Integration of post-combustion capture and storage into a pulverized coal-fired power plant

Post-combustion CO₂ capture and storage (CCS) presents a promising strategy to capture, compress, transport and store CO₂ from a high volume–low pressure flue gas stream emitted from a fossil fuel-fired power plant. This work undertakes the simulation of CO₂ capture and compression integration into an 800 MW_e supercritical coal-fired power plant using chemical process simulators. The focus is not only on the simulation of full load of flue gas stream into the CO₂ capture and compression, but also, on the impact of a partial load. The result reveals that the energy penalty of a low capture efficiency, for example, at 50% capture efficiency with 10% flue gas load is higher than for 90% flue gas load at the equivalent capture efficiency by about 440 kWh_e/tonne CO₂. The study also addresses the effect of CO₂ capture performance by different coal ranks. It is found that lignite pulverized coal (PC)-fired power plant has a higher energy requirement than subbituminous and bituminous PC-fired power plants by 40.1 and 98.6 MW_e, respectively. In addition to the investigation of energy requirement, other significant parameters including energy penalty, plant efficiency, amine flow rate and extracted steam flow rate, are also presented. The study reveals that operating at partial load, for example at half load with 90% CO₂ capture efficiency, as compared with full load, reduces the energy penalty, plant efficiency drop, amine flow rate and extracted steam flow rate by 9.9%, 24.4%, 50.0% and 49.9%, respectively. In addition, the effect of steam extracted from different locations from a series of steam turbine with the objective to achieve the lowest possible energy penalty is evaluated. The simulation shows that a low extracted steam pressure from a series of steam turbines, for example at 300 kPa, minimizes the energy penalty by up to 25.3%.     

Organochlorines, brominated flame retardants and mercury levels in six seabird species from the Gulf of St. Lawrence (Canada): Relationships with feeding ecology, migration and molt

Concentrations of organochlorines (OCs), brominated flame retardants (BFRs) and mercury (Hg) were measured in eggs of six seabird species breeding in the Gulf of St. Lawrence, Canada. Stable nitrogen (δ¹⁵N) and carbon (δ¹³C) isotopes were used as ecological tracers to measure trophic level and connectivity with benthos, respectively. Concentrations, patterns as well as ecological tracers varied significantly between species. The sum of polychlorinated biphenyls (ΣPCBs) was the most important group measured in all seabird species based on concentration followed generally by the sum of chlorinated pesticides (ΣCPs), the sum of brominated flame retardants (ΣBFRs) and finally total Hg (THg). ΣPCBs, ΣCPs and ΣBFRs increased with trophic level, whereas THg did not. Only ΣBFRs increased with a higher connectivity with the benthos. Seabird species resident to the Great Lakes-St. Lawrence ecosystem showed higher Hg and BFR levels than migratory species. Molt patterns were used to explain variations of contaminant levels.     

Impact of combining chlorine dioxide and chlorine on DBP formation in simulated indoor swimming pools

The main objective of this study was to assess the combined use of chlorine dioxide (ClO2) and chlorine (Cl2) on the speciation and kinetics of disinfection by-product (DBP) formation in swimming pools using synthetic pool waters prepared with a body fluid analog (BFA) and/or fresh natural water. At 1:25 (mass ratio) of ClO2 to Cl2, there was no significant reduction in the formation of trihalomethanes (THMs) and haloacetic acids (HAAs) for both BFA solution and natural water compared to the application of Cl2 alone. When the mass ratio of ClO2 to Cl2 increased to 1:1, substantial decreases in both THMs and HAAs were observed in the natural water, while there was almost no change of DBP formations in the BFA solution. Haloacetonitriles and halonitromethanes levels in both water matrices remained similar. In the presence of bromide, the overall DBP formation increased in both BFA solution and natural water. For the DBP formation kinetics, after 72 hr of contact time, very low formation of THMs and HAAs was observed for the use of ClO2 only. Compared to Cl2 control, however, applying the 1:1 mixture of ClO2/Cl2 reduced THMs by > 60% and HAAs by > 50%. Chlorite was maintained below 1.0 mg/L, while the formation of chlorate significantly increased over the reaction time. Finally, in a bench-scale indoor pool experiment, applying ClO2 and Cl2 simultaneously produced less THMs compared to Cl2 control and kept chlorite at < 0.4 mg/L, while HAAs and chlorate accumulated over 4-week operation period.     

