Phytoremediation and sequestration of soil metals using the CRISPR/Cas9 technology to modify plants: a review

Environmental Chemistry Letters - Soil contamination by toxic metals is a major health issue that could be partly solved by using genetically-modified plants. For that, the recently developed...     

Investigation on the Influence of EVA Content on the Mechanical and Thermal Characteristics of Poly(lactic acid) Blends

Poly(lactic acid) (PLA) has gained considerable attention nowadays as a biocompatible polymer owing to its advantage of being prepared from renewable resources. PLA exhibits excellent tensile strength, fabricability, thermal plasticity and biocompatibility properties comparable to many petroleum based plastics. However, low heat distortion temperature, brittleness and slow crystallization rate limit the practical applications of PLA. In order to address these limitations, an attempt has been made in the current work to prepare binary blends of PLA with ethylene vinyl acetate (EVA) at different compositions via melt mixing technique. Systematic investigation on the mechanical properties, thermal degradation and crystallization behavior for PLA-EVA blends was carried out. The impact strength of binary blends of PLA–EVA was found to increase significantly by 176% for 15 wt% of EVA compared to virgin PLA. This is due to the strong interfacial adhesion among PLA and EVA resulting in brittle to ductile transition. Scanning electron microscopy analysis for impact fractured surfaces of binary blends of PLA implied the toughening effect of PLA by EVA. Thermogravimetry analysis results revealed that the activation energy of PLA–EVA blends decreased with increase in EVA content in the PLA matrix. While, differential scanning calorimetry results obtained for PLA–EVA blends revealed the improvement in crystallinity when compared with neat PLA. The effect of EVA on non-isothermal melt crystallization kinetics of PLA was also examined via DSC at various heating rates. Decreasing trend in the t_1/2 values indicated the faster rate of crystallization mechanism after addition of EVA in the PLA matrix.     

Emissions analysis on second generation biodiesel

This work investigates the effect of adding pentanol with biodiesel derived from cashew nut shell on its emissions characteristics is conducted in stationery diesel engine. The main purpose of this work is intended to reduce the emissions by fuelling biodiesel derived from cashew nut shell and the pentanol blends. Cashew nut shell biodiesel is prepared by transesterification process. Oxygenated additive used in the work is Pentanol. The experiment is conducted using four test fuels such as, biodiesel derived from cashew nut shell (CNSBD), a fuel containing 90% cashew nut shell biodiesel and 10% pentanol (CNSBD90P10), a fuel containing 80% cashew nut shell biodiesel and 20% pentanol (CNSBD80P20) and neat diesel. Experimental work concluded that by adding 10% of pentanol to cashew nut shell biodiesel 10.1%, 2.6%, 5.1%and 2.1%reduction in CO, HC, NO _x and Smoke emissions were observed respectively. Further by fueling with these blends, no modifications in engines were required.

Open image in new window

     

Tool for assessment of process importance at the groundwater/surface water interface

The groundwater/surface water interface (GWSWI) represents an important transition zone between groundwater and surface water environments that potentially changes the nature and flux of contaminants exchanged between the two systems. Identifying dominant and rate-limiting contaminant transformation processes is critically important for estimating contaminant fluxes and compositional changes across the GWSWI. A new, user-friendly, spreadsheet- and Visual Basic-based analytical screening tool that assists in evaluating the dominance of controlling kinetic processes across the GWSWI is presented. Based on contaminant properties, first-order processes that may play a significant role in solute transport/transformation are evaluated in terms of a ratio of process importance (P_i) that relates the process rate to the rate of fluid transfer. Besides possessing several useful compilations of contaminant and process data, the screening tool also includes 1-D analytical models that assist users in evaluating contaminant transport across the GWSWI. The tool currently applies to 29 organics and 10 inorganics of interest within the context of the GWSWI. Application of the new screening tool is demonstrated through an evaluation of natural attenuation at a site with trichloroethylene and 1,1,2,2-tetrachloroethane contaminated groundwater discharging into wetlands.     

