Biosynthesis of Poly(3-hydroxybutyrate) from Cheese Whey by <Emphasis Type="Italic">Bacillus megaterium</Emphasis> NCIM 5472

Microbial polyhydroxyalkonate such as homopolyester of poly(3-hydroxybutyrate) (PHB) was produced from cheese whey by Bacillus megaterium NCIM 5472. Due to their numerous potential industrial applications, the focus was given to competently enhance the amount of PHB produced. The amount of PHB produced from whole cheese whey, and ultrafiltered cheese whey was first compared, and after observing a rise in PHB production by using ultrafiltered cheese whey, cheese whey permeate was chosen for further analysis. The presence of PHB was then confirmed by GCMS. Since the main aim of the study was to increase the amount of PHB produced through batch fermentation, various process parameters like time, pH, C/N ratio, etc. were optimized. After optimization, it was found that B. megaterium NCIM 5472 was capable of accumulating 75.5% of PHB of its dry weight and a PHB yield of 8.29 g/L. The chemical structure of the polymer was further analyzed by using FTIR and NMR spectroscopy methods. Also, the physical and thermal properties were studied by using Differential scanning calorimetry and Thermogravimetric analysis. It was found that the polymer produced had excellent thermal stability, thus allowing the possibility to exploit its properties for industrial purposes such as adhesives, packaging materials, etc.     

Study on the hydrogeochemical characteristics in groundwater, post- and pre-tsunami scenario, from Portnova to Pumpuhar, southeast coast of India

Natural hazards cause great damage to humankind and the surrounding ecosystem. They can cast certain indelible changes on the natural system. One such tsunami event occurred on 26 December 2004 and caused serious damage to the environment, including deterioration of groundwater quality. This study addresses the groundwater quality variation before and after the tsunami from Pumpuhar to Portnova in Tamil Nadu coast using geochemical methods. As a part of a separate Ph.D. study on the salinity of groundwater from Pondicherry to Velankanni, water quality of this region was studied with the collection of samples during November 2004, which indicated that shallow aquifers were not contaminated by sea water in certain locations. These locations were targeted for post-tsunami sample collection during the months of January, March and August 2005 from shallow aquifers. Significant physical mixing (confirmed with mixing models) within the aquifer occurred during January 2005, followed by precipitation of salts in March and complete leaching and dissolution of these salts in the post-monsoon season of August. As a result, maximum impact of tsunami water was observed in August after the onset of monsoon. Tsunami water inundated inland water bodies and topographic lows where it remained stagnant, especially in the near-shore regions. Maximum tsunami inundation occurred along the fluvial distributary channels, and it was accelerated by topography to a certain extent where the southern part of the study area has a gentler bathymetry than the north.     

Simulating Soil Water Content,Evapotranspiration, and Yield of Variably Irrigated Grain Sorghum Using AquaCrop

Use of models to simulate crop production has become important in optimizing irrigation management in arid and semiarid regions. However, applicability and performance of these models differ across regions, due to differences in environmental and management factors. The AquaCrop model was used to simulate soil water content (SWC), evapotranspiration (ET), and yield for grain sorghum under different irrigation regimes and dryland conditions at two sites in Central and Southern High Plains. Prediction error (P_e), estimated as the difference between simulated and measured divided by measured, for SWC ranged from ?17% to 4% in fully irrigated, ?3% to ?10% in limited irrigated, and ?16% to 25% in dryland treatments. The P_e within ±4%, ?5%, and ?17% to 24% were attained for seasonal ET under fully irrigated, limited irrigated, and dryland conditions, respectively. P_e values for grain yield were within those previously reported and ranged from ?10% to 12%, ?12% to 7%, and 9% to 17% for fully irrigated, limited irrigated and dryland conditions, respectively. Overall performance of the AquaCrop model showed it could be used as an effective tool for evaluating the impacts of variable crop and irrigation managements on the production of grain sorghum in the study area. Finally, the application of the model in the study area revealed planting date has a significant impact on sorghum yield and irrigation requirements, but the impact of planting density was negligible. Editor's note : This paper is part of the featured series on Optimizing Ogallala Aquifer Water Use to Sustain Food Systems. See the February 2019 issue for the introduction and background to the series.     

