Surface and subsurface phosphorus losses from fertilized pasture systems in Ohio

Phosphorus is an essential plant nutrient and critical to agricultural production, but it is also a problem when excessive amounts enter surface waters. Summer rotational grazing and winter feeding beef pasture systems at two fertility levels (56 and 28 kg available P ha(-1)) were studied to evaluate the P losses from these systems via surface runoff and subsurface flow using eight small (0.3-1.1 ha), instrumented watersheds and spring developments. Runoff events from a 14-yr period (1974-1988) were evaluated to determine the relationships between event size in mm, total dissolved reactive phosphorous (TDRP) concentration, and TDRP transport. Most of the TDRP transported was via surface runoff. There were strong correlations (r2 = 0.45-0.66) between TDRP transport and event size for all watersheds, but no significant (P = 0.05) correlations between TDRP concentration and event size. Flow-weighted average TDRP concentrations from the pasture watersheds for the 14-yr period ranged from 0.64 to 1.85 mg L(-1) with a few individual event concentrations as high as 85.7 mg L(-1). The highest concentrations were in events that occurred soon after P fertilizer application. Average seasonal flow-weighted TDRP concentrations for subsurface flow were < 0.05 mg L(-1). Applying P fertilizer to pastures in response to soil tests should keep TDRP concentrations in subsurface flow at environmentally acceptable levels. Management to reduce runoff and avoidance of P fertilizer application when runoff producing rainfall is anticipated in the next few days will help reduce the surface losses of P.     

Social vulnerability to climate change: a review of concepts and evidence

Regional Environmental Change - This article provides a review of recent scientific literature on social vulnerability to climate change, aiming to determine which social and demographic groups,...     

Three lessons conservation science can learn from the COVID-19 pandemic

Article impact statement: COVID-19 has demonstrated the need to optimize research activity, convey the gravity of loss, and reevaluate merit in conservation science.     

Temporal shifts in the fatty acid profiles of rocky intertidal invertebrates

Fatty acid profiles were determined in rocky intertidal suspension-feeders (mussels and polychaetes) and grazers (limpets and sea urchins) on a monthly basis over 1 year to assess potential dietary overlap between consumers occupying the same trophic guild, and any temporal shifts in diets. Both reproductive and non-reproductive tissues were assessed in an attempt to separate influences of food quality with those of life cycle. Relative variability in fatty acids over time could not be predicted from the feeding guild occupied by a consumer, and influential factors of the temporal shifts included both dietary and reproductive dynamics (even in muscle tissues). Species in the same trophic guild occupied separate trophic niches throughout the year, hence minimising competitive interactions regarding food acquisition. Based on overall variation in fatty acid profiles of muscle tissues, the suspension-feeders Perna perna and Gunnarea gaimardi and the grazing limpet Cymbula oculus occupied narrower feeding niches relative to the grazing sea urchin Parechinus angulosus. Our results provide compelling evidence for potentially large changes in the lipid composition of intertidal invertebrate populations over relatively small temporal scales (i.e. month to month), and these have important implications for short-term field collections intended for assessing invertebrate diets.     

Trade‐offs and efficiencies in optimal budget‐constrained multispecies corridor networks

Conservation biologists recognize that a system of isolated protected areas will be necessary but insufficient to meet biodiversity objectives. Current approaches to connecting core conservation areas through corridors consider optimal corridor placement based on a single optimization goal: commonly, maximizing the movement for a target species across a network of protected areas. We show that designing corridors for single species based on purely ecological criteria leads to extremely expensive linkages that are suboptimal for multispecies connectivity objectives. Similarly, acquiring the least‐expensive linkages leads to ecologically poor solutions. We developed algorithms for optimizing corridors for multispecies use given a specific budget. We applied our approach in western Montana to demonstrate how the solutions may be used to evaluate trade‐offs in connectivity for 2 species with different habitat requirements, different core areas, and different conservation values under different budgets. We evaluated corridors that were optimal for each species individually and for both species jointly. Incorporating a budget constraint and jointly optimizing for both species resulted in corridors that were close to the individual species movement‐potential optima but with substantial cost savings. Our approach produced corridors that were within 14% and 11% of the best possible corridor connectivity for grizzly bears (Ursus arctos) and wolverines (Gulo gulo), respectively, and saved 75% of the cost. Similarly, joint optimization under a combined budget resulted in improved connectivity for both species relative to splitting the budget in 2 to optimize for each species individually. Our results demonstrate economies of scale and complementarities conservation planners can achieve by optimizing corridor designs for financial costs and for multiple species connectivity jointly. We believe that our approach will facilitate corridor conservation by reducing acquisition costs and by allowing derived corridors to more closely reflect conservation priorities.     