Identification of sources affecting fog formation using receptor modeling approaches and inventory estimates of sectoral emissions

Positive matrix factorization (PMF) was used to identify factors affecting fog formation in Kanpur during the ISRO-GBP land campaign-II (LC-II) in December 2004. PMF predicted factors were validated by contrasting the emission strength of sources in the foggy and clear periods, using a combination of potential source contribution function (PSCF) analysis and quantitative emission inventory information. A time series aerosol chemical data set of 29 days and 12 species was decomposed to identify 4-factors: Secondary species, Biomass burning, Dust and Sea salt. PMF predicted particle mass with a satisfactory goodness-of-fit (slope of 0.83 ± 0.17 and R² of 0.8), and strong species within 11–12% relative standard deviation. Mean contributions of anthropogenic factors were significantly higher during the foggy period for secondary species (2.9 ± 0.3) and biomass burning (1.2 ± 0.09) compared to the clear period. Local sources contributing to aerosols that mediated fog events at Kanpur, based on emissions in a 200 km × 200 km area around Kanpur city were thermal power plants and transportation (SO₂) and biofuel combustion (BC and OM). Regional scale sources influencing emissions during the foggy period, in probable source regions identified by PSCF included thermal power plants, transportation, brick kilns and biofuel combustion. While biofuel combustion and transportation are distributed area sources, individual point sources include coal-fired thermal power plants located in Aligarh, Delhi, Ghaziabad, Jhansi, Kanpur, Rae Bareli and Rupnagar and brick kilns located in Allahabad, Agra, Farrukhabad, Ghaziabad, Kanpur, Ludhiana, Lucknow and Rae Bareli. Additionally, in the foggy period, large areas of probable source regions lay outside India, implying the significance of aerosol incursion from outside India.     

California's Low‐Threat LUFT Site Closure Policy: Looking Forward

California's regulatory agencies have historically been at the forefront of national efforts to address environmental concerns. In 2012, California's agency for addressing leaking underground fuel tanks (LUFTs) adopted a policy that identifies low‐threat conditions warranting closure of an LUFT case. That development clearly fulfills the role of risk management in the risk assessment–risk management paradigm inherent in environmental remediation. It also encourages identification of additional categories of sites and other circumstances that are “low threat” to develop similar guidance on closure to apply to those sites. ©2015 Wiley Periodicals, Inc.     

Comparison of in vivo and in vitro methodologies for the assessment of arsenic bioavailability in contaminated soils

An in vivo swine assay was utilised for the determination of arsenic (As) bioavailability in contaminated soils. Arsenic bioavailability was assessed using pharmacokinetic analysis encompassing area under the blood plasma-As concentration time curve following zero correction and dose normalisation. In contaminated soil studies, As uptake into systemic circulation was compared to an arsenate oral dose and expressed as relative As bioavailability. Arsenic bioavailability ranged from 6.9+/-5.0% to 74.7+/-11.2% in 12 contaminated soils collected from former railway corridors, dip sites, mine sites and naturally elevated gossan soils. Arsenic bioavailability was generally low in the gossan soils and highest in the railway soils, ranging from 12.1+/-8.5% to 16.4+/-9.1% and 11.2+/-4.7% to 74.7+/-11.2%, respectively. Comparison of in vivo and in vitro (Simplified Bioaccessibility Extraction Test [SBET]) data from the 12 contaminated soils and bioavailability data collected from an As spiked soil study demonstrated that As bioavailability and As bioaccessibility were linearly correlated (in vivo As bioavailability (mgkg(-1))=14.19+0.93.SBET As bioaccessibility (mgkg(-1)); r(2)=0.92). The correlation between the two methods indicates that As bioavailability (in vivo) may be estimated using the less expensive, rapid in vitro chemical extraction method (SBET) to predict As exposure in human health risk assessment.     