Interaction Effects of Metals and Salinity on Biodegradation of a Complex Hydrocarbon Waste

Abstract

The presence of high levels of salts because of produced brine water disposal at flare pits and the presence of metals at sufficient concentrations to impact microbial activity are of concern to bioremediation of flare pit waste in the upstream oil and gas industry. Two slurry-phase biotreatment experiments based on three-level factorial statistical experimental design were conducted with a flare pit waste. The experiments separately studied the primary effect of cadmium [Cd(II)] and interaction effect between Cd(II) and salinity and the primary effect of zinc [Zn(II)] and interactioneffect between Zn(II) and salinity on hydrocarbon biodegradation. The results showed 42–52.5% hydrocarbon removal in slurries spiked with Cd and 47–62.5% in the slurries spiked with Zn. The analysis of variance showed that the primary effects of Cd and Cd–salinity interaction were statistically significant on hydrocarbon degradation. The primary effects of Zn and the Zn-salinity interaction were statistically insignificant, whereas the quadratic effect of Zn was highly significant on hydrocarbon degradation. The study on effects of metallic chloro-complexes showed that the total aqueous concentration of Cd or Zn does not give a reliable indication of overall toxicity to the microbial activity in the presence of high salinity levels.     

Effect of marble dust on plants around Vishwakarma Industrial Area (VKIA) in Jaipur, India

The paper describes the effect of marble dust on plants in and around Vishwakarma Industrial Area (VKIA) Jaipur, Rajasthan (India). Trees species growing in and around VKIA area were selected and various morphological characteristics were studied such as leaf area dry weight ratio (LADWR), Dust retaining capacity (DRC) and Chlorophyll content. In the study the effects of marble dust on selected tree species was observed. LADWR was recorded maximunm 217.90 cm2 g(-1) dry wt. in Polyalthia longifolia in VKIA and minimum 98.74 cm2 g(-1) dry wt. in Ficus religiosa in Nindar whereas The DRC was observed maximum 178.51 mg cm(-2) in Azadirachta indica in VKIA as well as minimum recorded 66.41 mg cm(-2) in Thevetie pervvianain in Vidyadher Nagar. However the Total Chlorophyll Content was also determined and it was found maximum in Bougainvillea i.e. 2.949 mg g(-1) (fresh wt.) in VKIA whereas minimum for Nindar i.e. 0.784 mg g(-1) (fresh wt.) in Ficus religiosa.     

Classification of floristic composition of mangrove forests using hyperspectral data: case study of Bhitarkanika National Park, India

The aim of the present work is to unveil the potential of some of the unexplored remote sensing techniques for mangrove studies. The paper deals with the classification of an Earth Observing–1 Hyperion image of the mangrove area of Bhitarkanika National Park, Odisha, India into mangrove floristic composition classes. Out of 196 calibrated bands of the image, 56 were found to be highly uncorrelated and contained maximum information; therefore, these 56 bands were used for classification. Amongst the three full–pixel classifiers tested in the investigation, Support Vector Machine produced the best results in terms of training pixel accuracy with overall precision of 96.85 %, in comparison to about 70–72.0 % for the other two classifiers. A total of five mangrove classes were obtained – pure or dominant class of Heritiera fomes, mixed class of H. fomes, mixed Excoecaria agallocha with Avicennia officinalis, mixed class of fringing Sonneratia apetala and class comprising of mangrove associates with salt resistant grasses. Post–classification field data also established the same. Pure or dominant classes of H. fomes occupied more than 50 % of the total mangrove vegetation in the forest blocks of the National Park. Spectral profile matching of image pixels with that of in–situ collected canopy reflectance profile revealed good match for H. fomes (pure or dominant stands). Red–edge index, which was a preferred criterion for matching was notably correlated in case of H. fomes and E. agallocha. The outcomes indicated the efficacy of hyperspectral canopy reflectance library for such kind of work. It is hoped that the methodology presented in this paper will prove to be useful and may be followed for producing mangrove floristic maps at finer levels.     

