The impact of recycled coarse aggregates obtained from waste concretes on lightweight pervious concrete properties

Environmental Science and Pollution Research - Significant environmental damage can result from the use of natural resources such as cement, aggregate, and water in concrete production. Thus, more...     

Liver alterations in Oreochromis niloticus (Pisces) induced by insecticide imidacloprid: Histopathology and heat shock protein in situ localization

Liver is very sensitive to environmental contaminants such as pesticides, it being the first target of toxicity of a substance. The objective of this study was to investigate the possible effects of the insecticide imidacloprid (IMI) on the liver of Oreochromis niloticus according concentrations used for growing sugarcane. A semi-quantitative analysis of histopathological alterations of IMI on liver was performed by light microscopy and cellular labeling of heat shock proteins (HSP70) by immunohistochemistry. The most common changes in liver at all concentrations of IMI were hydropic degeneration, pyknotic nuclei, and loss of cell limits. Steatosis and increased levels of HSP70 were detected in hepatocytes with the highest concentration of IMI. In conclusion, the tested concentrations of IMI induced histopathological changes in the liver of O. niloticus and active defence mechanisms to maintain the morphophysiological integrity of the liver. This insecticide has a toxicity potential for these fish, which is a non-target organism of its action.     

Liquid crystallinity of levan/water/starch solutions

Transmitted light measurements performed with a UV-visible spectrophotometer were used to characterize how starch affects the position of boundaries on the phase diagram for dilute aqueous solutions of levan (a branched polymer of fructose). Data were collected in the range 15 to 70°C; the minimum concentrations required for separation of a nematic phase and the minimum concentration required for a fully nematic solution were identified within this range. While hard interactions (repulsion between rod-like molecular segments) dictate the formation of a liquid crystalline phase at and above ambient temperature in the absence of starch, soft interactions become more significant as solutions are cooled toward ambient when starch is present. Small amounts of starch might be used as a filler to modify the mechanical properties (while retaining the process-related benefits) of levan films cast from liquid crystalline solution.     

Complex co‐substrate addition increases initial petroleum degradation rates during land treatment by altering bacterial community physiology

A pilot‐scale land treatment unit (LTU) was constructed at the former Guadalupe oil production field with the purpose of investigating the effect of co‐substrate addition on the bacterial community and the resulting rate and extent of total petroleum hydrocarbon (TPH) degradation. The TPH was a weathered mid‐cut distillate (C10‐C32) excavated from the subsurface and stockpiled before treatment. A control cell (Cell 1) in the LTU was amended with nitrogen and phosphorus while the experimental cell (Cell 2) was amended with additional complex co‐substrate—corn steep liquor. During the pilot LTU operation, measurements were taken of TPH, nutrients, moisture, aerobic heterotrophic bacteria (AHB), and diesel oxidizing bacteria (DOB). The bacterial community was also assayed using community‐level physiology profiles (CLPP) and 16S rDNA terminal restriction fragment (TRF) analysis. TPH degradation in both cells was characterized by a rapid phase of degradation that lasted for the first three weeks, followed by a slower degradation phase that continued through the remainder of the project. The initial rate of TPH‐degradation in Cell 1 (?0.021 day^?1) was slower than in Cell 2 (?0.035 day^?1). During the slower phase, degradation rates in both cells were similar (?0.0026 and ?0.0024 respectively). AHB and DOB counts were similar in both cells during the fast degradation phase. A second addition of co‐substrate to Cell 2 at the beginning of the slow degradation phase resulted in an increased AHB population that lasted for the remainder of the project but did not affect TPH degradation rates. CLPP data showed that co‐substrate addition altered the functional capacity of the bacterial community during both phases of the project. However, TRF data indicated that the phylogenetic composition of the community was not different in the two cells during the fast degradation phase. The bacterial phylogenetic structure in Cell 2 differed from Cell 1 after the second application of co‐substrate, during the slow degradation phase. Thus, co‐substrate addition appeared to enhance the functional capacity of the bacterial community during the fast degradation phase when the majority of TPH was bioavailable, resulting in increased degradation rates, but did not affect rates during the slow degradation phase when the remaining TPH may not have been bioavailable. These data show that co‐substrate addition might prove most useful for applications such as land farming where TPH is regularly applied to the same soil and initial degradation rates are more important to the project goals. © 2003 Wiley Periodicals, Inc.     

