Effect of varying two key parameters in simulating evacuation for subway stations in China

With the rapid development in economics, subway systems have been constructed in many big cities of China. Computer evacuation models developed overseas are commonly applied in working out safety management scheme. However, input evacuation parameters are not compiled from surveying passenger behavior in China. In fact, very few studies were conducted on justifying such parameters. Staircases in subway stations, particularly those connecting the platform and the ticket hall, are identified as the ‘bottleneck’ during evacuation in the subway stations. The maximum upstairs speed and the average minimum width of staircase utilized per person are the two key parameters affecting the evacuation through the staircase. Effect of varying these two parameters will be studied in this paper by taking two subway stations in China as examples. Evacuation performance is predicted with the software buildingEXODUS. The default values in the software are used and adjusted through field survey. Effect of varying either or both of the two parameters is discussed. The possible causes on the differences and the factors to affect such effect are explored. It is found that changing both parameters simultaneously would reduce the overall evacuation time by 50%. The effect of varying the two parameters on the overall evacuation performance of the whole station depends also on the occupancy density in the station; and the travel distance from the outlet of the staircase between the platform and the ticket hall to the inlet of the staircase between the ticket hall and the ground surface.     

Controlled readability of Seveso II company safety documents,the design of a new KPI

Companies often use a substantial quantity of safety-related documents such as the front gate safety flyer, emergency evacuation instructions, work permits, safety procedures, work instructions and policy statements. In many cases the personnel magazines and message board notes also contain safety information. The authors and readers may not be in the same department, premises or cultural group. Both authors and readers are diverse groups when it comes to reading, writing and language skills. Previous research has found that Seveso II companies produce documents that are difficult for their workforce and visitors to understand. Authors do not write systematically to match the reader’s skill level. This may be due in part to the quality and effectiveness of layout guidance, expert linguistic advice and document appraisal systems. These do not in general provide the immediate support needed. Layout suggestions are of limited effectiveness, and availability and usability limits the value of expert advice and appraisal systems. So, without useful feedback, many authors cannot write sufficiently readable documents; to overcome this threshold, they need a quick document readability assessment tool. With such a tool, readability can become a controlled property of safety documents. Large companies may use hundreds or thousands of documents containing safety information. This paper presents a practical approach for the transition to, and monitoring of, controlled readability for all documents related to safety. A new Key Performance Indicator design on readability is proposed.     

Common operations failure modes in the process industries

The Abnormal Situation Management^® (ASM^®) Consortium (This research study was sponsored by the Abnormal Situation Management (ASM) Consortium. ASM^® and Abnormal Situation Management^® are registered trademarks of Honeywell International, Inc.) funded a study to investigate common failure modes and root causes associated with operations practices. The study team analyzed 20 public and 12 private incident reports using the TapRoot^® methodology to identify root causes. These root causes were mapped to operations practice failures. This paper describes the top ten operations failure modes identified in the analysis. Specific recommendations include how to analyze plant incident reports to better understand the sources of systemic failures and improve plant operating practices.     

Leading and lagging: Process safety climate–incident relationships at one year

In order to evaluate the leading and lagging effects of process safety climate on incidents, we correlated safety climate survey data with organizational safety records from before and after the survey time period. We obtained data from a large, multinational organization with manufacturing operations involving a number of complex processes, chemicals, and hazardous substances. A total of 7728 employees from 62 sites responded to a safety climate survey in 2007. Individual responses were aggregated to the site-level and matched to site-level organizational records of process safety incidents 1 year before and 1 year after survey administration. Employees’ perceptions of good routine housekeeping were significantly related to environmental impact incidents as both a leading and a lagging indicator, as well as fires/explosions and property damage outcomes. Employees’ perceptions of systems to prevent backlogs and the extent to which health and safety problems are promptly corrected were also related to environmental releases and fires/explosions. Implications for process safety climate research, organizational survey strategies, and organizational climate change are discussed.     