Sequential extraction of cadmium in different soil phases and plant parts from a former industrialized area

Cd concentrations in mobile phases of soil are more representative than total Cd concentration for estimating Cd bioavailability, physicochemical reactivity and mobility. In this study, selective sequential extraction procedures were used to determine Cd in different soil phases. Soil samples and plants grown in these soils were collected from a serpentine and copper-mining area in Maden-Elazig-Turkey. The extracted fractions were exchangeable/carbonate, reducible-iron/manganese oxides, oxidizable-organic matter and sulfides, and residual phases except silicates. Concentrations of Cd in soils and plant samples were determined by flame atomic absorption spectrometry and inductively coupled plasma-mass spectrometry. We found that Cd concentrations in the EDTA and NH₂OH·HCl extracts are higher in most soil samples compared to the other extracts. We conclude that Cd levels in mobile phases are unexpectedly high. The observed Cd concentrations are in ranges of 0.03–3.4 mg kg⁻¹ for soil and 0.02–2.5 mg kg⁻¹ for plant parts. The percentages of cadmium up to 56% in exchangeable and carbonates fractions were observed to be significantly higher than in those values less than 2% reported in literature. This study has shown that the modified extraction method can be usefully applied to determine Cd concentrations in potentially mobile phase of soil. Furthermore, it was concluded that Brassicasea and Rumex leaves can be used as hyperaccumulator plants because their translocation factor and/or enrichment coefficient values were found to be higher than 1.0.     

The role of positive affectivity in team effectiveness during crises

Organizational efforts to improve team effectiveness in crisis situations primarily have focused on team training initiatives and, to a lesser degree, on staffing teams with respect to members' ability, experience, and functional backgrounds. Largely neglected in these efforts is the emotional component of crises and, correspondingly, the notion of staffing teams with consideration for their affective makeup. To address this void, we examined the impact of team member dispositional positive affect (PA) on team crisis effectiveness and the role of felt negative emotion in transmitting that influence. A study of 21 nuclear power plant crews engaged in crisis training simulations revealed that homogeneity in PA, but not mean‐level PA, was associated with greater team effectiveness. Mediation analysis suggested that homogeneity in PA leads to greater team effectiveness by reducing the amount of negative emotions that team members experience during crises. Furthermore, homogeneity in PA compensated for lower mean‐level PA in predicting effectiveness. Discussion focuses on the implications of these findings for understanding and further exploring the importance of affective factors and especially team affective composition in team crisis performance. Copyright © 2012 John Wiley & Sons, Ltd.     

Identifying Reference Conditions and Quantifying Biological Variability Within Benthic Macroinvertebrate Communities in Perennial and Non-perennial Northern California Streams

Identification of minimally disturbed reference sites is a critical step in developing precise and informative ecological indicators. We tested procedures to select reference sites, and quantified natural variation (inter-site and -annual variability) among reference conditions using a macroinvertebrate data set collected from 429 mediterranean-climate stream reaches in the San Francisco Bay Area, California (USA). We determined that a landscape GIS-based stressor screen followed by a local field-based stressor screen effectively identified least-disturbed reference sites that, based on NMS ordination results, supported different biological communities than sites identified with only landscape (GIS) or local (field) stressors. An examination of least-disturbed reference sites indicated that inter-site variability was strongly associated with stream hydrology (i.e., perennial vs. non-perennial flow) and annual precipitation, which highlights the need to control for such variation when developing biological indicators through natural gradient modeling or using unique biological indicators for both non-perennial and perennial streams. Metrics were more variable among non-perennial streams, indicating that additional modeling may be needed to develop precise biological indicators for non-perennial streams. Among 192 sites sampled two to six times over the 8-year study period, the biological community showed moderate inter-annual variability, with the 100 point index of biotic integrity scores varying from 0 to 51 points (mean = 11.5). Variance components analysis indicated that inter-annual variability explained only a fraction (5–18 %) of the total variation when compared against site-level variation; thus efforts to understand causes of natural variation between sites will produce more precise and accurate biological indicators.     

Managing Forests for Increased Regional Water Yield in the Southeastern U.S. Coastal Plain

With growing populations fueling increased groundwater abstraction and forecasts of greater water scarcity in the southeastern United States, identifying land management strategies that enhance water availability will be vital to maintaining hydrologic resources and protecting natural systems. Management of forested uplands for lower basal area, currently a priority for habitat improvement on public lands, may also increase water yield through decreased evapotranspiration (ET). To explore this hypothesis, we synthesized studies of precipitation and ET in coastal plain pine stands to develop a statistical model of water yield as a function of management strategy, stand structure, and ecosystem water use. This model allowed us to estimate changes in water yield in response to varying management strategies across spatial scales from the individual stand to a regional watershed. Results suggest that slash pine stands managed at lower basal areas can have up to 64% more cumulative water yield over a 25‐year rotation compared to systems managed for high‐density timber production, with the greatest increases in stands also managed for recurrent understory fire. Although there are important uncertainties in the magnitude of additional water yield and its final destination (i.e., surface water bodies vs. groundwater), this analysis highlights the potential for management activities on public and private timber lands to partially offset increasing demand on surface and groundwater resources.