South African mining equipment and specialist services: Technological capacity,export performance and policy

South Africa has developed a technologically sophisticated and globally competitive mining equipment and specialist services sector. The paper provides evidence for and measurement of technological competency and global competitiveness and a brief outline of why South Africa was successful in this regard. While there are significant prospects for future growth, there are, at the same time, a number of constraints and South Africa is becoming a less advantageous site for both production and for innovation. Current government policy does not address these constraints and the sector does not feature in government’s vision for industrial or technology development. An alternative approach is proposed whereby the constraints are addressed and the companies supplying the mining sector that have sophisticated technological competencies are encouraged to spread “laterally” into new products and new global markets. By way of conclusion, the importance of this sector in developing countries where mining plays a major role is outlined.     

Visually determined stream mesohabitats influence benthic macroinvertebrate assessments in headwater streams

Mesohabitat components such as substrate and surface flow types are intimately related to benthic macroinvertebrate assemblages in streams. Visual assessments of the distribution of these components provide a means of evaluating physical habitat heterogeneity and aid biodiversity surveys and monitoring. We determined the degree to which stream site and visually assessed mesohabitat variables explain variability (i.e., beta-diversity) in the relative abundance and presence-absence of all macroinvertebrate families and of Ephemeroptera, Plecoptera, and Trichoptera (EPT) genera. We systematically sampled a wide variety of mesohabitat arrangements as they occured in stream sites. We also estimated how much of the explanation given by mesohabitat was associated with substrate or surface flow types. We performed variation partitioning to determine fractions of explained variance through use of partial redundancy analysis (pRDA). Mesohabitats and stream sites explained together from 23 to 32 % of the variation in the four analyses. Stream site explained 8–11 % of that variation, and mesohabitat variables explained 13–20 %. Surface flow types accounted for >60 % of the variation provided by the mesohabitat component. These patterns are in accordance with those obtained in previous studies that showed the predominance of environmental variables over spatial location in explaining macroinvertebrate distribution. We conclude that visually assessed mesohabitat components are important predictors of assemblage composition, explaining significant amounts of beta-diversity. Therefore, they are critical to consider in ecological and biodiversity assessments involving macroinvertebrates.     

The problem of using fixed-area subsampling methods to estimate macroinvertebrate richness: a case study with Neotropical stream data

Subsampling has been widely applied in the laboratory to process freshwater macroinvertebrate samples. Currently, many governmental agencies and research groups apply the fixed-count approach, targeting a number of individuals per sample, and at the same time keeping track of the number of quadrats (fraction of the sample) processed. However, fixed-area methods are still in use. The objective of this paper was to evaluate the reliability of macroinvertebrate taxonomic richness estimates developed from processing a standard number of subsampling quadrats (i.e., fixed-area approaches). We used a dataset from 18 tropical stream sites experiencing three different levels of human disturbance (most-, intermediate-, and least-disturbed). With 12 quadrats processed (half the sample), the collection curves started to stabilize, and for more than half of the sites studied, it was possible to sample at least 80 % of the total taxonomic richness of the sample. However, we observed that the minimum number of quadrats to achieve 80 % of taxonomic richness was strongly negatively correlated with the number of individuals collected in each site: the fewer the individuals in a sample, the greater the processed proportion of that sample needed to represent it properly. Thus our results indicate that for any given areal subsampling effort (any fixed fraction of the sample), samples with different numbers of individuals will be represented differently in terms of the proportion of the total number of taxa of the whole samples, those with greater numbers being overestimated and those with fewer numbers being underestimated. Therefore, we do not recommend the use of fixed-area subsampling methods alone if the main purpose is to measure and analyze taxonomic richness; instead, we encourage researchers to use fixed-count approaches for this purpose.     

