Identification of priority pharmaceuticals in the water environment of China

In recent years, increasing attention has been paid to the trace-level contamination of pharmaceuticals in the water environment all over the world. Considering a large number of pharmaceuticals used, it is crucial to establish a priority list of pharmaceuticals that should be monitored and/or treated first. In the present study, we developed a ranking system based on the pharmaceutical consumption, removal performance in the wastewater treatment plants (WWTPs) and potential ecological effects, and applied to the situation of China. 39 pharmaceuticals, which had available consumption data and also been reported previously in the WWTPs of China, were selected as candidate pharmaceuticals. Among them, seventeen pharmaceuticals were considered as priority pharmaceuticals, out of which, erythromycin, diclofenac acid and ibuprofen, had the high priority. Compared with other literatures, we found that some pharmaceuticals given concerns to globally should also be included in the priority list in China; while some pharmaceuticals, not mentioned in other literatures, such as cefalexin, ketoconazole, should be also given prior consideration in China. Among all the therapeutic classes, antibiotics, which were grossly abused in China, contributed the most to the priority pharmaceuticals. However, priority antibiotics accounted for only 32% of candidate antibiotics, while 71% and 100% of the candidate anti-inflammatory and antilipidemic respectively were identified as the priority pharmaceuticals, indicating that antibiotics might be overanxiously considered in the previous studies on their behaviors in the WWTPs of China.     

厌氧池-复合型人工湿地系统污水处理效果的季节变化

利用厌氧池-复合型人工湿地(AT-ICW)系统处理农村生活污水,探讨工艺系统不同季节对污水的处理效果。结果表明,该工艺系统春、夏、秋季对氨氮(NH4+-N)、总磷(TP)表现出稳定且较好的去除效果,去除率分别为92.8%～97.0%和56.4%～65.9%,冬季去除率相对较差,平均去除率分别为67.1%和42.5%。NO3--N的去除效果差,四季均出现积累,累积率达到71.5%～342.9%。系统春、夏季对总氮(TN)去除效果较好,去除率为57.3%～68.9%,秋、冬季去除效果相对较差,为24.5%～35.8%。系统夏季COD去除效果好,平均去除率达到78.3%,冬、春季去除效果较差,为37.8%～43.5%。各项污水排放指标均达到城镇污水处理厂污染物排放一级A类标准。AT-ICW系统不仅处理效果好,而且运行费用低,适用于农村分散型生活污水处理。     

As（V）在金红石TiO2颗粒表面吸附特性及机理

通过静态动力学和热力学吸附实验,研究了温度、共存离子以及溶质的初始浓度对As（V）在金红石TiO2颗粒表面吸附的影响,探讨了As（V）在金红石TiO2颗粒表面吸附特性及机理。结果表明,在As（V）初始浓度为10mg／L,pH为7的条件下,25℃时的吸附量0．41mg／g高于30℃时的吸附量0．31mg／g,As（V）在金红石TiO,上的吸附为放热过程。CaCl2和MgCl2的添加对As（V）在金红石TiO2表面吸附起到明显的促进作用。T=25℃,Ca2＋或Mg2＋浓度为10mmol／L时,As（V）吸附量分别为0．64和0．56mg／g,Ca2＋比Mg2＋对As（V）吸附促进作用强。As（V）在金红石TiO2的吸附等温线符合Frendlich方程,Lagergren二级动力学方程能较好地描述As（V）在金红石TiO2颗粒表面吸附的动力学过程。     

Polybrominated diphenyl ethers in surface sediments from principal watersheds of Shanghai, China: levels, distribution, influencing factors, and risk assessment

Fourteen and 17 sediment samples were collected from three main rivers of Shanghai in July and November, respectively. Eight polybrominated diphenyl ether (PBDE) congeners (BDE-28, BDE-47, BDE-99, BDE-100, BDE-153, BDE-154, BDE-183, and BDE-209) were detected in these samples to clarify the pollution status in the metropolis. Instrumental analyses showed that the concentrations of ∑₈PBDEs ranged from 10.97 to 64.05 ng/g dry weight (dw), with an average value of 29.71 ng/g dw. BDE-209 was the predominant congener accounting for more than 97 % of total PBDEs, followed by BDE-47 and BDE-99. Remarkable spatial and seasonal distributions of PBDE concentrations were observed, suggesting that local sources, seasonal climates, and hydrologic conditions might be the influencing factors. Moderate correlations (r ²?=?0.28–0.51, p?<?0.05) were found between total organic carbon and PBDEs, which indicated that organic carbon content influenced the distributions of PBDEs in sediment of Shanghai at some extent. Hazard quotients revealed PBDEs posed no potential risk to benthic organisms in the study area at present.     

