九龙江口滨海湿地生源要素空间分布特征

为了揭示亚热带典型滨海湿地生源要素的空间分布特征及影响因素,选取九龙江口滨海湿地为研究对象,于2009年夏采集表层沉积物及柱状样,利用元素分析仪和流动注射分析仪对主要生源要素碳、氮、磷、硫(C、N、P、S)进行分析.结果表明,九龙江口滨海湿地生源要素含量较高,总碳、总氮、总磷、总硫(TC、TN、TP、TS)的均值分别为(12.64±2.66)、(1.57±0.29)、(0.48±0.06)、(2.61±1.37)g·kg-1,空间分布差异性显著.红树林植被区表层沉积物的TC、TN、TP含量高于米草植被及光滩,高潮位TC、TN、TP含量>中潮位>低潮位,TS在米草植被及中潮位含量较高.柱状样的TC、TN具有相似的垂直变化趋势,均表现为由表层向下逐渐降低,且不同植被间的柱状样TC、TN含量在同一深度上都表现为:红树区>米草区>光滩区;柱状样TP平均值是光滩最低,TS平均值是光滩最高.冗余分析表明,植被类型、pH及潮位是影响表层沉积物生源要素(C、N、P、S)分布最显著的环境因子,解释量分别为24.0%、19.0%和11.6%.     

多层填料生物转鼓去除NO废气的效能比较研究

生物转鼓过滤器能有效去除一氧化氮(NO)废气,为进一步提高生物转鼓过滤器的去除效能,实验改变了生物转鼓的填料结构,并与单层填料的生物转鼓进行了比较研究.结果表明,多层填料生物转鼓比单层填料生物转鼓更能有效去除NO,运行也更加稳定.8个月的连续运行实验表明,多层填料生物转鼓对NO去除率稳定在53.9％ ～93.4％之间,平均去除效率79.8％,而单层填料生物转鼓的平均去除率仅有68.7％;在相同实验条件下,空床停留时间(EBRT)可从单层填料生物转鼓的86.4 s降至多层填料生物转鼓的57.6 s.多层填料生物转鼓的最优工艺条件为,营养液量为1.3～3L,转速为0.75 r·min-1,在以葡萄糖为碳源时,TOC＞ 1250 mg·L-1后,去除效率增长幅度趋于平缓.     

挥发性有机污染物排放控制标准制订中的关键技术问题研究

研究分析了挥发性有机污染物排放标准制订中4个关键技术问题:污染因子选择、控制指标确定、限值的确定以及技术管理措施.结果表明,应根据毒性和光化学反应性选择污染因子;确定控制指标应既考虑有组织控制指标,又考虑无组织的控制指标;确定排放限值应明确是基于控制技术还是基于健康风险;同时制定技术管理措施以通过源头和过程控制挥发性有机污染物排放.     

La3+掺杂对吸附相反应制备TiO2复合催化剂的结晶过程及弱紫外光下活性的影响

利用吸附相反应技术制备弱紫外光响应的高效催化剂,并通过XRD、XPS以及HRTEM探索了不同焙烧温度下La3+掺杂量对TiO2结晶过程的影响.结合弱紫外光下甲基橙的降解反应,深入研究催化剂结晶过程的变化对弱紫外光下催化剂活性的影响.结果表明,La3+掺杂会抑制TiO2的结晶过程.当焙烧温度或者掺杂量较低时,La3+不能进入TiO2的晶格结构但会轻微地抑制TiO2的结晶过程;未进入晶格结构的La3+存在会引入光生载流子的浅能级捕获中心,在弱光体系中极大提升了催化剂的活性.当La3+的掺杂量为0.05%(原子分数)时,经过900℃焙烧后催化剂降解能力最高,其活性超过商用P25的2倍多.在较高La3+掺杂量(超过0.20%)时,900℃焙烧后一定量La3+进入TiO2的晶格结构而大大抑制了TiO2结晶;这种强烈的抑制作用使得催化剂中存在大量无定形结构TiO2,无定形TiO2甚至多于700℃焙烧后的催化剂,反而大大抑制了弱光体系中催化剂活性.     

不同流态下微波辐射对污水污泥性质的影响研究

通过对不同流态下微波辐射对污水污泥性质的影响进行研究,考察了不同流态下微波辐射作用处理后污泥沉降性能、脱水性能的变化,以及微波辐射作用下流态对污泥挥发性悬浮固体(VSS)溶解率、上清液中COD和污泥微观形态的影响.结果表明,流态对污泥的沉降性能和脱水性能有一定影响,微波辐射功率越高,流态对污泥沉降性能和脱水性能的影响越显著.微波辐射功率较低时,雷诺数Re越大,污泥的沉降比(SV)、比阻和泥饼含水率越小;微波辐射功率较高时,Re为2300的临界流态下污泥的沉降性能和脱水性能最好.随着Re的增大,VSS溶解率和上清液中COD升高,微波辐射功率分别为300、500、700和900W时,Re为3000的紊流流态下上清液中COD分别达到1.1、2.1、3.6和6.7g·L-1.SEM观察结果表明,微波辐射及流态产生的协同剪切应时适宜时,有利于污泥颗粒的絮凝反应,高强度的微波辐射和紊流产生的较大剪切应力导致污泥絮体被打碎.     

