Composition and distribution of surfactants around Lake Chini,Malaysia

This study aims to determine the composition of surfactants in the lake surface microlayer, rainwater, and atmospheric aerosols in the area surrounding Lake Chini, Pahang. Surfactants in the lake surface microlayer were taken from seven different stations around the lake, while samples of rainwater were taken from five different sampling stations. The samples of atmospheric aerosols were collected from the Lake Chini Research Centre which is in close proximity to the lake. The colorimetric analysis method was used to determine the composition and concentration of anionic surfactants as methylene blue active substances (MBAS) and cationic surfactants as disulphine blue active substances (DBAS). The concentration of anionic surfactants, as MBAS, in the surface microlayer ranged between 0.08 to 0.23 μmol L^− 1, while the range of concentration of cationic surfactants as DBAS ranged from 0.09 to 0.11 μmol L^− 1. The concentration of MBAS was higher in rainwater when compared to surfactants in the lake surface microlayer. The high concentration of surfactants in the fine mode of atmospheric aerosols suggests that natural and anthropogenic sources of surfactants contribute to the atmospheric surfactants.     

Seasonal variation of different microorganisms with nickel and cadmium in the industrial wastewater and agricultural soils

Wastewater and soil samples were collected from the industrial area of Ghaziabad City, India from January 2005 to December 2007 and were analyzed for the presence of heavy metals by atomic absorption spectrophotometry. Test samples revealed high levels of Fe, Cr, Cu, Ni, Zn, and Cd as 967.03, 34.63, 27.97, 19.7, 16.70, and 3.20 mg/L of wastewater, respectively. The concentrations of inorganic minerals were higher in the soil samples irrigated with wastewater. Total coliforms were found to be maximum (1,133 × 10⁴ most probable number per 100 mL) during spring and summer followed by winter and postmonsoon in the wastewater samples. The microbial count in soil as well as in wastewater decreases as the metal concentration increases. The concentration 200 μg/mL of nickel and cadmium inhibits majority of the population, while, at some points, it inhibits 100% of the population. The exponential decay model for microbial count at the increasing metal concentrations indicate that asymbiotic N₂ fixers were best fitted to the model. In all the seasons, the order of decline in terms of exponential decay of the population of different microbial groups in soil was asymbiotic N₂ fixers > actinomycetes > fungi > aerobic heterotrophic bacteria. The different microbial groups that have different values of slope in different seasons indicate that the resistant population of microorganisms was variable with seasons.     

Sandbar-regulated hydrodynamic influences on river hydrochemistry at Mengabang Telipot River, Peninsular Malaysia

Influences of river hydrodynamic behaviours on hydrochemistry (salinity, pH, dissolved oxygen saturations and dissolved phosphorus) were evaluated through high spatial and temporal resolution study of a sandbar-regulated coastal river. River hydrodynamic during sandbar-closed event was characterized by minor dependency on tidal fluctuations, very gradual increase of water level and continual low flow velocity. These hydrodynamic behaviours established a hydrochemistry equilibrium, in which water properties generally were characterized by virtual absence of horizontal gradients while vertical stratifications were significant. In addition, the river was in high trophic status as algae blooms were visible. Conversely, river hydrodynamic in sandbar-opened event was tidal-controlled and showed higher flow velocity. Horizontal gradients of water properties became significant while vertically more homogenised and with lower trophic status. In essence, this study reveals that estuarine sandbar directly regulates river hydrodynamic behaviours which in turn influences river hydrochemistry.     

Fluoride contamination in drinking water in rural habitations of Central Rajasthan, India

Fluoride concentration in groundwater sources used as major drinking water source in rural area of block Nawa (Nagaur District), Rajasthan was examined and the toxic effects by intake of excess fluoride on rural habitants were studied. In block 13, habitations (30%) were found to have fluoride concentration more than 1.5 mg/l (viz. maximum desirable limit of Indian drinking water standards IS 10500, 1999). In five habitations (11%), fluoride concentration in groundwater is at toxic level (viz. above 3.0 mg/l). The maximum fluoride concentration in the block is 5.91 mg/l from Sirsi village. As per the desirable and maximum permissible limit for fluoride in drinking water, determined by World Health Organization or by Bureau of Indian Standards, the groundwater of about 13 habitations of the studied sites is unfit for drinking purposes. Due to the higher fluoride level in drinking water, several cases of dental and skeletal fluorosis have appeared at alarming rate in this region. There is an instant need to take ameliorative steps in this region to prevent the population from fluorosis. Groundwater sources of block Nawa can be used for drinking after an effective treatment in absence of other safe source. The evaluation of various defluoridation methods on the basis of social and economical structure of India reveals that the clay pot chip, activated alumina adsorption, and Nalgonda techniques are the most promising.     

Toxic responses in primary rat hepatocytes exposed with occupational dust collected from work environment of bone-based industrial unit

In this in vitro study we investigated the toxic responses in hepatocytes treated with occupational dust to which workers are exposed in bone-based industrial units. The present study investigated the toxicity mechanism of bone-based occupational dust, from a particular industrial unit, on isolated rat hepatocytes. The hepatocytes were isolated by collagenase perfusion method and cell viability was determined by trypan blue exclusion and MTT [3-(4,5-dimethyl thiazol-2-yl)-2,5-diphenyl tetrazolium bromide] assay treated with occupational dust at 0.1-1.0 mgmL(-1), for 120 min. The cell viability decreased significantly in a concentration-dependent manner. Dust induced significant membrane damage measured by lactate dehydrogenase (LDH) and glutathione (GSH) release in culture media for 30-, 60- and 120 min treatment duration. The toxicity was found to be correlated with the induction of lipid peroxidation (LPO). In addition, nitric oxide (NO), and hydrogen peroxide (H(2)O(2)) generation by occupational dusts were also found to be time- and concentration-dependent. Over all the present study provides initial evidences for the toxic potential of occupational dust generated in bone-based industries and, therefore, the dust exposure to workers in unorganized industrial units should be controlled.     