Future habitat loss and extinctions driven by land‐use change in biodiversity hotspots under four scenarios of climate‐change mitigation

Numerous species have been pushed into extinction as an increasing portion of Earth's land surface has been appropriated for human enterprise. In the future, global biodiversity will be affected by both climate change and land‐use change, the latter of which is currently the primary driver of species extinctions. How societies address climate change will critically affect biodiversity because climate‐change mitigation policies will reduce direct climate‐change impacts; however, these policies will influence land‐use decisions, which could have negative impacts on habitat for a substantial number of species. We assessed the potential impact future climate policy could have on the loss of habitable area in biodiversity hotspots due to associated land‐use changes. We estimated past extinctions from historical land‐use changes (1500–2005) based on the global gridded land‐use data used for the Intergovernmental Panel on Climate Change Fifth Assessment Report and habitat extent and species data for each hotspot. We then estimated potential extinctions due to future land‐use changes under alternative climate‐change scenarios (2005–2100). Future land‐use changes are projected to reduce natural vegetative cover by 26‐58% in the hotspots. As a consequence, the number of additional species extinctions, relative to those already incurred between 1500 and 2005, due to land‐use change by 2100 across all hotspots ranged from about 220 to 21000 (0.2% to 16%), depending on the climate‐change mitigation scenario and biological factors such as the slope of the species–area relationship and the contribution of wood harvest to extinctions. These estimates of potential future extinctions were driven by land‐use change only and likely would have been higher if the direct effects of climate change had been considered. Future extinctions could potentially be reduced by incorporating habitat preservation into scenario development to reduce projected future land‐use changes in hotspots or by lessening the impact of future land‐use activities on biodiversity within hotspots.     

Cement and concrete flow analysis in a rapidly expanding economy: Ireland as a case study

A national material flow model for concrete, the most popular construction material in Ireland, was developed based on the framework of material flow analysis. Using this model the Irish concrete cycle for the year 2007 was constructed by analysing the material life cycle of concrete which consists of the three phases of: production (including extraction of raw materials and manufacture of cement), usage (ready-mix and other products) and waste management (disposal or recovery). In this year, approximately 35 million metric tonnes of raw materials were consumed to produce 5 million metric tonnes of cement and 33 million metric tonnes of concrete. Concrete production was approximately 8 metric tonnes per capita. By comparison, the concrete waste produced in that year was minimal at only 0.3 million metric tonnes. Irish building stock is young and there was little demolition of structures in the year of study. However this build up of construction stock will have implications for the future waste flows when the majority of stock built in the last decade (43% of residential stock was constructed in the last 15 years) reaches its end of life.     

Assessing the potential of yield improvements, through process scrap reduction, for energy and CO2 abatement in the steel and aluminium sectors

Targets to cut 2050 CO₂ emissions in the steel and aluminium sectors by 50%, whilst demand is expected to double, cannot be met by energy efficiency measures alone, so options that reduce total demand for liquid metal production must also be considered. Such reductions could occur through reduced demand for final goods (for instance by life extension), reduced demand for material use in each product (for instance by lightweight design) or reduced demand for material to make existing products. The last option, improving the yield of manufacturing processes from liquid metal to final product, is attractive in being invisible to the final customer, but has had little attention to date. Accordingly this paper aims to provide an estimate of the potential to make existing products with less liquid metal production.Yield ratios have been measured for five case study products, through a series of detailed factory visits, along each supply chain. The results of these studies, presented on graphs of cumulative energy against yield, demonstrate how the embodied energy in final products may be up to 15 times greater than the energy required to make liquid metal, due to yield losses. A top-down evaluation of the global flows of steel and aluminium showed that 26% of liquid steel and 41% of liquid aluminium produced does not make it into final products, but is diverted as process scrap and recycled. Reducing scrap substitutes production by recycling and could reduce total energy use by 17% and 6% and total CO₂ emissions by 16% and 7% for the steel and aluminium industries respectively, using forming and fabrication energy values from the case studies. The abatement potential of process scrap elimination is similar in magnitude to worldwide implementation of best available standards of energy efficiency and demonstrates how decreasing the recycled content may sometimes result in emission reductions.Evidence from the case studies suggests that whilst most companies are aware of their own yield ratios, few, if any, are fully aware of cumulative losses along their whole supply chain. Addressing yield losses requires this awareness to motivate collaborative approaches to improvement.     

Alternative mating tactics in dimorphic males of the harvestman <Emphasis Type="Italic">Longiperna concolor</Emphasis> (Arachnida: Opiliones)

Intense male–male competition for females may drive the evolution of male morphological dimorphism, which is frequently associated with alternative mating tactics. Using modern techniques for the detection of discontinuous allometries, we describe male dimorphism in the Neotropical harvestman Longiperna concolor, the males of which use their elongated, sexually dimorphic legs IV in fights for the possession of territories where females lay eggs. We also tested three predictions related to the existence of alternative mating tactics: (1) if individuals with relatively longer legs IV (majors) are more likely to monopolize access to reproductive resources, they are expected to remain close to stable groups of females more than individuals with relatively shorter legs IV (minors) do; (2) if minors achieve fertilization by moving between territories, they are expected to be less faithful to specific sites; and (3) majors should be observed in aggressive interactions more often. We individually marked all the individuals from a population of Longiperna during the reproductive season and recorded the location of each sighting for males and females as well as the identity of males involved in fights. Majors were more likely to have harems, and large majors were even more likely to do so. Majors were more philopatric and all males involved in fights belonged to this morph. These results strongly suggest that the mating tactic of the majors is based on resource defense whereas that of the minors probably relies on sneaking into the territories of the majors and furtively copulating with females.