短程硝化颗粒污泥的快速培养与硝化特性研究

以城市污水处理厂剩余污泥为种泥,以2 min沉淀时间为选择压,在序批式反应器(SBR)中快速培养出好氧颗粒污泥。经过60个周期(20 d),反应器内出现砂粒状颗粒,并持续稳定运行120 d。成熟的颗粒污泥平均粒径856.56μm,具有良好的硝化性能。SBR反应器以固定曝气时间方式运行,亚硝酸盐积累率达80%以上,实现了稳定短程硝化。试验结果表明:絮体污泥(即接种污泥)与颗粒污泥的硝化过程相似但略有差异。二者差别在于,氨氮氧化结束后,继续曝气120 min,絮体污泥将亚硝酸盐完全转化为硝酸盐,而颗粒污泥仅将部分亚硝酸盐转化且过程比较缓慢。     

景观用再生水氮磷条件下两种典型水华藻类的生长及竞争规律

针对再生水景观水体的藻类控制,以BG11培养基为基础,设定不同氮磷浓度,对铜绿微囊藻和小球藻进行了纯培养和共培养实验。实验结果表明:初始总氮浓度为15 mg/L、总磷浓度为0.1 mg/L时两种藻就能出现明显的生长高峰;当总氮浓度为3⁴5 mg/L,氮磷比为3045 mg/L,氮磷比为30¹50的情况下,小球藻在与铜绿微囊藻的竞争中容易成为优势藻种。     

Research on the evolvement of morphology of coking coal during the coking process

The evolvement of morphology and structure of the coal with different metamorphic degrees during coking process in the vertical furnace was investigated by infrared Image detector. Moreover, the temperature distribution in the radial direction and the crack formation were also studied in heating process. The results show that the amount of crack and the shrinkage level of char decrease with the coal rank rising. In addition, the initial temperature of crack formation for char increases with the coal rank rising.     

Interface-mediated synthesis of monodisperse ZnS nanoparticles with sulfate-reducing bacterium culture

We have created a new method of ZnS nanospheres synthesis. By interface-mediated precipitation method (IMPM), monodisperse ZnS nanoparticles was synthesized on the particle surface of sulfate-reducing bacterium nutritious agar culture. Sulfate-reducing bacterium (SRB) was used as a sulfide producer because of its dissimilatory sulfate reduction capability, meanwhile produced a variety of amino acids acting as templates for nanomaterials synthesis. Then zinc acetate was dispersed into nutritious agar plate. Subsequently agar plate was broken into particles bearing much external surface, which successfully mediated the synthesis of monodisperse ZnS nanoparticles. The morphology of monodisperse ZnS nanospheres and SRB were examined by scanning electron microscopy (SEM), and the microstructure was investigated by X-ray diffraction (XRD). The thermostability of ZnS nanoparticles was determined by thermo gravimetric-differential thermo gravimetric (TG-DTG). The maximum absorption wavelengh was analysed with an ultraviolet-visible spectrophotometer within a range of 199–700 nm. As a result, monodisperse ZnS nanoparticles were successfully synthesized, with an average diameter of 80 nm. Maximum absorption wavelengh was 228 nm, and heat decomposed temperature of monodisperse ZnS nanoparticles was 596°C.     

Interface-mediated synthesis of monodisperse ZnS nanoparticles with sulfate-reducing bacterium culture

We have created a new method of ZnS nanospheres synthesis. By interface-mediated precipitation method (IMPM), monodisperse ZnS nanoparticles was synthesized on the particle surface of sulfate-reducing bacterium nutritious agar culture. Sulfate-reducing bacterium (SRB) was used as a sulfide producer because of its dissimilatory sulfate reduction capability, meanwhile produced a variety of amino acids acting as templates for nanomaterials synthesis. Then zinc acetate was dispersed into nutritious agar plate. Subsequently agar plate was broken into particles bearing much external surface, which successfully mediated the synthesis of monodisperse ZnS nanoparticles. The morphology of monodisperse ZnS nanospheres and SRB were examined by scanning electron microscopy (SEM), and the microstructure was investigated by X-ray diffraction (XRD). The thermostability of ZnS nanoparticles was determined by thermo gravimetric-differential thermo gravimetric (TG-DTG). The maximum absorption wavelengh was analysed with an ultravioletvisible spectrophotometer within a range of 199-700 nm. As a result, monodisperse ZnS nanoparticles were successfully synthesized, with an average diameter of 80 nm. Maximum absorption wavelengh was 228 nm, and heat decomposed temperature of monodisperse ZnS nanoparticles was 596℃.