Trimethylamine abatement in algal-bacterial photobioreactors

Trimethylamine (TMA) is an odorous volatile organic compound emitted by industries. Algal-based biotechnologies have been proven as a feasible alternative for wastewater treatment, although their application to abate polluted air emissions is still scarce. This work comparatively assessed the removal of TMA in a conventional bacterial bubble column bioreactor (BC) and a novel algal-bacterial bubble column photobioreactor (PBC). The PBC exhibited a superior TMA abatement performance compared to the conventional BC. In this sense, the BC reached a removal efficiency (RE) and an elimination capacity (EC) of 78% and 12.1 g TMA m^?3 h^?1, respectively, while the PBC achieved a RE of 97% and a EC of 16.0 g TMA m^?3·h^?1 at an empty bed residence time (EBRT) of 2 min and a TMA concentration ~500 mg m^?3. The outstanding performance of the PBC allowed to reduce the operating EBRT to 1.5 and 1 min while maintaining high REs of 98 and 94% and ECs of 21.2 and 28.1 g m^?3·h^?1, respectively. Moreover, the PBC improved the quality of the gas and liquid effluents discharged, showing a net CO₂ consumption and decreasing by ~ 30% the total nitrogen concentration in the liquid effluent via biomass assimilation. A high specialization of the bacterial community was observed in the PBC, Mumia and Aquamicrobium sp. being the most abundant genus within the main phyla identified.

GraphicalAbstract

     

Evaluation of Cyto- and Genotoxicity of Poly(lactide-co-glycolide) Nanoparticles

This work reports on an analysis of the cyto- and genotoxicity of poly(lactide-co-glycolide) polymer nanoparticles, in an attempt to evaluate their mutagenic effects. Fibroblast (3T3) and human lymphocyte cell cultures were exposed to solutions containing three different concentrations of nanoparticles (5.4, 54 and 540 μg/mL, polymer mass/volume of solution). The nanoparticles were characterized in terms of their hydrodynamic diameters, zeta potentials and polydispersity indices. The morphology of the particles was determined by atomic force microscopy. The PLGA nanospheres presented a size of 95 nm, a zeta potential of −20 mV and a spherical morphology. Cellular viability assays using fibroblast cells showed no significant alterations compared with the negative control. A cytogenetic analysis of human lymphocyte cells showed no significant changes in the mitotic index in relation to the control, indicating that in the concentration range tested, the particles used in the experimental models did not present cyto- or genotoxicity. For the tests conducted in this work we can conclude that biodegradable and biocompatible PLGA nanospheres are not toxic in the cell cultures tested (fibroblast and lymphocyte cells) and in the range of concentrations employed. The results provide new information concerning the toxic effects of particles produced using PLGA.     

Coarse and fine aerosol source apportionment in Rio de Janeiro,Brazil

The metropolitan area of Rio de Janeiro is one of the twenty biggest urban agglomerations in the world, with 11 million inhabitants in the metropolitan area, and has a high population density, with 1700 hab. km^?2. For this aerosol source apportionment study, the atmospheric aerosol sampling was performed at ten sites distributed in different locations of the metropolitan area from September/2003 to December/2005, with sampling during 24 h on a weekly basis. Stacked filter units (SFU) were used to collect fine and coarse aerosol particles with a flow rate of 17 L min^?1. In both size fractions trace elements were analyzed by Inductively Coupled Plasma-Mass Spectrometry (ICP-MS) as well as water-soluble species by Ion-Chromatography (IC). Also gravimetric analysis and reflectance measurements provided aerosol mass and black carbon concentrations. Very good detection limits for up to 42 species were obtained. Mean annual PM₁₀ mass concentration ranged from 20 to 37 μg m^?3, values that are within the Brazilian air quality standards. Receptor models such as principal factor analysis, cluster analysis and absolute principal factor analysis were applied in order to identify and quantify the aerosol sources. For fine and coarse modes, circa of 100% of the measured mass was quantitatively apportioned to relatively few identified aerosol sources. A very similar and consistent source apportionment was obtained for both fine and coarse modes for all 10 sampling sites. Soil dust is an important component, accounting for 22–72% and for 25–48% of the coarse and fine mass respectively. On the other hand, anthropogenic sources as vehicle traffic and oil combustion represent a relatively high contribution (52–75%) of the fine aerosol mass. The joint use of ICP-MS and IC analysis of species in aerosols has proven to be reliable and feasible for the analysis of large amount of samples, and the coupling with receptor models provided an excellent method for quantitative aerosol source apportionment in large urban areas.     

Micronucleus and different nuclear abnormalities in wild birds in the Cerrado,Brazil

Environmental Science and Pollution Research - Free-living birds play an important role as bioindicators in natural environments. In this study, we used the micronucleus test and nuclear...     

The solitary median maxillary central incisor (SMMCI) syndrome: Associations,prenatal diagnosis,and outcomes

Solitary median maxillary central incisor (SMMCI) syndrome is a complex disorder consisting of multiple, developmental defects involving midline structures of the head, which includes the cranial bones, the maxilla, and its container dentition (specifically the central incisor tooth germ), together with other midline structures of the body. SMMCI may appear as an isolated trait or in association with other midline developmental anomalies. We describe the case of a patient with SMMCI. He presented with a solitary median maxillary incisor, short stature, corpus callosum anomalies and a microform of holoprosencephaly (HPE), diabetes insipidus, and neurodevelopmental delay. The diagnosis was performed postnatally based on clinical features, radiological imaging, and a comprehensive genetic study. SMMCI can be diagnosed during the prenatal or neonatal periods or during infancy. Evaluation of the superior maxillary bone is important for prenatal diagnosis. Direct evaluation through bidimensional ultrasound or the use of multiplanar ultrasound or tridimensional reconstruction should be performed in cases of brain or face malformations. Early diagnosis can contribute to improved prenatal assessment and postnatal management.     

Chemical and toxicological evaluation along with unprecedented transformation products during photolysis and heterogeneous photocatalysis of chloramphenicol in different aqueous matrices

Environmental Science and Pollution Research - As the presence of antibiotics in environmental waters enhances antimicrobial resistance, photolysis and heterogeneous photocatalysis of...