Abiotic degradation of imazethapyr in aqueous solution

The photodegradation of imazethapyr [2-(4,5-dihydro-4-méthyl-4-(1-méthylethyl)-5-oxo-1H-imidazol-2-yl)-5-ethyl-3-pyridinecarboxylic acid] in aqueous solution in the presence of titranium dioxide (TiO2) and humic acids (HA) at different ratios of herbicide/TiO2 and herbicide/humic acids was studied at pH 7.0. Irradiation was carried out with polychromatic light using Heraeus apparatus equipped with xenon lamp to simulate sunlight having a spectral energy distribution similar to solar irradiation (>290 nm). The concentration of remaining herbicide was followed using a High Pressure Liquid Chromatograph (HPLC) equipped with UV detector at 230 nm. In pure aqueous solution imazethapyr degrades slowly and the photodegradation leads to the formation of two metabolites labelled A and B. The presence of TiO2 caused enhancement of the degradation rate. The presence of HA induced an increase of the photodegradation of the pesticide with respect to pure aqueous solution.     

Breakthrough CO2 adsorption in bio-based activated carbons

In this work, the effects of different methods of activation on CO₂ adsorption performance of activated carbon were studied. Activated carbons were prepared from biochar, obtained from fast pyrolysis of white wood, using three different activation methods of steam activation, CO₂ activation and Potassium hydroxide (KOH) activation. CO₂ adsorption behavior of the produced activated carbons was studied in a fixed-bed reactor set-up at atmospheric pressure, temperature range of 25–65°C and inlet CO₂ concentration range of 10–30 mol% in He to determine the effects of the surface area, porosity and surface chemistry on adsorption capacity of the samples. Characterization of the micropore and mesopore texture was carried out using N₂ and CO₂ adsorption at 77 and 273 K, respectively. Central composite design was used to evaluate the combined effects of temperature and concentration of CO₂ on the adsorption behavior of the adsorbents. The KOH activated carbon with a total micropore volume of 0.62 cm³/g and surface area of 1400 m²/g had the highest CO₂ adsorption capacity of 1.8 mol/kg due to its microporous structure and high surface area under the optimized experimental conditions of 30 mol% CO₂ and 25°C. The performance of the adsorbents in multi-cyclic adsorption process was also assessed and the adsorption capacity of KOH and CO₂ activated carbons remained remarkably stable after 50 cycles with low temperature (160°C) regeneration.     

From Aminolysis Product of PET Waste to Novel Biodegradable Polyurethanes

Chemical recycling of PET has been developed by various methods. Aminolysis is one of chemical recycling methods of PET has been developed recently. The obtained product using aminolysis, Bis (2-hydroxy ethylene) terephthalamide (BHETA), has the potential for further reactions to obtain useful products. There are few reports on usage of recycled BHETA from PET waste to synthesis of polyurethanes. On the other hand, various biodegradable polyurethanes have been synthesized using polycaprolactone diol. Therefore, caprolactone is a new potential in synthesis of biodegradable polyurethanes from PET waste. In this work, novel biodegradable polyurethanes have been synthesized using BHETA. In this order, at first polyols with different molecular weights have been synthesized through ring opening polymerization of caprolactone by BHETA, then urethane linkages were formed using HDI (Hexamethylene Diisocyanate) without chain extender. Chemical, thermal, mechanical and dynamic mechanical properties, biodegradability, morphology and UV resistance of synthesized polyurethanes have been investigated.     

