Characterization and pollutant removal efficiency of biochar derived from baggase,bamboo and tyre

Conversion of broad-spectrum organic waste into carbonaceous biochar has gained enormous interest in past few years. The present study aims to characterize feedstock (FS), i.e. bagasse (Bg), bamboo (Bm) and biochar (BC), i.e. baggase biochar (BBg), bamboo biochar (BBm) and tyre biochar (Ty). Significant changes in elemental composition, atomic ratio, proximate analyses, mineral content and heavy metal content were observed which was well supported by Fourier transform infrared (FTIR) spectroscopy and X-ray diffraction (XRD) analysis. Impregnation with ferric hydroxide was done, and resultant modified biochars (MBC), i.e. iron-impregnated baggase biochar (FeBBg), iron-impregnated bamboo biochar (FeBBm) and iron-impregnated tyre biochar (FeTy), along feedstock and biochar were used for PO₄ ^3?, Pb, Hg and Cu adsorption. In general, BBg, FeBBg, BBm, FeBBm, Ty and FeTy were found to adsorb PO₄ ^3?, Pb, Hg and Cu better than Bg and Bm, except in few cases. Results from adsorption experiments were fitted into Langmuir, Freundlich and Temkin models of isotherms and pseudo-first-order, pseudo-second-order and Elovich models of kinetics. Result of batch study adsorption revealed that maximum adsorption of PO₄ ^3?, Pb, Hg and Cu was done by FeBBg (adsorption mechanism explained by Freundlich model), FeTy (Temkin model), Ty (Langmuir model) and BBm (Langmuir model) respectively. According to R ² values, pseudo-first-order reaction was well suited to PO₄ ^3?, Pb, Hg and Cu adsorption. The optimum pH for maximum adsorption was observed to be 7.4 for PO₄ ^3?, 5 for Cu and 6 for Pb and Hg respectively     

Ggum-poly(Itaconic Acid) Based Superabsorbents Via Two-Step Free-Radical Aqueous Polymerization for Environmental and Antibacterial Applications

Ggum-based conducting hydrogels possessing dye removal and antibacterial property were developed by two-step free-radical aqueous polymerization method. Conductivity was introduced with polyaniline (PANI) chains incorporated within the crosslinked network of Ggum-poly(itaconic acid) superabsorbent. The material properties of the synthesized samples were characterized using FTIR spectroscopy, thermal analysis and scanning electron microscopy techniques. Results showed that synthesized samples exhibited the best antibacterial activity against Gram-positive bacteria. Synthesized samples were found to be effective in removal of toxic methylene blue (MB) dye from the waste water. The adsorption kinetics of superabsorbents has been described by using pseudo first and pseudo second order kinetics models. Furthermore, application of hydrogels to improve the water retention properties of different soils was also studied for agricultural purpose.     

Application of ameliorated wood pulp to recover Cd(II), Pb(II), and Ni(II) from e-waste

In this study, dl-malic acid and hydrogen peroxide were used as leaching agents to remove metals from e-waste (printed-circuit boards) and itaconic acid-grafted poly(vinyl alcohol)-encapsulated wood pulp (IA-g-PVA-en-WP) to uptake metals from leachate with high proficiency [11.63 mg g^?1; 93.03 % for Cd(II), 11.90 mg g^?1; 95.18 % for Pb(II), and 12.14 mg g^?1; 97.08 % for Ni(II)]. Metals were recovered from the loaded biosorbent by desorption studies. The standard analytical techniques, such as elemental analysis, Fourier-transform-infrared spectroscopy, scanning electron microscopy, atomic force microscopy, and thermogravimetric analysis, were used to characterize the recovering agent (biosorbent). At equilibrium, the metal uptake data were fitted to Langmuir and D–R isotherms (R ² > 0.99) significantly, revealing, the homogeneous distribution of active sites on biosorbent’s backbone. The possible mechanism appeared to be ion exchanges of metal ions with H⁺ together with binding over functionalities (COO^?). Dimensionless equilibrium parameter (R _L) showed the favourability of metal uptake at lower concentration, while mean adsorption energy (E) certified the physical binding of metal on functionalities which was further confirmed by sticking probability and activation energy parameters. Reusability studies were also conducted to state the performance of biosorbent.     

A performance-based tabular approach for joint systematic improvement of risk control and resilience applied to telecommunication grid,gas network,and ultrasound localization system

Environment Systems and Decisions - Organizational and technical approaches have proven successful in increasing the performance and preventing risks at socio-technical systems at all scales....     

Optimization of pretreatment conditions for enhanced sugar release

Present investigation was done to evaluate various algal genera found in water bodies of Varanasi city. The potential of any biomass for biofuels (bioalcohols, biohydrogen, etc.) production depends on the quantity of extractable sugar present in it. Acid (H₂SO₄) and alkali (NaOH) pretreatment were performed, and H₂SO₄ was chosen due to its nearly double yield as compared with alkaline pretreatment. Response surface methodology was utilized for the optimization of operating parameters such as treatment temperature, time, and acid concentration. Sugar yield up to 0.33 g/g of dry biomass was obtained using cyanobacterial biomass of Lyngbya limnetica, at 100°C, 59.19 min, and H₂SO₄ concentration of 1.63 M.     

