An Atmospheric Diffusion Model for Metropolitan Areas

An urban diffusion model, which does not require the use of an electronic computer, is presented. The main simplifying assumptions are that continuous pollutant sources are uniformly distributed over the urban area and vertical diffusion occurs until the effluent from each line source reaches the top of the mixing layer, after which the effluent is uniformly distributed through the mixing layer. After the appropriate vertical diffusion coefficient is specified, the calculated concentration is a function of source strength, linear dimension of the metropolis, mixing depth, and wind speed. The calculated concentration is interpreted either as a representative maximum concentration or, through integration, as the average concentration over the metropolitan area. When a representative pollutant concentration is known, the model may be used to determine the apparent “uniform” source strength.     

Progress in High-Temperature Electrostatic Precipitation

Current-voltage relationships for negative corona are given for a pilot-scale electrostatic precipitator with 3-in. electrode spacing at 80°–1500°F and 35–80 psig. Direct comparison is made with the electrical characteristics for a 1-in. spacing at 1200°F over the same pressure range. Experimental results on both spacing agree well with electrostatic theory. Initial dust removal efficiencies for the pilot-scale precipitator ranged from 90 to 98% at 1460°F and 80 psig, but continuous operation was not achieved owing to excessive thermal expansion of the internal parts of the unit.     

A Multivariable Model for Atmospheric Dispersion Predictions

In conjunction with a 15-month air quality survey of Jacksonville, Fia., a mathematical model has been developed to describe the dispersion of atmospheric pollutants. The source inventory used with the model was compiled, in part, from the data obtained from the sampling of all major sources within the area. The major sources were considered separately from the one-mile square area sources which accounted for the remainder of the emissions. Meteorological data was recorded continuously in the city including vertical temperature observations to 750 ft. The model was compiled in FORTRAN and can be used for both gaseous and particulate pollutants, by utilizing proper decay rates. The variant nature of meteorological parameters and emission rates are considered. The ground level concentrations of several pollutants which were determined for 24 hr periods at 11 sites and continuously at two other sites were used to check the model. A limited tracer study was carried out in conjunction with the project.     

Apparent Photosynthesis as a Measure of Air Pollution Damage

A system has been developed to automatically measure the effects of air pollutants in the ambient air on the rate of CO₂ exchange by intact leaves of citrus trees growing in the field. A miniaturized system utilizing the same nondispersive infrared CO₂ analyzer has been designed to study individually the effects of different concentrations of air pollutants on photosynthesis and respiration by plants.     

Investigation to Determine the Possible Need for a Regulation on Organic Compound Emissions from Stationary Sources in the San Francisco Bay Area

The problem of an investigation of the need for a regulation on organic compound emissions in the San Francisco Bay Area can be divided into two major areas: 1. Is there a need for a regulation on organic compound emissions? What is the extent of photochemical smog effects? How much control is necessary to achieve the desired effects?

2. (2) If the need exists for an organic compound regulation, can a performance type regulation be written for all types of organic compound emissions? Must the regulation be directed toward specific industries or types of emissions? Can the regulation be adequately enforced—both practically and legally?

This paper will describe the studies undertaken by the District Staff to answer the first set of questions. Work covering the second group of questions is now under investigation.     

Ozone Dosage Response of Ponderosa Pine Seedlings

Photochemical oxidant injury to ponderosa pine (Pinus ponderosa Laws) is a severe problem in the southern California mountains. Three-year-old ponderosa pines fumigated in controlled environment chambers with ozone at 0.15, 0.30, or 0.45 ppm had apparent photosynthesis rates reduced by 10, 70, and 85%, respectively, after 30 days exposure. A fumigation with 0.30 ppm ozone for 33 days depressed the cold perchloric acid extracted polysaccharides of both current and one-year-old needles by 40%. The 80% ethanol soluble sugar concentration of current year, ozone-injured needles increased 16% and that of the one-year-old needles decreased slightly. Both carbohydrate fractions of control trees in carbon-filtered air increased moderately. Higher, endogenous concentrations of ascorbic acid in needles did not protect the tissue from ozone injury. Apparent photosynthesis rate was a sensitive index for ozone dosage response. Needle carbohydrate depletion probably induces premature abscission.     