基于IHS和PCA的CBERS与TM数据融合研究

以安徽省淮北市主城区为主要研究区域,采用2000年9月14日TM图像和2007年4月8日中巴资源卫星(CBERS-02)CCD数据作为数据源,主城区TM图像大小为239×338,CBERS图像大小为367×519.对两期遥感图像进行图像配准和去噪处理,运用IHS变换法和PCA变换法对TM图像和CBERS全色波段图像进行融合,并对融合结果进行了评价.     

垃圾焚烧炉干法尾气净化处理系统的应用研究

介绍了目前国内垃圾处理情况和有关规定及垃圾焚烧炉干法尾气净化处理的原理、工艺流程及系统构成,并从工艺流程、工艺原理、运行和控制、维护保养、运行成本等方面对垃圾焚烧炉干法尾气净化处理系统和半干法尾气净化处理系统进行了比较.     

Levels of polychlorinated dibenzo-p-dioxins and dibenzofurans in China and chemometric analysis of potential emission sources

Aimed to give a preliminary image of dioxin pollution in China, chemometric analysis was performed to determine background dioxin levels during the period 1994-2002 and potential emission sources. Using principal components analysis (PCA), the congener profiles of 71 sediment samples from rivers, lakes, and sea bays around China were compared with the congener profiles of various known or suspected industrial, residential, and municipal dioxin sources to determine whether the dioxin residues typically found in a broad range of potential environmental sources could explain the presence of these chemicals in China. It was found that the background dioxin levels of China were similar to those of lightly polluted samples from other countries during the period 1994-2002. Primary ferrous ore sintering and secondary lead and aluminum smelters were the major sources of dioxin emission in China. Chloranil and wastewater from chemical plants, sodium pentachlorophenate, and pulp bleaching were also important sources of dioxin emission. Open burning of e-waste as well as diesel-fueled and leaded gas-fueled vehicles were additional possible sources of dioxin. In contrast to other countries, in China, flue gases from incineration of municipal waste, hazardous waste, and medical waste might be minor sources of dioxin emission.     

确定压力容器安全系数原则

压力容器安全系数与材料参数紧密相关,确定材料许用应力值时,需要同时考虑材料抗拉强度和屈服强度更为合理;奥氏体不锈钢材料具有非常好的应变强化能力和韧性,为充分发挥奥氏体不锈钢材料优良性能,选取奥氏体不锈钢材料许用应力值时,需要特殊考虑。压力容器安全系数的选取建立在经验基础上,在保障压力容器安全性前提条件下,为节省材料和降低成本,随着理论研究深入和科学实验的进步,压力容器安全系数有所降低,这是科学设计和实用成功经验结合的结果。     

煤矿安全生产中人的行为影响因子系统动力学(SD)仿真分析

在构建影响人的安全行为因素因果关系的基础上,运用系统动力学(SD)理论和方法,对影响人的安全行为关键因素进行动态预测,并通过仿真计算、对比分析安全投入增加对系统安全水平的影响。应用该方法建立的煤矿生产中人的安全行为指标水平模型,以求证安全投入与人的安全行为水平的相关性,为煤矿安全管理决策提供一种新的思路,亦有助于政府和煤矿企业科学地明确安全投入方向,降低人因事故率,提高煤矿生产的安全水平。     

废电路板热解特性及其动力学分析

分别应用热天平和管式炉反应器对废电路板的热解行为进行实验研究.通过热重分析法,考察了在氮气气氛下,不同升温速率(10 K/min、15 K/min、20 K/min、40 K/min)对废电路板热解特性的影响.结果表明,升温速率对废电路板热解失重曲线有较大影响,反应起始温度,失重率最大时的温度和反应结束温度均随升温速率的提高而相应增加.热解动力学研究表明,废电路板热解反应符合一级反应动力学,反应活化能和指前因子均随升温速率的增大而呈上升趋势,活化能在110～180 kJ/mol,指前因子在2.0×107～1.2×1013 min-1.此外,在管式炉反应器上,考察在同一升温速率(20 K/min)下不同热解终温(400 ℃、500 ℃、600 ℃、700 ℃、800 ℃)对废电路板热解产物产率和气体成分分布的影响.结果表明,当温度在600 ℃以上时,固体残渣的产率变化不大,升高温度只是改变油气比; 电路板热解气的主要成分是H2、CO、CO2、CH4、C2H4、C2H6、C3H6和C3H8,气体热值在11.24～15.21 MJ/m3,焦油热值在24.5～27.5 MJ/kg范围内.热解后所得固体残渣是易碎的,其中玻璃纤维部分呈层状分开,很容易对残渣中的金属和玻璃纤维部分进行分离.