浅析加油站施工现场HSE管理

随着全球经济一体化的加速发展以及信息技术的革命,HSE管理体系已成为世界性的潮流与主题。尤其在我国加入WTO之后,石油化工行业在面临国内市场严峻挑战的同时,还将面临国际市场更加剧烈的冲击。     

Characterization of heavy metals in fly ash from municipal solid waste incinerators in Shanghai

This study aims to develop a methodology for analysis of characteristics of heavy metals in MSWI fly ash. It performed analysis of composition of heavy metals, leaching toxicity, leaching behavior as a function of pH, specification distribution and corresponding mineral components of residue derived from each step of the sequential extraction. It is found that content of heavy metals follows the sequence of Zn > Pb > Cu > Cr > As > Ni > Cd approximately Hg in both plants, and that total heavy metals account for less than 1% by mass of fly ash. Major hazardous heavy metals in fly ash are As, Cd, Hg, Pb and Zn, whose leaching ratios exceed the limit value described in hazardous waste identification standard. Measured leaching results of Cu, Pb and Zn are essentially consistent with the simulated results at pH between 0 and 13. Content of calcium-silicates, alumino-silicates and glass phases in residue derived from sequential extraction procedure increases steadily from the first step to the fifth step of the sequential extraction procedure. Cu, As, Cr, Hg, Cd, and Ni, relatively stable under strong basic conditions, can be leached out under strong acidic conditions, while Zn and Pb tend to be leached out under both strong acidic and basic conditions.     

Oxidation of kerosene components in a soil matrix by a dielectric barrier discharge reactor

This paper discusses some aspects of the kerosene components oxidation in a soil matrix by a dielectric barrier discharge reactor at atmospheric pressure. The total kerosene components abatement can reaches 90% for an energy density of 960 J g_soil^?1. The analyses of the discharge cell outlet gas reveals that CO_x and hydrocarbon compounds selectivity is close to 10%. A semi-quantitative approach by GC-FID shows that the carbon content in the oxidized compounds in soil is about 20% of the carbon content in the initial kerosene components. The polar species formed in soil are a mixture of aliphatic and aromatic molecules containing alcohol and carboxylic acid groups. The process of kerosene oxidation in soil matrix is more promoted than kerosene desorption followed by an oxidation in gas phase.     

东胜区水环境保护及污水资源化分析

本文介绍了东胜区水资源及水环境概况,在实地调研并以环境技术检测数据为依据分析了该区水环境存在的问题;结合城区经济发展和资源现状,提出该城区实现污水资源化的观点并论证了其现实性和可行性;提出了东胜区推进污水资源化,保障水资源可持续利用的政策措施.     

Climatic and genetic controls of yields of switchgrass, a model bioenergy species

The U.S. Renewable Fuel Standard calls for 136 billion liters of renewable fuels production by 2022. Switchgrass (Panicum virgatum L.) has emerged as a leading candidate to be developed as a bioenergy feedstock. To reach biofuel production goals in a sustainable manner, more information is needed to characterize potential production rates of switchgrass. We used switchgrass yield data and general additive models (GAMs) to model lowland and upland switchgrass yield as nonlinear functions of climate and environmental variables. We used the GAMs and a 39-year climate dataset to assess the spatio-temporal variability in switchgrass yield due to climate variables alone. Variables associated with fertilizer application, genetics, precipitation, and management practices were the most important for explaining variability in switchgrass yield. The relationship of switchgrass yield with climate variables was different for upland than lowland cultivars. The spatio-temporal analysis showed that considerable variability in switchgrass yields can occur due to climate variables alone. The highest switchgrass yields with the lowest variability occurred primarily in the Corn Belt region, suggesting that prime cropland regions are the best suited for a constant and high switchgrass biomass yield. Given that much lignocellulosic feedstock production will likely occur in regions with less suitable climates for agriculture, interannual variability in yields should be expected and incorporated into operational planning.     

配碳还原回收铜渣中铁、铜的影响因素探讨

采用配碳还原和熔融造渣方法回收铜渣中铁和铜,研究了CaO、Al2O3、CaF2、Na2CO3成分对铁和铜回收效果的影响。在碳氧比1.5和1 450℃条件下,CaO加入量约30%时,铁和铜的回收率较高,分别是93.85%和92.73%。实验表明:添加Al2O3、Na2CO3均降低铁和铜的回收效果,使渣中含铁量增加;CaF2添加量小于2%时,有利于铜渣中铁的回收,CaF2添加量较大时不利于铁和铜的回收。