Elemental composition of particulate matters around Urmia Lake,Iran

Atmospheric particulate matters and their elements were concurrently measured at two sites located in the north and southeast parts of Urmia Lake from January to September 2013. At both sampling sites, average concentrations of total suspended particulate, particles with the aerodynamic diameter of smaller than 10 µm, smaller than 2.5 µm, and smaller than 1 µm were 260 ± 106, 180 ± 73, 30 ± 8, and 25 ± 7 µg m^?3, respectively. The analyzed water soluble ions accounted for approximately 11%–13% mass concentrations of total suspended particulate and 8%–9% of particles smaller than 10 µm, and the sum of the concentrations of the analyzed elements associated with both ranged from 9 to 41 µg m^?3 (6.5%–9.6% in mass) and 7 to 26 µg m^?3 (5.5%–11.3% in mass), respectively. Thus, particulate matter was composed of a complex mixture of minerals such as halite, quartz, gypsum, hexahydrite, and Bassanite.     

Degradation of petroleum hydrocarbons from bottom sludge of crude oil storage tanks using in-vessel composting followed by oxidation with hydrogen peroxide and Fenton

In this research the feasibility of aerated in-vessel composting process followed by chemical oxidation with H₂O₂ and Fenton for removal of petroleum hydrocarbons from oily sludge of crude oil storage tanks was investigated. The ratios of the sludge to immature compost were 1:0 (as abiotic control), 1:2, 1:4, 1:6, 1:8 and 1:10 (as dry basis) at a C:N:P ratio of 100:5:1 and 55 % moisture content for a period of 10 weeks. Six concentrations of H₂O₂ and Fenton were added to the compost mixture for a period of 24- and 48-h reaction times. Results showed that petroleum hydrocarbons removal in ratios of 1:2, 1:4, 1:6, 1:8 and 1:10 were 66.6, 73.2, 74.8, 80.2 and 79.9 %, respectively. The results of the abiotic experiments indicated that the main mechanism of hydrocarbon removal in the composting reactors was biological. The application of combined composting and chemical oxidation demonstrated a remarkable (about 88 %) overall removal. The study showed that in-vessel composting combined with chemical oxidation is a viable choice for the remediation of the sludge.     

Dichloromethane emissions from automotive manufacturing industry in Iran: case study of the SAIPA automotive manufacturing company

The primary data about the role of automotive manufacturing industry in emitting dichloromethane (DCM) to the environment in Iran are provided by a case study of SAIPA Automotive Manufacturing Company in 2012. The average emission rate and emission factor of DCM in the stack exhaust air streams of the solvent-based automotive painting plant were 6.8 kg·d^?1 and 19.5 g per car, respectively. The spray booths had the highest portion (about 85%) of DCM emission in the stack exhaust air streams. The average concentration of DCM (± standard deviation) in the generated wastewater of the factory was 64 ± 12 μg·L^?1, but in the effluent of the factory wastewater treatment plant, it was reduced to a nondetectable level. DCM was also observed in three groundwater wells out of five monitored water resources. To control DCM emission and prevent pollution, the replacement of solvent-based paints with water-based paints is highly recommended.     

Performance evaluation of an anaerobic/aerobic landfill-based digester using yard waste for energy and compost production

The objective of this study was to evaluate a new alternative for yard waste management by constructing, operating and monitoring a landfill-based two-stage batch digester (anaerobic/aerobic) with the recovery of energy and compost. The system was initially operated under anaerobic conditions for 366 days, after which the yard waste was aerated for an additional 191 days. Off gas generated from the aerobic stage was treated by biofilters. Net energy recovery was 84.3MWh, or 46kWh per million metric tons of wet waste (as received), and the biochemical methane potential of the treated waste decreased by 83% during the two-stage operation. The average removal efficiencies of volatile organic compounds and non-methane organic compounds in the biofilters were 96-99% and 68-99%, respectively.     

Photocatalytic removal of diazinon from aqueous solutions: a quantitative systematic review

Environmental Science and Pollution Research - Diazinon is a widely used pesticide that can be effectively degraded in aqueous solutions via photocatalytic oxidation. This quantitative systematic...     

The analysis and probabilistic health risk assessment of polycyclic aromatic hydrocarbons in cereal products

Environmental Science and Pollution Research - The analysis and probabilistic health risk assessment of polycyclic aromatic hydrocarbons (PAHs) in cereal products were done by using magnetic...