Capability of cation exchange technology to remove proven N-nitrosodimethylamine precursors

N-nitrosodimethylamine(NDMA) precursors consist of a positively charged dimethylamine group and a non-polar moiety, which inspired us to develop a targeted cation exchange technology to remove NDMA precursors. In this study, we tested the removal of two representative NDMA precursors, dimethylamine(DMA) and ranitidine(RNTD), by strong acidic cation exchange resin. The results showed that pH greatly affected the exchange efficiency, with high removal(DMA 78% and RNTD 94%) observed at pH pk_a-1 when the molar ratio of exchange capacity to precursor was 4. The exchange order was obtained as follows: Ca~(2+) Mg~(2+) RNTD~+ K~+ DMA~+ NH_4~+ Na~+. The partition coefficient of DMA~+to Na~+was 1.41 ± 0.26, while that of RNTD~+to Na~+was 12.1 ± 1.9. The pseudo second-order equation fitted the cation exchange kinetics well. Bivalent inorganic cations such as Ca~(2+)were found to have a notable effect on NA precursor removal in softening column test. Besides DMA and RNTD, cation exchange process also worked well for removing other 7 model NDMA precursors. Overall, NDMA precursor removal can be an added benefit of making use of cation exchange water softening processes.     

中国村镇生活垃圾的养分与重金属含量特征及其农用潜力分析

对全国12个省份72个典型村镇进行了生活垃圾采样调查,系统分析了我国农村生活垃圾的基本理化特性、养分含量与重金属特征及其农用潜力。研究表明:我国典型村镇生活垃圾含水率为(53.68±8.84)%,p H为7.11±0.56,有机质含量为(49.04±10.49)%,C/N约为43∶1,C/P约为144∶1。除C/N略高外,其余特性均适合进行堆肥化处置。我国典型村镇生活垃圾中重金属As、Hg、Pb、Cd、Cr,Cu和Zn含量分别为(7.645±8.729),(0.737±0.480),(21.798±17.606),(3.356±11.012),(108.632±84.011),(36.834±10.905),(80.093±42.237)mg/kg。与国内相关标准相比,只有Hg、Cd超标,最大超标率分别为29.17%、43.75%;与欧美相关标准相比,仅有Cd、Cr超标,最大超标率分别为25.69%、37.50%。     

多相流中细长颗粒数值模拟研究综述

纤维干燥尾气中的飞灰含有大量的木质纤维、砂光粉和其他粉尘。从形状来看,木质纤维属细长颗粒,和研究较为成熟的球形颗粒在许多方面存在较多差异。目前,国内外学者们已对细长颗粒在多相流中的悬浮、沉降及流化方面开展了大量数值模拟研究,取得了一定的进展;在此基础上,继续完善木质纤维的运动特征、推导出其在换热器表面的碰撞沉积模型是下一步的主要工作。     

利用餐厨垃圾湿热处理脱出液制备液态菌肥研究

以餐厨垃圾湿热处理脱出液为发酵培养基,选用圆褐固氮菌(Azotobacter chroococcum)作为实验菌种制作固氮液态菌肥。测定了圆褐固氮菌的主要生理特性,将其接种于餐厨湿热处理脱出液中进行培养,确定最佳发酵时间,并分别测定发酵的最佳初始p H值、接种量、培养温度、摇床转速、装液量、脱出液与水的混合比例。结果表明:圆褐固氮菌在餐厨湿热处理脱出液中最佳发酵时间为36 h,发酵最佳初始p H值、接种量、培养温度、摇床转速、装液量、脱出液与水的混合比例依次为7.5、1%、30℃、150 r/min、50 m L(250 m L锥形瓶)、1∶1。圆褐固氮菌在餐厨垃圾湿热处理脱出液中进行培养后,可达到液态菌肥的活菌数标准。     

环境保护系统参与空间规划的思考与建议

空间规划体系下,环境规划在空间落地性以及精细化程度上存在短板。建议环境规划进一步完善生态保护红线制度,探索环境质量底线、环保负面清单的划定技术思路与技术路线,推动环境保护系统化参与空间规划。     

