Determination of organic compounds in landfill leachates treated by Fenton–Adsorption

The objective of this study was to identify the organic compounds removed from the leachate when treated with Fenton–Adsorption by gas chromatography coupled to mass spectrometry (GC–MS) in order to identify toxic compounds that could be harmful for the environment or human health.The physicochemical characterization of the raw leachate was carried out before and after the Fenton–Adsorption process. The effluent from each stage of this process was characterized: pH, Biological Oxygen Demand (BOD₅), Chemical Oxygen Demand (COD), Total Organic Carbon (TOC), Total Carbon (TC), Inorganic Carbon (IC), Total Solids (TS), Total Suspended Solids (TSS) and Color. The organic compounds were determined by GC–MS.The removal of COD and color reached over 99% in compliance with the Mexican Standard NOM-001-SEMARNAT-1996, which establishes the maximum permissible limits for contaminants present in wastewater discharges to water and national goods. The chromatographic analysis from the Fenton–Adsorption effluent proved that this treatment removed more than 98% of the organic compounds present in the initial sample. The mono (2-ethylhexyl) ester 1,2-benzenedicarboxylic acid persisted, although it is not considered as toxic compound by the NOM-052-SEMARNAT-2005. Therefore, the treated effluent can be safely disposed of into the environment.     

Detection of residual organochlorine and organophosphorus pesticides in agricultural soil in Rio Verde region of San Luis Potosi,Mexico

Organochlorine pesticides were intensively used in Mexico from 1950 until their ban and restriction in 1991. However, the presence of these compounds is commonly reported in many regions of the country. The aim of the present study was to identify and quantify residual organochlorine and organophosphorus pesticides in agricultural soil in Rio Verde region, San Luis Potosi state, which has been identified as possibly polluted by pesticides. Composed samples from 24 zones covering an area of approximately 5,440 ha were analyzed. The most frequently found pesticides were p,p´-DDT followed by ,p,p´-DDE, heptachlor, endosulfan and γ-HCH whose frequency rates were 100, 91, 83 and 54%, respectively. The concentration of p,p´-DDT in the crops grown in these soils was in the following order: chili > maize > tomato > alfalfa. The results obtained in this study show that p,p´-DDT values are lower or similar to those found in other agricultural regions of Mexico. Methyl and ethyl parathion were the most frequent organophosphate pesticide detected in 100% and 62.5% of the samples with average concentrations of 25.20 and 47.48 μg kg^–1, respectively. More research is needed to establish the background levels of pesticides in agricultural soils and their potential ecological and human health effects in this region.     

A formulation to optimize the risk reduction process based on LOPA

This paper presents a mixed integer nonlinear programming (MINLP) model to improve the computational use of the layer of protection analysis (LOPA). For a given set of independent protection layers to be implemented in a process, the proposed optimization model is solved to: a) Include costs associated with the different prevention, protection and mitigation devices, and b) Satisfy the risk level typically specified in the LOPA analysis through the occurrence probability. The underline purpose focuses on improving the analysis process and decision making to obtain the optimal solution in the safeguards selection that satisfies the requirements to be considered as IPL’s. The optimization is based on economic and risk tolerance criteria. As a first stage of this proposal, the safety instrumented system (SIS) design is optimized so that the selection of SIS components minimizes the risk and satisfies the safety integrity level (SIL) requirements. A case study is presented to validate the whole proposed approach.     

A composite polyphenol-rich extract improved growth performance,ruminal fermentation and immunity,while decreasing methanogenesis and excretion of nitrogen and phosphorus in growing buffaloes

Environmental Science and Pollution Research - The effects of a composite polyphenolic-rich extract (CPRE) on ruminal fermentation, nutrient utilisation, growth performance, excretion of nitrogen...     

Serum klotho and its associations with blood and urine cadmium and lead across various stages of glomerular function: data for US adults aged 40–79 years

Environmental Science and Pollution Research - Exposures to cadmium and lead can cause oxidative stress, leading to tissue damage resulting in kidney and cardiovascular diseases. The antiaging...     

Management of Lignite Fly Ash for Improving Soil Fertility and Crop Productivity

Lignite fly ash (LFA), being alkaline and endowed with excellent pozzolanic properties, a silt loam texture, and plant nutrients, has the potential to improve soil quality and productivity. Long-term field trials with groundnut, maize, and sun hemp were carried out to study the effect of LFA on growth and yield. Before crop I was sown, LFA was applied at various doses with and without press mud (an organic waste from the sugar industry, used as an amendment and source of nutrients). LFA with and without press mud was also applied before crops III and V were cultivated. Chemical fertilizer, along with gypsum, humic acid, and biofertilizer, was applied in all treatments, including the control. With one-time and repeat applications of LFA (with and without press mud), yield increased significantly (7.0–89.0%) in relation to the control crop. The press mud enhanced the yield (3.0–15.0%) with different LFA applications. The highest yield LFA dose was 200 t/ha for one-time and repeat applications, the maximum yield being with crop III (combination treatment). One-time and repeat application of LFA (alone and in combination with press mud) improved soil quality and the nutrient content of the produce. The highest dose of LFA (200 t/ha) with and without press mud showed the best residual effects (eco-friendly increases in the yield of succeeding crops). Some increase in trace- and heavy-metal contents and in the level of γ-emitters in soil and crop produce, but well within permissible limits, was observed. Thus, LFA can be used on a large scale to boost soil fertility and productivity with no adverse effects on the soil or crops, which may solve the problem of bulk disposal of fly ash in an eco-friendly manner.     