A comparative study on the physicochemical and bacterial analysis of drinking, borewell and sewage water in the three different places of Sivakasi

The drinking, borewell and sewage water in the Sanmugasikamani Nadar (S.N) street, Naivatti Nadar (N.N) street and Thiruthangal area of Sivakasi has been studied. The various constituents monitored include the physicochemical characters like pH, total solids, total dissolved solids, total suspended solids; chemical parameters like total alkalinity acidity free CO2, dissolved oxygen, total hardness, calcium, magnesium, chloride, salinity and bacterial parameters like standard plate count (SPC), total coliform count (TCC), faecal coliform count (FCC), faecal streptococcal count (FSC). Most of the physicochemical characters of drinking and borewell water were within the ISI permissible level. However in water samples from all the sites, bacterial count exceeded the recommended permissible level of WHO. Introduction of sewage into the drinking and borewell water was the main reason for the bacterial contamination. The boiling of water is therefore advisable before consumption. The physicochemical and bacterial characters of the sewage water were unworthy. The sewage water recycling was necessary to minimize the water born diseases.     

Origin and nature of spermatophoric mass of the spiny lobster Panulirus homarus

In the spiny lobster Panulirus homarus (Linnaeus) the spermatophoric mass consists of a highly convoluted tube, containing the sperm mass and a gelatinous matrix. The spermatophoric components have their origin in the proximal vas deferens and the completed spermatophoric mass is stored within the distal dilated part of the vas deferens. In the proximal vas deferens the inner glandular epithelial cells give rise to leaf-like typhlosoles which gradually diminish in size and finally disappear in the distal vas deferens. The secretions originating from the typhlosole form the outer gelatinous matrix of the spermatophoric mass. Histochemical observations reveal that the wall of the spermatophore tube consists of neutral mucopolysaccharide, whereas the sperm mass and the gelatinous matrix are rich in acidic mucopolysaccharides. Both polyacrylamide gel electrophoresis and agarose gel electrophoresis were used to separate the acidic mucopolysaccharide (AMPS) complexed with the proteins and the simple proteins. In addition, AMPS have been isolated following the method of Rahemtulla and Lovtrup (1974) and used for electrophoresis. In both the polyacrylamide gel electrophoresis and agarose gel electrophoresis, the extracted acid mucopolysaccharides give only a single fraction which, in comparison with the standard acid mucopolysaccharides, corresponds to chondroitin sulphate. The functional significance of the chondroitin sulphate and neutral mucopolysaccharides in the spermatophoric components of P. homarus is discussed in relation to their functional role in spermatophore hardening and protection of the delicate spermatozoa during their prolonged storage on the sternum of the female.     

Characterization of products formed in the reaction of ozone with alpha-pinene: case for organic peroxides

The generation of reactive oxygen species (ROS) and their subsequent induced pulmonary and systemic oxidative stress has been implicated as an important molecular mechanism of PM-mediated toxicity. However, recent work has shown that there is significant ROS associated with ambient PM. In order to understand the formation mechanisms as well as understand the potential health effects of particle-bound oxidative species, the alpha-pinene-O(3) oxidation chemical system was studied to elucidate the structures of reaction products using liquid chromatography-multiple stage mass spectrometry (LC-MS(n)). The classes of compounds identified based on their multiple stage-MS fragmentation patterns, mechanistic considerations of alpha-pinene-O(3) oxidation, and general fragmentation rules, of the products from this reaction system were highly oxygenated species, predominantly containing hydroperoxide and peroxide functional groups. The oxidant species observed were clearly stable for the 1-3 h that elapsed during aerosol collection and analysis, and probably for much longer, thus rendering it possible for these species to bind onto particles forming fine particulate organic peroxides that concentrate on the particles and could deliver concentrated doses of ROS in vivo to tissue.