Hepatic and immune biological effect assays in C57BL/6 mice to measure polycyclic aromatic hydrocarbon bioavailability under laboratory exposures with increasing environmental relevance

Background Monitoring biological responses that are mediated via the aryl-hydrocarbon receptor (AhR) in animals exposed to environmental contaminants can indicate both the presence to chemicals that act through this biochemical pathway and whether these chemicals are bioavailable. Objectives The use of an ex-situ method that incorporated biological responsiveness monitoring in mice for determining the presence of ‘biologically active’ hydrocarbons in contaminated soils was investigated. Methods The use of C57BL/6 as a test organism was validated by determining hepatic and immune responsiveness to two polyaromatic hydrocarbons (PAHs): 3,4 benz[a]pyrene (B[a]P) and 1,2 benz (a)anthracene (BA) administered via intraperitoneal (i.p.) injection. The responsiveness of mice exposed to soils spiked with hydrocarbons or ex situ exposures to soil removed from two contaminated sites was also investigated. Results and Discussion Mice that were exposed to B[a]P via i.p. injections showed a 14-fold increase in liver microsomal ethoxyresorufin O-deethylase (EROD) activity compared to the control group. In contrast EROD activity following BA exposure at the same level was not significantly enhanced. Mouse immune response was significantly inhibited in a dose-dependent manner by i.p. injections of B[a]P. No significant inhibition occurred with the same doses of BA. Following i.p. exposure, the retention of B[a]P in mouse carcasses was greater than BA. Mice exposed to clean soils spiked with environmentally relevant concentrations of B[a]P and BA failed to show any significantly different hepatic or immune responses. Carcass residue data indicated a limited uptake of PAH from the soil. In contrast, EROD activity in mice exposed (ex situ) to hydrocarbon-contaminated soils removed from a fuel-loading depot and decommissioned gas works was significantly enhanced (4- and 2-fold respectively). However, this increase in EROD activity did not appear to correlate with either soil or carcass PAH concentrations. Conclusions and Outlook These results support the assumption that B[a]P has a higher affinity for the aryl hydrocarbon receptor (AhR) compared to BA. Soil parameters such as organic carbon content, structure and particle size distribution can modulate the bioavailability of contaminants to biological receptors. These factors are implicated in the lack of responsiveness demonstrated in the spiked soil experiments. However the responsiveness of EROD activity in mice exposed (ex situ) to soil contaminated with complex mixtures of hydrocarbon compounds confirms the potential usefulness of this model to determine the presence of ‘biologically active’ compounds in aged soils removed from contaminated sites.     

A comprehensive study on water balance, sedimentation and physico-chemical characteristics of Sagar Lake in India

In this study, an attempt has been made to work out water balance, determine rate of sedimentation and physico-chemical analysis of the lake water. The water balance is carried out using the mass balance equation to account for various input and output components. Sedimentation rates and pattern are estimated using (137)Cs and (210)Pb radiometric dating techniques. The physico-chemical analysis of the lake water is done by collecting samples from twelve locations of the lake at three different depths. The major inflow to the lake is catchment runoff, which accounts for nearly 56% of the total annual inflow and about 98% inflow takes place during monsoon period. The major outflow from the lake is weir overflow, which occurs in monsoon season only and accounts for about 85% of the total annual outflow. The estimated mean sedimentation rate in the lake is 0.58 +/- 0.028 cm/year. The estimated useful life of the lake based on post-1964 (appearance of the major peak of (137)Cs due to weapon fallout record pattern) average sedimentation rate is around 467 +/- 23 years. The lake has attained the hyper-eutrophic state due to high nitrogen and phosphorous contents in the lake water. Based on the trophic state index (TSI), the lake has become unsuitable for drinking, bathing and even for fish culture.     

Geopolymer concrete with metakaolin for sustainability: a comprehensive review on raw material’s properties,synthesis, performance,and potential application

Environmental Science and Pollution Research - In the last three decades, the gigantic demand for sustainable and environmentally friendly concrete with reduced environmental footprints has...