Climate change impact and potential adaptation strategies under alternate climate scenarios for yam production in the sub-humid savannah zone of West Africa

Globally, yam (Dioscorea spp.) is the fifth most important root crop after sweet potatoes (Ipomoea batatas L.) and the second most important crop in Africa in terms of production after cassava (Manihot esculenta L.) and has long been vital to food security in sub-Saharan Africa (SSA). Climate change is expected to have its most severe impact on crops in food insecure regions, yet very little is known about impact of climate change on yam productivity. Therefore, we try estimating the effect of climate change on the yam (variety: Florido) yield and evaluating different adaptation strategies to mitigate its effect. Three regional climate models REgional MOdel (REMO), Swedish Meteorological and Hydrological Institute Regional Climate Model (SMHIRCA), and Hadley Regional Model (HADRM3P) were coupled to a crop growth simulation model namely Environmental Policy Integrated Climate (EPIC) version 3060 to simulate current and future yam yields in the Upper Ouémé basin (Benin Republic). For the future, substantial yield decreases were estimated varying according to the climate scenario. We explored the advantages of specific adaptation strategies suggesting that changing sowing date may be ineffective in counteracting adverse climatic effects. Late maturing cultivars could be effective in offsetting the adverse impacts. Whereas, by coupling irrigation and fertilizer application with late maturing cultivars, highest increase in the yam productivity could be realized which accounted up to 49 % depending upon the projection of the scenarios analyzed.     

Design of reaction conditions for the enhancement of microbial degradation of dyes in sequential cycles

The present study evaluated the potential of white-rot fungal strain Coriolus versicolor to decolorize five structurally di erent dyes in sequential batch reactors under optimized conditions. The experiments were run continuously for seven cycles of 8 d each. High decolorizing activity was observed even during the repeated reuse of the fungus, especially when the old medium was replaced with fresh medium after every cycle. Biodegradation was the dominating factor as the fungus was able to produce the enzyme laccase mainly, to mineralize synthetic dyes. The nutrients and composition of the medium played important roles in sustaining the decolorisation potential of the fungus. Corncob was found be an easy and cheap substitute for carbon source for the fungus. Glucose consumption by the fungus was in accordance to its decolorisation activity and chemical oxygen demand (COD) reduction.     

Consistency of effects of tropical‐forest disturbance on species composition and richness relative to use of indicator taxa

Lawton et al. (1998) found, in a highly cited study, that the species richness of 8 taxa each responds differently to anthropogenic disturbance in Cameroon forests. Recent developments in conservation science suggest that net number of species is an insensitive measure of change and that understanding which species are affected by disturbance is more important. It is also recognized that all disturbance types are not equal in their effect on species and that grouping species according to function rather than taxonomy is more informative of responses of biodiversity to change. In a reanalysis of most of the original Cameroon data set (canopy and ground ants, termites, canopy beetles, nematodes, and butterflies), we focused on changes in species and functional composition rather than richness and used a more inclusive measure of forest disturbance based on 4 component drivers of change: years since disturbance, tree cover, soil compaction, and degree of tree removal. Effects of disturbance on compositional change were largely concordant between taxa. Contrary to Lawton et al.’s findings, species richness for most groups did not decline with disturbance level, providing support for the view that trends in species richness at local scales do not reflect the resilience of ecosystems to disturbance. Disturbance affected species composition more strongly than species richness for butterflies, canopy beetles, and litter ants. For these groups, disturbance caused species replacements rather than just species loss. Only termites showed effects of disturbance on species richness but not composition, indicating species loss without replacement. Although disturbance generally caused changes in composition, the strength of this relationship depended on the disturbance driver. Butterflies, litter ants, and nematodes were correlated with amount of tree cover, canopy beetles were most strongly correlated with time since disturbance, and termites were most strongly correlated with degree of soil disturbance. There were moderately divergent responses to disturbance between functional feeding groups. Disturbance was most strongly correlated with compositional differences of herbivores within beetles and nematodes and humus feeders within termites. Our results suggest that consideration of the impact of different forms of disturbance on species and functional composition, rather than on net numbers of species, is important when assessing the impacts of disturbance on biodiversity.     

The effects of meteorological parameters in ambient noise modelling studies in Delhi

The acoustic environment in urban areas has gained prominence in recent times due to rapid industrial and commercial development in metropolitan cities. Various attempts have been made to predict and model the trends in urban ambient noise levels using different statistical and dynamic models. The present study makes an attempt to examine the role of meteorological parameters affecting the ambient noise levels in Delhi. The results show significant improvement in overall noise scenario of Delhi since the introduction of compressed natural gas vehicles in public transport of Delhi. The noise level is significantly reduced by high vegetation cover as well as by low relative humidity over Delhi. The regression models developed for the present study clearly show the significant contribution of meteorological parameters in governing the ambient noise levels in Delhi.     

Arsenic occurrence and accumulation in soil and water of eastern districts of Uttar Pradesh, India

Arsenic in the soil and water of eastern districts of Uttar Pradesh (Ballia and Ghazipur) was estimated. Survey results revealed that arsenic in soil samples ranged from 5.40 to 15.43 parts per million (ppm). In water samples, it ranged from 43.75 to 620.75 parts per billion (ppb) which far exceeded the permissible limit of 10 ppb as recommended by the World Health Organization. Maximum concentration of arsenic in water was found in Haldi village of Ballia (620.75 ppb). However, mean arsenic concentration in water followed the order: Karkatpur (257.21 ppb) < Haldi (310.15 ppb) < Sohaon (346.94 ppb) < Dharmarpur (401.75 ppb). In case of soil, maximum arsenic was detected in soil of Sohaon (15.43 ppm). Mean arsenic levels in soils followed the order: Karkatpur (9.24 ppm) < Haldi (9.82 ppm) < Dharmarpur (11.32 ppm) < Sohaon (14.08 ppm). Arsenic levels were higher in soils collected from 15–30 cm depth than 0–15 cm from the soil surface.