Inherent risk assessment—A new concept to evaluate risk in preliminary design stage

Quantitative Risk Assessment (QRA) has been a very popular and useful methodology which is widely accepted by the industry over the past few decades. QRA is typically carried out at a stage where complete plant has been designed and sited. At that time, the opportunity to include inherent safety design features is limited and may incur higher cost. This paper proposes a new concept to evaluate risk inherent to a process owing to the chemical it uses and the process conditions. The risk assessment tool is integrated with process design simulator (HYSYS) to provide necessary process data as early as the initial design stages, where modifications based on inherent safety principles can still be incorporated to enhance the process safety of the plant. The risk assessment tool consists of two components which calculate the probability and the consequences relating to possible risk due to major accidents. A case study on the potential explosion due to the release of flammable material demonstrates that the tool is capable to identify potential high risk of process streams. Further improvement of the process design is possible by applying inherent safety principles to make the process under consideration inherently safer. Since this tool is fully integrated with HYSYS, re-evaluation of the inherent risk takes very little time and effort. The new tool addresses the lack of systematic methodology and technology, which is one of the barriers to designing inherently safer plants.     

Community attitudes toward forest conservation programs through collaborative protected area management in Bangladesh

The formulation of conservation policies with options for creating protected areas is significantly influenced by the social factors of the surrounding communities. Therefore, indigenous knowledge, attitudes and perceptions of the local communities need to be explored during the planning and implementation stages of conservation projects. A government-initiated experiment in co-management was conducted in the Rema-Kalenga Wildlife Sanctuary, Bangladesh. This paper analyzes the attitudes toward conservation by members of local communities living in and around the wildlife sanctuary. Training incentives on alternative income-generating (AIG) activities and allotment of agricultural lands were distributed among the Forest User Groups. It is of interest to policy makers and resource managers whether this technique leads to improved attitudes on the part of local people. Although there were different attitudes toward protected areas and conservation, overall, a favorable attitude of the respondents was observed. The opinions of respondents also varied based on factors such as village position, village dependency level on forest resources, ethnicity and gender. Increase in annual income resulting from the augmented skills by trainings on AIG activities and getting agricultural lands leased from the Forest Department contributed significantly to the variation in respondents’ conservation attitudes. It is suggested that eliminating inequity and inequality in incentive distribution, discovering and launching training on more need-based livelihood activities, and liberalizing the restriction of resource extraction from the protected area by fixing the harvesting limit would encourage the community to be more cordially and actively involved in the conservation efforts of the sanctuary.     

The relative importance of factors influencing the adoption of sustainable agricultural practices: a factor approach for Malaysian vegetable farmers

This study develops the understanding of the adoption of sustainable agricultural practices (SAPs) by investigating the relative importance of a set of multidimensional factors in the Malaysian vegetable production sector. A factor approach is deployed to identify explanatory indicators within an integrative framework that is synthesized from the theory of interpersonal behavior and the theory of diffusion of innovation. We achieved this by analyzing a logistic regression model for the adoption of six individual SAPs (conservation tillage, intercropping, cover crops/mulches, crop rotation, organic fertilizers/composts, and integrated pest management). The findings indicate that adoption depends on a range of socio-economic, agro-ecological, institutional, informational, and psychological factors, as well as the perceived attributes of SAPs. Fundamental policy understanding of the issue should, therefore, be multidisciplinary. In addition, standardized coefficients reveal that the impact of statistically significant factors on adoption is unequal. In general, the most influential factor is the asymmetric distribution of resources across geographical locations. This is followed by financial capital and a number of factors, including the workforce size, the usefulness of information, Chinese ethnicity, and the perceived relative advantage of SAPs. Guided by this prioritization understanding, future SAPs promotion now has a better opportunity to target the more important areas. Similar research effort should be made to steer sustainable agriculture internationally.     

An integrated assessment of seawater intrusion in a small tropical island using geophysical,geochemical, and geostatistical techniques

In this study, geophysics, geochemistry, and geostatistical techniques were integrated to assess seawater intrusion in Kapas Island due to its geological complexity and multiple contamination sources. Five resistivity profiles were measured using an electric resistivity technique. The results reveal very low resistivity <1 Ωm, suggesting either marine clay deposit or seawater intrusion or both along the majority of the resistivity images. As a result, geochemistry was further employed to verify the resistivity evidence. The Chadha and Stiff diagrams classify the island groundwater into Ca-HCO₃, Ca-Na-HCO₃, Na-HCO₃, and Na-Cl water types, with Ca-HCO₃ as the dominant. The Mg²⁺/Mg²⁺+Ca²⁺, HCO₃ ^?/anion, Cl^?/HCO₃ ^?, Na⁺/Cl^?, and SO₄ ^2?/Cl^? ratios show that some sampling sites are affected by seawater intrusion; these sampling sites fall within the same areas that show low-resistivity values. The resulting ratios and resistivity values were then used in the geographical information system (GIS) environment to create the geostatistical map of individual indicators. These maps were then overlaid to create the final map showing seawater-affected areas. The final map successfully delineates the area that is actually undergoing seawater intrusion. The proposed technique is not area specific, and hence, it can work in any place with similar completed characteristics or under the influence of multiple contaminants so as to distinguish the area that is truly affected by any targeted pollutants from the rest. This information would provide managers and policy makers with the knowledge of the current situation and will serve as a guide and standard in water research for sustainable management plan.