SARA Title III,Section 313 —Looking Ahead

This study performed a workplace evaluation of emission control using available air sampling filters and characterized the emitted particles captured in filters. Characterized particles were contained in the exhaust gas released from carbon nanotube (CNT) synthesis using chemical vapor deposition (CVD). Emitted nanoparticles were collected on grids to be analyzed using transmission electron microscopy (TEM). CNT clusters in the exhaust gas were collected on filters for investigation. Three types of filters, including Nalgene surfactant-free cellulose acetate (SFCA), Pall A/E glass fiber, and Whatman QMA quartz filters, were evaluated as emission control measures, and particles deposited in the filters were characterized using scanning transmission electron microscopy (STEM) to further understand the nature of particles emitted from this CNT production. STEM analysis for collected particles on filters found that particles deposited on filter fibers had a similar morphology on all three filters, that is, hydrophobic agglomerates forming circular beaded clusters on hydrophilic filter fibers on the collecting side of the filter. CNT agglomerates were found trapped underneath the filter surface. The particle agglomerates consisted mostly of elemental carbon regardless of the shapes. Most particles were trapped in filters and no particles were found in the exhaust downstream from A/E and quartz filters, while a few nanometer-sized and submicrometer-sized individual particles and filament agglomerates were found downstream from the SFCA filter. The number concentration of particles with diameters from 5 nm to 20 µm was measured while collecting particles on grids at the exhaust piping. Total number concentration was reduced from an average of 88,500 to 700 particle/cm³ for the lowest found for all filters used. Overall, the quartz filter showed the most consistent and highest particle reduction control, and exhaust particles containing nanotubes were successfully collected and trapped inside this filter.

Implications: As concern for the toxicity of engineered nanoparticles grows, there is a need to characterize emission from carbon nanotube synthesis processes and to investigate methods to prevent their environmental release. At this time, the particles emitted from synthesis were not well characterized when collected on filters, and limited information was available about filter performance to such emission. This field study used readily available sampling filters to collect nanoparticles from the exhaust gas of a carbon nanotube furnace. New agglomerates were found on filters from such emitted particles, and the performance of using the filters studied was encouraging in terms of capturing emissions from carbon nanotube synthesis.     

Potential of 2, 4‐dichlorophenoxyacetic acid conjugates as promutagens in the salmonella/microsome mutagenicity test

Abstract

Hepatic S9 preparations from Aroclor 1254 induced rats and 3‐methylcholanthrene induced woodchucks were used to investigate, in vitro, the mutagenic potential of five amino acid conjugates of 2, 4‐Dichlorophenoxyacetic acid (alanine, aspartic acid, leucine, methionine and tryptophan). Five strains of Salmonella typhimurium (TA97, TA98, TA100, TA1535, TA1538) were utilized for this purpose. Dose‐response effects producing a two‐fold increase of revertants over spontaneous levels were not observed with either S9 preparation indicating that the amino acid conjugates are not promutagens in these assays.     

Persistence of granular and EC formulations of chlorpyrifos in a mineral and an organic soil incubated in open and closed containers

Abstract

Samples of a mineral soil (Plainfield sand) and an organic soil (muck) were treated with granular and EC formulations of chlorpyrifos and incubated at 27±1°C and 65±5% RH in open and closed containers. Duplicate samples of each soil‐formulation‐container combination were analyzed for residual chlorpyrifos during a 23 wk period. The disappearance rates observed demonstrate that the relative importance of formulation and containment on overall persistence depends on soil type. For the mineral soil, disappearance was slower from closed containers and formulation had only a slight effect while, in the organic soil the granular formulation disappeared slower than the EC and there was little difference between open and closed containers. The relative importance of degradation and volatilization in the disappearance of chlorpyrifos from soil is discussed.     

Methodology for Comparison of Open-Path Monitors with Point Monitors

The first measurements of a dispersed secondary pollutant (O₃) using a CO₂ laser based, open-path monitor are compared to readings from a chemiluminescence point monitor which traverses a common measurement path of 0.67 km. A statistical treatment is given which establishes the accuracy of comparison. Meteorological conditions as reflected by changes in pollutant variability are shown to influence the accuracy of comparison. The essential equivalence of data obtained by the point monitor and the path monitor is confirmed for selected measurement sequences while other measurement sequences identify non-optimized performance of the path monitor.     

An Air Quality Data Analysis System for Interrelating Effects,Standards, and Needed Source Reductions: Part 4. A Three-Parameter Averaging-Time Model

Urban air pollutant concentration data often tend to fit a two-parameter averaging-time model having three characteristics: (1) pollutant concentrations are (two-parameter) lognormally distributed for all averaging times; (2) median concentrations are proportional to averaging time raised to an exponent; and (3) maximum concentrations are approximately inversely proportional to averaging time raised to an exponent. Concentration data obtained near many isolated point sources and in some urban areas often do not fit a two-parameter lognormal distribution. An increment (either positive or negative) can be added to each such concentration in order to fit the data instead to a three-parameter lognormal distribution. This increment has been incorporated as the third parameter in a new three-parameter averaging-time model that can be used in both point-source and urban settings. Examples show how this new model can be used to analyze SO₂ concentration data obtained near a point source to determine the degree of emission reduction needed to achieve the national ambient air quality standards.     

Analysis of the impact of the forest fires in August 2007 on air quality of Athens using multi-sensor aerosol remote sensing data,meteorology and surface observations

Data from multiple satellite remote sensors are integrated with ground measurements and meteorological data to study the impact of Greek forest fires in August 2007 on the air quality in Athens. Two pollution episodes were identified by ground PM₁₀ measurements between August 23 and September 4. In the first episode, Evia and Peloponnese fires contributed substantially to the air pollution levels in Athens. In the second episode, transport of industrial pollution from Italy and Western Europe as well as forest fires in Albania contributed substantially to the air pollution levels in Athens. Local air pollution sources also contributed to the observed particle levels during these episodes. Satellite data provide valuable insights into the spatial distribution of particle concentrations, thus they can be used identify pollution sources. In spite of a few weaknesses in current satellite data products identified in this analysis, combining satellite aerosol remote sensing data with trajectory models and ground measurements is a powerful tool to study intensive particle pollution events such as forest fires.     

Equivocating on the polluter-pays principle: The consequences for Pakistan

The polluter-pays principle has been widely implemented in OECD countries and credited for bring about a significant reduction in pollutant discharge. However, it has had only limited implementation in developing countries. The consequences of not implementing it in developing countries, to the extent they are documented, are limited to estimating the economic damages of environmental degradation. Yet there are several other but seldom documented negative consequences of the failure to implement the polluter-pays principle. These consequences are documented in the case of Pakistan. They include limited construction of effluent treatment plants, heavy dependence on the government and international donors for funding the only two operational common effluent treatment plants, significant operational issues at the two common effluent treatment plants, missed opportunities to build cost-effective common effluent treatment plants and minimal environmental improvements from isolated investments in individual effluent treatment plants in addition to the already documented significant level of environmental degradation due to uncontrolled pollutant discharge.     

Satellite Precipitation Measurements for Water Resource Monitoring1

Abstract: Satellites offer an unrivaled vantage point to observe and measure Earth system processes and parameters. Observations of meteorological phenomena permit a more holistic view of the weather and climate that is not possible through conventional surface observations. Precipitation (rain and snow) in particular, benefit from such observations since precipitation is spatially and temporally highly variable: conventional gauge and radar measurements tend to be land‐based with variable coverage. This paper provides an overview of the satellite systems that provide the observations, the techniques used to derive precipitation from the observations, and examples of the precipitation products available for users to access.