer Vasenmalerei vom Kamares-Typ

Fragments of the Kamares-type ware were investigated by means of the scanning electron microscope, energy-dispersive X-ray microanalysis, and the Debye-Scherrer process. The black “Firnis” or “Urfirnis” of the decoration proved to be a silicate-type glaze which had a high content of iron and contained potassium as a flux. The body was given a high calcium content, so that its coefficient of expansion was increased and approximated to that of the glaze. The white was produced by means of talc. Firing must have taken place at a temperature of at least about 1000 °C. The red painting contains as its pigment iron oxides or hydroxides and may have been applied with an organic binding medium after the firing operation.[/p][/ab]     

Effects of chronic exposure to radiofrequency electromagnetic fields on energy balance in developing rats

The effects of radiofrequency electromagnetic fields (RF-EMF) on the control of body energy balance in developing organisms have not been studied, despite the involvement of energy status in vital physiological functions. We examined the effects of chronic RF-EMF exposure (900 MHz, 1 V?m^?1) on the main functions involved in body energy homeostasis (feeding behaviour, sleep and thermoregulatory processes). Thirteen juvenile male Wistar rats were exposed to continuous RF-EMF for 5 weeks at 24 °C of air temperature (T _a) and compared with 11 non-exposed animals. Hence, at the beginning of the 6th week of exposure, the functions were recorded at T _a of 24 °C and then at 31 °C. We showed that the frequency of rapid eye movement sleep episodes was greater in the RF-EMF-exposed group, independently of T _a (+42.1 % at 24 °C and +31.6 % at 31 °C). The other effects of RF-EMF exposure on several sleep parameters were dependent on T _a. At 31 °C, RF-EMF-exposed animals had a significantly lower subcutaneous tail temperature (?1.21 °C) than controls at all sleep stages; this suggested peripheral vasoconstriction, which was confirmed in an experiment with the vasodilatator prazosin. Exposure to RF-EMF also increased daytime food intake (+0.22 g?h^?1). Most of the observed effects of RF-EMF exposure were dependent on T _a. Exposure to RF-EMF appears to modify the functioning of vasomotor tone by acting peripherally through α-adrenoceptors. The elicited vasoconstriction may restrict body cooling, whereas energy intake increases. Our results show that RF-EMF exposure can induce energy-saving processes without strongly disturbing the overall sleep pattern.     

Aspects on the analysis of 210Po

There has been little development regarding analysis of polonium (Po) in environmental samples since the 1960ies. This is due to the straightforward spontaneous deposition of this element on silver (Ag), nickel (Ni) or copper (Cu) without any radiochemical separation. For many years, no radiochemical yield determinant was used and it was generally supposed that the yield was 100% after two depositions. Counting was often done using ZnS scintillation counter coupled to a photomultiplier tube. However, the use of the yield determinants ²⁰⁸Po and ²⁰⁹Po and the development of alpha spectrometry showed that the yield was lower. Furthermore, the tendency of Po to volatilize at low temperatures constrains the sample preparation techniques; dry-ashing cannot be used. But during the wet-ashing procedure, there are still some losses.The aim of this study was to evaluate the Po losses during wet-ashing by the use of a double-tracer technique. We have found that the losses were about 30% when open glass beakers were used and about 17% when the samples were digested in microwave oven. When long-necked bottles (Kjeldahl flasks) were used, a loss of about 20% was registered.It has also been observed that ²¹⁰Pb to some extent is plating out together with its daughter nuclide Po during the electrochemical deposition. This will result in a systematic error since an unknown amount of supported ²¹⁰Po will be produced from the ²¹⁰Pb decay depending on the fraction of ²¹⁰Pb being deposited on the disc and the waiting time between deposition and measurement of the sample. A further consequence of this is that in the assessment of the ²¹⁰Pb content in the sample, very often the remaining liquid is stored after deposition for build-up of ²¹⁰Po. Since some ²¹⁰Pb is lost on the disc, the result for ²¹⁰Pb will be too low. Both these systematic errors give rise to a too high ²¹⁰Po/²¹⁰Pb ratio. The fraction of ²¹⁰Pb which is plating out has been assessed in this study for different matrices and is about 50-90%. During the measurement by solid state Si-detectors, some Po is evaporated in the vacuum conditions contaminating the detectors. Experiments have here been done by heating the discs after deposition which indicate that less Po is evaporated from Ag than from Ni. The losses from Ag are less than that from the other metals probably due to a deeper penetration into the surface of Po. We conclude that in most aspects, Ag is better to use than the other plating metals.     

