Bio-drying and size sorting of municipal solid waste with high water content for improving energy recovery

Bio-drying can enhance the sortability and heating value of municipal solid waste (MSW), consequently improving energy recovery. Bio-drying followed by size sorting was adopted for MSW with high water content to improve its combustibility and reduce potential environmental pollution during the follow-up incineration. The effects of bio-drying and waste particle size on heating values, acid gas and heavy metal emission potential were investigated. The results show that, the water content of MSW decreased from 73.0% to 48.3% after bio-drying, whereas its lower heating value (LHV) increased by 157%. The heavy metal concentrations increased by around 60% due to the loss of dry materials mainly resulting from biodegradation of food residues. The bio-dried waste fractions with particle size higher than 45 mm were mainly composed of plastics and papers, and were preferable for the production of refuse derived fuel (RDF) in view of higher LHV as well as lower heavy metal concentration and emission. However, due to the higher chlorine content and HCl emission potential, attention should be paid to acid gas and dioxin pollution control. Although LHVs of the waste fractions with size <45 mm increased by around 2× after bio-drying, they were still below the quality standards for RDF and much higher heavy metal pollution potential was observed. Different incineration strategies could be adopted for different particle size fractions of MSW, regarding to their combustibility and pollution property.     

Biodegradable microplastics (BMPs): a new cause for concern?

Environmental Science and Pollution Research - With the increasingly serious pollution of plastics, biodegradable plastics (BDPs) have attracted attention as a new material that can replace...     

A review on fabricating functional materials by heavy metal–containing sludges

Environmental Science and Pollution Research - With the development of industry, sustainable use of natural resources has become a worldwide hot topic. Heavy metal–containing sludge (HMS) is...     

Sugarcane monoculture drives microbial community composition,activity and abundance of agricultural-related microorganisms

Environmental Science and Pollution Research - Sugarcane monoculture (SM) often leads to soil problems, like soil acidification, degradation, and soil-borne diseases, which ultimately pose a...     

活性污泥中硝化螺菌(Nitrospira)的富集及其动力学参数

采用连续进水的进水方式对污水处理厂活性污泥系统中的Nitrospira富集培养并对其相关动力学参数进行研究.结果表明,在控制反应器亚硝酸盐浓度不高于2 mg·L~(-1)的条件下可以成功富集出以Nitrospira为优势种属的活性污泥,其最大比亚硝酸盐氧化速率(以N/VSS计)为48.72 mg·(g·h)~(-1).荧光原位杂交结果显示Nitrospira占活性污泥总微生物量的75%左右,而Nitrobacter仅占总微生物的0.1%.此外通过对Nitrospira在20℃时的动力学参数进行测定,结果表明Nitrospira的最适生长温度为30~35℃,温度修正系数τN为1.046,其基质半饱和常数KS和氧半饱和常数KO分别为(0.32±0.03)mg·L~(-1)和(1.52±0.09)mg·L~(-1).Nitrospira动力学参数的研究为污水处理厂的设计运行及工艺优化提供理论参考.     

Metal distribution characteristic of MSWI bottom ash in view of metal recovery

Bottom ash is the major by-product of municipal solid waste incineration(MSWI), and is often reused as an engineering material, such as road-base aggregate. However, some metals(especially aluminum) in bottom ash can react with water and generate gas that could cause expansion and failure of products containing the ash; these metals must be removed before the ash is utilized. The size distribution and the chemical speciation of metals in the bottom ash from two Chinese MSWI plants were examined in this study, and the recovery potential of metals from the ash was evaluated. The metal concentrations in these bottom ashes were lower than that generated in other developed countries. Specifically, the contents of Al,Fe, Cu and Zn were 18.9–29.2, 25.5–32.3, 0.7–1.0 and 1.6–2.5 g/kg, respectively. Moreover,44.9–57.0 wt.% of Al and 55.6–75.4 wt.% of Fe were distributed in bottom ash particles smaller than 5 mm. Similarly, 46.6–79.7 wt.% of Cu and 42.9–74.2 wt.% of Zn were concentrated in particles smaller than 3 mm. The Fe in the bottom ash mainly existed as hematite, and its chemical speciation was considered to limit the recovery efficiency of magnetic separation.     