Correspondence of biological condition models of California streams at statewide and regional scales

We used boosted regression trees (BRT) to model stream biological condition as measured by benthic macroinvertebrate taxonomic completeness, the ratio of observed to expected (O/E) taxa. Models were developed with and without exclusion of rare taxa at a site. BRT models are robust, requiring few assumptions compared with traditional modeling techniques such as multiple linear regression. The BRT models were constructed to provide baseline support to stressor delineation by identifying natural physiographic and human land use gradients affecting stream biological condition statewide and for eight ecological regions within the state, as part of the development of numerical biological objectives for California’s wadeable streams. Regions were defined on the basis of ecological, hydrologic, and jurisdictional factors and roughly corresponded with ecoregions. Physiographic and land use variables were derived from geographic information system coverages. The model for the entire state (n?=?1,386) identified a composite measure of anthropogenic disturbance (the sum of urban, agricultural, and unmanaged roadside vegetation land cover) within the local watershed as the most important variable, explaining 56 % of the variance in O/E values. Models for individual regions explained between 51 and 84 % of the variance in O/E values. Measures of human disturbance were important in the three coastal regions. In the South Coast and Coastal Chaparral, local watershed measures of urbanization were the most important variables related to biological condition, while in the North Coast the composite measure of human disturbance at the watershed scale was most important. In the two mountain regions, natural gradients were most important, including slope, precipitation, and temperature. The remaining three regions had relatively small sample sizes (n?≤?75 sites) and had models that gave mixed results. Understanding the spatial scale at which land use and land cover affect taxonomic completeness is imperative for sound management. Our results suggest that invertebrate taxonomic completeness is affected by human disturbance at the statewide and regional levels, with some differences among regions in the importance of natural gradients and types of human disturbance. The construction and application of models similar to the ones presented here could be useful in the planning and prioritization of actions for protection and conservation of biodiversity in California streams.     

Carbon exchange between ecosystems and atmosphere in the Czech Republic is affected by climate factors

By comparing five ecosystem types in the Czech Republic over several years, we recorded the highest carbon sequestration potential in an evergreen Norway spruce forest (100%) and an agroecosystem (65%), followed by European beech forest (25%) and a wetland ecosystem (20%). Because of a massive ecosystem respiration, the final carbon gain of the grassland was negative. Climate was shown to be an important factor of carbon uptake by ecosystems: by varying the growing season length (a 22-d longer season in 2005 than in 2007 increased carbon sink by 13%) or by the effect of short- term synoptic situations (e.g. summer hot and dry days reduced net carbon storage by 58% relative to hot and wet days). Carbon uptake is strongly affected by the ontogeny and a production strategy which is demonstrated by the comparison of seasonal course of carbon uptake between coniferous (Norway spruce) and deciduous (European beech) stands.     

1D and 2D absorption-rate/kinetic modeling and simulation of carbon dioxide absorption into mixed aqueous solutions of MDEA and PZ in a laminar jet apparatus

The kinetics of the reaction between carbon dioxide (CO₂) and mixed solutions of methyldiethanolamine (MDEA) and piperazine (PZ) was investigated experimentally in a laminar jet apparatus. The experimental kinetic data were obtained under no interfacial turbulence and over a temperature range from 313 to 333 K, MDEA/PZ wt% concentration ratios of 27/3, 24/6 and 21/9, and CO₂ loadings from 0.0095 to 0.33 mol CO₂/mol amine. In addition, a new absorption-rate/kinetics model for the kinetics of the mixed of solvents was developed, which takes into account the coupling between chemical equilibrium, mass transfer, and all possible chemical reactions involved in the CO₂ reaction with MDEA/PZ solvent. The partial differential equations of this model were solved by the finite element numerical method (FEM) based on COMSOL software. The obtained experimental kinetics data were used to obtain the kinetic parameters of CO₂ absorption into MDEA/PZ solutions. The reaction-rate constant obtained for PZ blended with MDEA was kPZ = 2.572 × 10¹² exp(?5211/T). The 2D model for the blended amines MDEA/PZ has revealed the concentration profiles of all the species in both the radial and axial directions of the laminar jet which has enabled a better understanding of the correct sequence in which the reaction steps involved in the reactive absorption of CO₂ in aqueous mixed MDEA/PZ solution occur. It also revealed that PZ may be depleted by the time the solvent blend of MDEA/PZ with a loading greater than 0.015 mol/mol amine is exposed to CO₂ from the top of the laminar jet absorber.