Increasing the application of gas engines to decrease China’s GHG emissions

This paper employs a review of the technical literature to estimate the potential decrease in greenhouse gas (GHG) emissions that could be achieved by increasing the application of gas engines in China in three sectors: urban public transport vehicle; shipping; and thermal power plants. China’s gas engine development strategies and three types of gas resource are discussed in the study, which indicates that gas engines could decrease GHG emissions by 520 megatonnes (Mt) of carbon dioxide equivalent (CO_2e) by 2020. This would account for 9.7 % of the government’s target for decreasing GHG emissions and is dominated by methane recovery from the use of coal mine gas (CMG) and landfill gas (LFG) for power generation. In the public urban transport vehicle and shipping sectors the low price of natural gas and the increasing demand for the control of harmful emissions could spur the rapid uptake of gas engine vehicles. However, the development of CMG- and LFG-fuelled power plants has been limited by the unwillingness of local enterprises to invest in high-performance gas engine generators and the associated infrastructure. Therefore, further compulsory policies that promote CMG use and LFG recovery should be implemented. Moreover, strict regulations on limiting methane leakage during the production and distribution of gas fuels are urgently needed in China to prevent leakage causing GHG emissions and largely negating the climate benefits of fuel substitution. Strategies for increasing the application of gas engines, promoting gas resources and recovering methane in China are instrumental in global GHG mitigation strategies.     

汽油火灾专用泡沫灭火剂的制备及灭火性能的试验研究

为有效预防和控制汽油火灾的发生,以阴离子表面活性剂、阳离子表面活性剂和非离子表面活性剂的复配混合物为原料,制备一种高效、环保的汽油火灾专用泡沫灭火剂,采用恒温水浴的方法确定了该新型泡沫灭火剂的适宜配比和用量,并通过设计试验对该新型泡沫灭火剂的灭火性能和灭火效果进行了测试与检验。结果表明:该新型泡沫灭火剂的流变性能可满足消防需要,且热化学性能和灭火性能良好,其中配方含量为3%时灭火效果最佳。     

石化行业有机液体储罐VOCs损耗估算方法浅析

总结了实测法、公式法、模型法等国内外石化行业有机液体储罐VOCs排放估算方法的主要特点和适用范围;运用公式法估算国内某石化企业典型油品储罐的VOCs排放量;分析了在我国直接套用美国环保署(EPA)开发的TANKS模型存在的问题;根据估算方法的实际应用研究,就美国AP-42源强手册第五版第七章(chapter 7:Liquid storage tank)中评价公式的"本土化"提出相关的建议。     

聚四氟乙烯生产过程重大风险研究

基于现场调查对聚四氟乙烯生产的风险进行分析,通过危险度评价得出主要生产设备的危险度;应用道化学火灾爆炸危险指数方法对具有重大风险的聚合釜和进料罐进行分析,分别得出采取安全措施前后的火灾爆炸危险指数。研究表明,聚合釜和进料罐的固有火灾爆炸危险分别为"非常大"和"很大",进行安全措施补偿之后火灾爆炸危险均降至可接受水平。针对重大风险提出的建议对促进聚四氟乙烯的安全生产具有参考价值。     

高层建筑物火灾危险性分析方法的选择与应用

从方法的类别、评价目标、特点、优缺点以及适用范围等几个方面对目前采用较多的各种火灾危险性分析方法进行比较,总结归纳出每种分析方法的优缺点及其适用范围,并根据高层建筑物火灾的特性以及火灾危险性分析方法的选取原则,选用定量计算与定性分析相结合的方法对高层建筑物火灾危险性进行分析。首先利用层次分析法对高层建筑物火灾危险性所有评价指标的权重进行计算,得到权重值相对较高的评价指标,分别是火灾荷载、防火分区、安全管理制度、火灾自动报警系统、安全制度落实情况;然后利用预先危险性分析方法,从危险有害因素、事故触发条件、事故可能造成的后果、危险等级、事故预防措施这几个方面对以上权重值较高的评价指标进行详细分析。