Transport modes and pathways of the strongly sorbing pesticides glyphosate and pendimethalin through structured drained soils

Leaching of the strongly sorbing pesticides glyphosate and pendimethalin was evaluated in an 8-month field study focussing on preferential flow and particle-facilitated transport, both of which may enhance the leaching of such pesticides in structured soils. Glyphosate mainly sorbs to mineral sorption sites, while pendimethalin mainly sorbs to organic sorption sites. The two pesticides were applied in equal dosage to a structured, tile-drained soil, and the concentration of the pesticides was then measured in drainage water sampled flow-proportionally.The leaching pattern of glyphosate resembled that of pendimethalin, suggesting that the leaching potential of pesticides sorbed to either the inorganic or organic soil fractions is high in structured soils. Both glyphosate and pendimethalin leached from the root zone, with the average concentration in the drainage water being 3.5 and 2.7 μg L⁻¹, respectively. Particle-facilitated transport (particles >0.24 μm) accounted for only a small proportion of the observed leaching (13-16% for glyphosate and 16-31% for pendimethalin). Drain-connected macropores located above or in the vicinity of the drains facilitated very rapid transport of pesticide to the drains. That the concentration of glyphosate and pendimethalin in the drainage water remained high (>0.1 μg L⁻¹) for up to 7 d after a precipitation event indicates that macropores between the drains connected to underlying fractures were able to transport strongly sorbing pesticides in the dissolved phase. Lateral transport of dissolved pesticide via such discontinuities implies that strongly sorbing pesticides such as glyphosate and pendimethalin could potentially be present in high concentrations (>0.1 μg L⁻¹) in both water originating from the drainage system and the shallow groundwater located at the depth of the drainage system.     

Life cycle assessment of the waste hierarchy--a Danish case study on waste paper

The waste hierarchy is being widely discussed these days, not only by cost-benefit analysts, but a growing number of life cycle assessments (LCA) have also begun to question it. In this article, we investigate the handling of waste paper in Denmark and compare the present situation with scenarios of more waste being recycled, incinerated or consigned to landfill. The investigations are made in accordance with ISO 14040-43 and based on the newly launched methodology of consequential LCA and following the recent guidelines of the European Centre on Waste and Material Flows. The LCA concerns the Danish consumption of paper in 1999, totalling 1.2 million tons. The results of the investigation indicate that the waste hierarchy is reliable; from an environmental point of view recycling of paper is better than incineration and landfilling. For incineration, the reason for the advantage of landfilling mainly comes from the substitution of fossil fuels, when incinerators provide heat and electricity. For recycling, the advantage is related to the saved wood resources, which can be used for generating energy from wood, i.e., from renewable fuel which does not contribute to global warming.     

A distance dependent contagion function for vector-based data

Landscape pattern is of primary interest to landscape ecologists and landscape metrics are used to quantify landscape pattern. Metrics are commonly defined and calculated on raster-based land cover maps. One metric is the contagion, existing in several versions, e.g., unconditional and conditional, used as a measure of fragmentation. However, mapped data is sometimes in vector-based format or there may be no mapped data but only a point sample. In this study a definition of contagion for such cases is investigated. The metric is an extension of the usual contagion, based on pairs of points at varying distances and gives a function of the distance. In this study the extended contagion is calculated for vector-based delineated real landscapes and for simulated ones. Both unconditional and conditional contagions are studied using two classification systems. The unconditional contagion function was decreasing and convex, with upper and lower limits highly correlated to the Shannon diversity index, thus carrying only area proportion information. The spatial information lies in the speed by which the function converges to the lower limit; using a proxy function this can be expressed by a single parameter b, with high values for fragmented landscapes. No proxy function was found for the conditional contagion, for which only qualitative information was found. The extended contagion is applicable both in patch mosaic models of landscapes and in gradient-based models, where landscape characteristics change continuously without distinct borders between patches. The extended contagion can be useful in sample based surveys where there no map of the entire landscape is available.