大冶湖表层水和沉积物中重金属污染特征与风险评价

于2014年4月采集大冶湖表层水和表层沉积物,用原子吸收分光光度法测定其重金属含量,并基于健康风险评价模型和潜在生态风险指数法开展表层水和沉积物重金属污染的潜在健康风险和生态风险评价.结果表明,表层水和沉积物重金属(Ni、Cd、Cu和Pb)含量平均值分别为49.27、2.19、12.18、12.13μg·L~(-1)和78.46、77.13、650.13、134.22 mg·kg~(-1).富集系数显示,Cd、Cu和Pb均为重度富集,尤其是Cd累积最为明显.与国内典型湖泊重金属污染相比,表层水和沉积物中重金属元素含量均相对较高.表层水和沉积物重金属元素均表现为湖湾处含量较高,中部含量较均匀的分布规律,其来源主要受多种人为活动污染.环境风险评价显示,重金属类化学物质通过饮水途径产生健康风险范围为9.77E-08~1.63E-05 a-1,Ni和Cd是水环境健康风险的优先管理对象.沉积物重金属的潜在生态风险高低为CdCuPbNi,其中Cd是生态风险的贡献元素.     

京津冀区域燃煤发电行业大气污染物排放时空变化特征研究

为了科学评估京津冀区域燃煤发电行业特别排放限值和超低排放相关要求实施后的大气污染物减排效果,以行业调查数据为基础,建立了2013年和2015年京津冀区域燃煤发电行业大气污染物排放清单,分析了装机容量与SO_2、NO_x和烟尘排放量的时空耦合关系,讨论了国家相关政策和标准的实施效果。结果显示:区域内2015年燃煤机组装机容量与2013年相比略有下降,SO_2、NO_x和烟尘排放量分别下降75.95%、83.09%和71.20%,减排效果明显。2015年100 MW以下等级机组3种污染物排放总量位居各机组首位,建议通过多种合理方式压减小型燃煤发电机组数量和排放浓度。     

β射线法与重量法监测环境空气PM_(2.5)的应用比较

重量法是测量PM_(2.5)的传统手工经典方法,而β射线法加动态加热系统联用光散射法作为自动在线监测技术的常用方法被广泛使用。将5030-SHARP型β射线法加动态加热系统联用光散射法PM_(2.5)自动监测设备监测结果与手工法测量结果进行比对、分析,结果表明:β射线法与重量法监测结果具有一致性,测量结果不存在显著性差异;β射线法与重量法相对偏差值与温度、相对湿度、风速等气象因子的相关性不明显;β射线法与重量法监测结果的差异性与PM_(2.5)质量浓度、季节等条件有关;随着PM_(2.5)质量浓度逐渐升高,β射线法与重量法相对偏差的绝对值|RD|也随之增大,不同季节的|RD|平均值差异较大,春季、冬季的|RD|平均值大于夏季、秋季。     

城市饮用水源地生态系统健康评价与保护对策研究

开展城市饮用水源地生态系统健康状况评价,为建立流域尺度的长效保护机制提供依据.以郑州尖岗水库为研究对象,构建水域生境结构、水生生物、陆域生态格局和生态功能等共6类16项评价指标,采用综合指数法开展评估.尖岗水库水域、陆域和流域综合生态健康标准化评估值分别为54.17、59.21和57.19,评价等级均为"一般",河道连通性、森林覆盖率是流域生态健康的主要限制因子.人类活动对尖岗水库生态系统健康状况产生了强烈影响,生态环境正处于负向演替和生态退化阶段.