Energy Use and Sulphur Dioxide Emissions in Asia

This paper presents a review of energy use in 22 selected countries of Asia and estimates the anthropogenic emission of sulphur dioxide (SO₂) for the selected countries, both at national and disaggregated sub-country regional levels. The paper also makes a comparative assessment of the Asian countries in terms of SO₂emission intensity (i.e. emission per GDP), emission per capita and emission density (i.e. emission per unit area). Total SO₂emission in the region was estimated to be about 38 million tons in 1990. Five countries, China, India, South Korea, Japan and Thailand, accounted for over 91% of the regional SO₂emission. Coal use had the dominant share (81%) of the total emission from the region. Among the economic sectors, industry contributed the largest share (49%) to the total emissions of the selected countries as a whole, followed by the power sector (30%). These findings suggest the need for mitigation strategies focussed on the industry and power sectors of the major emitting countries in Asia.     

Optimal carbon mitigation strategy under non-linear feedback effects and in the presence of permafrost release trigger hazard

The threat of release of methane sequestered in the circumpolar Arctic regions of the world creates the possibility of triggering additional feedback effects from the terrestrial and the deep ocean systems which could potentially add large amounts of carbon (C) into the atmosphere. This paper analyses the implications for C mitigation policy under the threats of a substantial permafrost methane release. Several insights emerge from the analysis. First, the presence of non-linear feedbacks creates a bifurcation zone in the C emissions-stock space, on one side of which large accumulations of atmospheric C materialize leading to significant damages. Second, the bifurcation line does not have a steep slope, implying that it would be possible to avoid falling on the wrong side of this zone even if the current atmospheric stock of C were higher than what they are today. Third, when the release of permafrost C is uncertain, there is benefit in reducing anthropogenic C more than what would be optimal under a certain release of the same. Fourth, higher abatement cost scenarios do not necessarily imply significantly reduced abatement efforts. On the contrary, abatement efforts, which are only reduced marginally under this scenario, ensure that long run carbon path is stabilized. This is done in order to avoid incurring substantial costs of abatement in the future when non-linear feedback effects kick in.     

Tropical montane cloud forests: current threats and opportunities for their conservation and sustainable management in Mexico

Tropical montane cloud forests (TMCF) are among the most threatened ecosystems globally in spite of their high strategic value for sustainable development due to the key role played by these forests in hydrological cycle maintenance and as reservoirs of endemic biodiversity. Resources for effective conservation and management programs are rarely sufficient, and criteria must be applied to prioritize TMCF for conservation action. This paper reports a priority analysis of the 13 main regions of TMCF distribution in Mexico, based on four criteria: (1) forest quality, (2) threats to forest permanence, (3) threats to forest integrity, and (4) opportunities for conservation. Due to the diverse socio-environmental conditions of the local communities living in Mexican TMCF regions, their associated social characteristics were also evaluated to provide a background for the planning of conservation actions. A set of indicators was defined for the measurement of each criterion. To assign priority values for subregions within each main region, an international team of 40 participants evaluated all the indicators using multicriteria decision-making analysis. This procedure enabled the identification of 15 subregions of critical priority, 17 of high priority, and 10 of medium priority; three more were not analysed due to lack of information. The evaluation revealed a number of subjects that had hitherto been undetected and that may prove useful for prioritization efforts in other regions where TMCF is similarly documented and faces equally severe threats. Based on this analysis, key recommendations are outlined to advance conservation objectives in those TMCF areas that are subjected to high pressure on forest resources.     

Natural attenuation of residual heavy metal contamination in soils affected by the Aznalcóllar mine spill, SW Spain

Non-amended soils affected by pyritic sludge residues were monitored for 7 years to assess the long-term natural attenuation ability of these soils. The decrease in both the total concentration of elements (particularly As) and (NH(4))(2)SO(4)-extractable fractions of Mn, and Zn, below the maximum permissible levels indicate a successful natural ability to attenuate soil pollution. Soil acidification by pyrite oxidation and rainfall-enhanced leaching were the largest contributors to the reduction of metals of high (Mn, Cu, Zn and Cd) and low (Fe, Al, and As) availability. Periodic use of correlation and spatial distribution analysis was useful in monitoring elemental dispersion and soil property/element relationships.