The modelling of trichloroethene photodegradation in Brij 35 surfactant by two-stage reaction.

Various clean-up technologies have been developed for the removal and/or destruction of trichloroethene (TCE) in the subsurface. Surfactant-aided soil washing followed by photodegradation could be a promising approach to such a task. The modelling of TCE photodegradation by UV in Brij 35 surfactant micelles is therefore investigated. Two stages of TCE degradation are observed in surfactant Brij 35 systems. A lag phase is observed at the commencement of the degradation, but the duration of the lag phase is significantly reduced as the initial pH increases. As the overall decay of TCE is also found to be faster at higher pH levels, it is suggested that the free radical reaction is dominant at high pH levels, and the formation of lag phases is mainly due to the deficiency of free radicals at lower pH levels. Since the period of the lag phase gradually decreases with the increase of initial pH level, and the two pseudo first-order reaction constants (one for the lag phase and one for the subsequent fast decay) for TCE decay in both stages are also pH dependent, a non-steady-state mathematical model is developed for the prediction of TCE photodegradation in Brij 35 solutions, in which the remaining fraction of TCE (C/C0) in the system can be determined at any instant by using a simple parameter of the initial system pH.     

Degradation of 14C-carbofuran in soil using a continuous flow system

14C-carbofuran underwent considerable mineralization (approximately 30% of the applied activity) in Vertisol soil under moist and flooded conditions during 60 days incubation. Bound residues were formed under both the conditions, the extent being more in moist soils (approximately 55% of the applied activity) than under flooded conditions (approximately 41% of the applied activity). 3-Keto carbofuran was the only significant metabolite observed under flooded conditions.     

The acute toxicity of agricultural surfactants to the tadpoles of four Australian and two exotic frogs

Nonionic surfactants are frequently incorporated into pesticide formulations, and are therefore a group of chemicals to which amphibians may be exposed in agricultural or urban landscapes. However, little is known about the effects of surfactant exposure in amphibians. Feeding stage tadpoles of Bufo marinus, Xenopus laevis and four species of Australian frogs (Crinia insignifera, Heleioporus eyrei, Limnodynastes dorsalis and Litoria moorei) were exposed to nonylphenol ethoxylate (NPE) and alcohol alkoxylate in static-renewal acute toxicity tests. All species exhibited nonspecific narcosis following exposure to both these surfactants. The 48-h EC50 values for NPE ranged between 1.1 mg/l (mild narcosis) and 12.1 mg/l (full narcosis). The 48-h EC50 values for alcohol alkoxylate ranged between 5.3 mg/l (mild narcosis) and 25.4 mg/l (full narcosis). Replicate acute toxicity tests with B. narinus exposed to NPE at 30 degrees C over 96 h indicated that the narcotic effects were not particularly time dependant. The mean 24, 48, 72, and 96-h EC50 (mild narcosis) values were 3.6, 3.7, 3.5 and 3.5 mg/l, respectively. The mean 24, 48, 72 and 96-h EC50 (full narcosis) were 4.0, 4.1, 4.2 and 4.0, respectively. Acute toxicity tests with B. marinus exposed to NPE at 30 degrees C under conditions of low dissolved oxygen (0.8-2.3 mg/l) produced a two to threefold increase in toxicity.     

Formation of PCDDs and PCDFs during the combustion of polyvinylidene chloride

In laboratory-scale combustion of polyvinylidene chloride (PVDC) with a quartz tubular furnace designed and fabricated to provide the desired combustion temperature and mixing state of combustion gas with air, it was found that at 800 degrees C or higher the level of polychlorinated dibenzo-p-dioxins/polychlorinated dibenzofurans [corrected] (PCDDs/PCDFs) resulting from PVDC combustion was no higher than that from heating air alone, and thus far below the levels which resulted from PVDC combustion at 750 degrees C or lower. The results provide the first laboratory confirmation of the relation between PVDC incineration temperature and PCDD/PCDF formation, and of the primary importance of high temperature, turbulence for mixing between air and combustion gas, and sufficient residence time, as governing factors for the minimization of PCDD/PCDF formation in municipal solid waste incinerators.     

The organic precursors affecting the formation of disinfection by-products with chlorine dioxide

The object of this research was to study the formation of disinfection by-products by using chlorine dioxide (ClO2) as a disinfectant reacting with different properties of organic substance in natural aquatic environment. The adsorbent resin (XAD-4, XAD-7) was used to divide the organic matters in raw water into three groups. The influence of the function groups on structure, reaction tendency, and formation of disinfection by-products generated by the reaction of these organic substances with chlorine dioxide was explored. The experimental results show that the three different organic groups formed using adsorbent resin were hydrophobic substance, hydrophilic acid, and non-acid hydrophilics in proportions of 43%, 41%, and 16%, respectively. Within the raw water in our study, the hydrophilic substance had a higher distribution proportion than that described in general articles and journals, which indicates that this water was contaminated with pollution from human beings. The exploration of the reactivity of the three different organic substances with chlorine dioxide shows that the unit consumption of disinfection agent per unit organic matters (represented by ClO2/DOC) is in the following sequence hydrophobic substance > hydrophilic substance > non-acid hydrophilics. It indicated that larger molecular organic precursors had larger consumption of disinfectant. We also discovered that after the reaction of the three different organic substances with chlorine dioxide, the largest amount of disinfection by-products were generated by the non-acid hydrophilics.     