enforcement of diesel smoke emissions for the state of new jersey

This paper reports on the research program undertaken by the State of New Jersey to determine those tests and instruments which can be used by authorized state agencies for the enforcement of diesel smoke emissions. The state agencies under consideration for the enforcement of diesel smoke emissions are the following: (1) The Division of Motor Vehicles, in its system of state owned inspection stations, will be able to inspect all diesel-powered trucks, and tractors which are registered in New Jersey. (2) The Public Utilities Commission will be able to inspect at their home garages all buses registered in the State. (3) The New Jersey State Police will be able to inspect diesel-powered vehicles on the road. It was decided that the maximum inspection time for each vehicle was not to exceed one minute. On the basis of the one minute per vehicle requirement, eight different tests were evaluated to determine which ones correlated well with normal vehicle operation. These tests included acceleration of a fixed external inertia, free acceleration of only the moving parts of the engine, three ramp tests, a test in which a heavy vehicle was towed, and a driving test in which the vehicle being tested was actually accelerated. The results of tests demonstrated that the modified free acceleration method correlates reasonably well with a loaded steady state cycle, distinguishes the high emitters and is simple to perform. Consequently, the free acceleration test method is recommended for use in inspection stations and on the road. Finally, nearly two hundred vehicles have been tested by this procedure to determine present and potential levels of diesel smoke emissions. Another phase of the program consisted of the determination of smoke measuring techniques and instrumentation. The use and design of smokemeters were extensively investigated, as well as the use of the visual and photographic techniques. Of the various smokemeters tested for this application, several measured smoke satisfactorily in the laboratory, but none were found adequate for field use; they either lacked portability or were unstable due to the deposition of soot on the optics. At the time of writing, specifications for the necessary smokemeter have been drafted and published for bid to interested manufacturers.     

The Number-Size Distribution of Atmospheric Particles During Temperature Inversions

Instruments capable of measuring in situ numbers of particles within specific size ranges covering a particle-diameter spectrum of approximately 0.001 – 10 microns have been employed to continuously monitor the concentration and size-distribution of atmospheric aerosols. The monitoring site was a television tower located on the boundary between Minneapolis and St. Paul, Minnesota. Air samples were drawn from 70, 170, and 500 feet above ground level and analyzed with optical, electrical, and condensation particle counters to obtain a number-size distribution within the 0.001 – 10 micron size range. In addition to the measurement of particle number and size, several micrometeorological parameters were simultaneously monitored. Particle number-size distributions which were measured during periods of temperature inversion are reported     

Ozone Injury to Pinus Strobus

In a study of the ozone-induced needle blight of eastern white pine in central New York, acute injuries naturally induced on field trees during a year of relatively low ozone concentrations (1 966) were compared with injuries induced during a year of higher concentrations (1967). Injuries were more frequent and severe and were associated with higher mean ozone concentrations in 1967 than in 1966. Characteristic symptoms were induced on foliage of pine branches exposed to controlled doses of ozone as low as 7 ± 1 pphm for four hours or 3 ± 1 pphm for 48 hours. Such doses were equalled or exceeded two and four times, respectively, in the field during the 1 967 season. Ozone sensitivity of pine needle tissue was increased by fumigation in atmospheres containing water mist. High concentrations of ozone (40-60 pphm) caused general injury of foliage of both ozone-susceptible and resistant trees; the symptoms were unlike those found in the field or caused by fumigation with low concentrations of ozone.     

Sulfur Dioxide Removal and Recovery from Pulp Mill Power Plants

The use of soda ash liquor to scrub SO₂ rich power plant flue gases was studied using an Airetron pilot scrubber with a maximum capacity of 3000 cfm. The relative effects of the major operating variables— temperature, soda ash concentration, and the gas/liquid flow ratio—on the absorption phenomenon were determined. Orthogonal factorial experiments were used to derive a response function relating mass transfer values to operating variables. The economics of a full scale NSSC installation are discussed.