The rate improvement and modeling of trichloroethene photodegradation by acetone sensitizer in surfactant solution

The photodecay of trichloroethene (TCE) in surfactant solution by the help of photosensitizer (acetone, ACE) was investigated and modeled. Apart from the direct photodegradation, photosensitization is presumed to be one of the major mechanisms contributing to overall decay. Quantum yields of TCE photodecay in solution with surfactant Brij 35 and optimal ACE dosage are about 25 times higher than in Brij 35 alone. However, with an excess ACE dosage, ACE will act as a light barrier and attenuate the light intensity available for TCE photodegradation. TCE photodegradation follows a two-stage kinetics, in which a lag phase is followed by a fast decay. Mathematical models were developed for the prediction of the two-stage photodegradation, in which the remaining fraction of TCE (C/C0) in the system becomes predictable.     

Attempt to adsorb N-nitrosamines in solution by use of zeolites

The strong adsorption of zeolite for N-nitrosamines in solution was first revealed by use of adsorption, and temperature programmed surface reaction (TPSR) techniques. N-nitrosodimethylamine (NDMA) and N-nitrosopyrrolidine (NPYR) as well as N-nitrosohexamethyleneimine (NHMI) can be adsorbed on zeolite Y, ZSM-5 and A in the solution of methylene chloride or water, which will be helpful for removal of the N-nitrosamines pollution in environmental protection. The equilibrium data were fitted to Freundlich-type isotherms, but the adsorption capacity of zeolites mainly depended on their pore size, surface area and acid-basic properties. Molecular size of adsorbate and solute-solvent interaction also strongly affected the adsorption of N-nitrosamines on zeolite in solution. The extraordinary adsorption properties of NaA zeolite for N-nitrosamines in aqueous solution is first reported and discussed.     

Biodegradation during contaminant transport in porous media: 4. Impact of microbial lag and bacterial cell growth

Miscible-displacement experiments were conducted to examine the impact of microbial lag and bacterial cell growth on the transport of salicylate, a model hydrocarbon compound. The impacts of these processes were examined separately, as well as jointly, to determine their relative effects on biodegradation dynamics. For each experiment, a column was packed with porous medium that was first inoculated with bacteria that contained the NAH plasmid encoding genes for the degradation of naphthalene and salicylate, and then subjected to a step input of salicylate solution. The transport behavior of salicylate was non-steady for all cases examined, and was clearly influenced by a delay (lag) in the onset of biodegradation. This microbial lag, which was consistent with the results of batch experiments, is attributed to the induction and synthesis of the enzymes required for biodegradation of salicylate. The effect of microbial lag on salicylate transport was eliminated by exposing the column to two successive pulses of salicylate, thereby allowing the cells to acclimate to the carbon source during the first pulse. Elimination of microbial lag effects allowed the impact of bacterial growth on salicylate transport to be quantified, which was accomplished by determining a cell mass balance. Conversely, the impact of microbial lag was further investigated by performing a similar double-pulse experiment under no-growth conditions. Significant cell elution was observed and quantified for all conditions/systems. The results of these experiments allowed us to differentiate the effects associated with microbial lag and growth, two coupled processes whose impacts on the biodegradation and transport of contaminants can be difficult to distinguish.     

The Henry's law coefficient of 2-nitrophenol over the temperature range 278-303 K

Although 2-nitrophenol has been identified as an important environmental chemical there is scarcity in the literature regarding the temperature dependence of its Henry's law coefficient, H. Here a bubble purge method was used to measure H for 2-nitrophenol over the temperature range 278-303 K. A novel approach in the data treatment allowed correction of the data for non-equilibrium partitioning in the apparatus to obtain the true equilibrium H value. The experimentally derived temperature-dependent expression for H of 2-nitrophenol is lnH (M atm(-1)) = (6290/T (K)) - 16.6. The standard enthalpy and entropy of gas-to-liquid transfer for 2-nitrophenol in aqueous solution are -52.3 +/- 8.1 kJ mol(-1) and -138 +/- 28 J mol(-1) K(-1), respectively. (Errors are 95% confidence intervals.)     

Daily trend of dissolved gaseous mercury concentration in coastal seawater of the Mediterranean basin.

A daily trend of DGM concentration in shallow coastal seawater has been measured in an area of the Mediterranean basin. Values up to 47 pg/l were determined for a photosynthetically active radiation (PAR) intensity of 350 W/m2. The lowest value (18 pg/l) has been observed before sunrise. A linear relationship between the PAR intensity and DGM production has been highlighted in an experiment on seawater samples exposed for 10 min to solar radiation. The processes involved in DGM production and losses are discussed.