Concomitant rock phosphate dissolution and lead immobilization by phosphate solubilizing bacteria (Enterobacter sp.)

This paper examines the potential value of phosphate solubilizing bacteria (Enterobacter cloacae) in the dissolution of rock phosphate (RP) and subsequent immobilization of lead (Pb) in both bacterial growth medium and soils. Enterobacter sp. showed resistance to Pb and the bacterium solubilized 17.5% of RP in the growth medium. Enterobacter sp. did not enhance Pb immobilization in solution because of acidification of bacterial medium, thereby inhibiting the formation of P-induced Pb precipitation. However, in the case of soil, Enterobacter sp. increased Pb immobilization by 6.98, 25.6 and 32.0% with the RP level of 200, 800 and 1600 mg P/kg, respectively. The immobilization of Pb in Pb-spiked soils was attributed to pyromorphite formation as indicated by XRD analysis. Inoculation of phosphate solubilizing bacteria with RP in soil can be used as an alternative technique to soluble P compounds which can cause eutrophication of surface water.     

Degradation of synthetic dyes using nanoparticles: a mini-review

Environmental Science and Pollution Research - The industrial revolution has marked a strong impact on financial upgradation of several countries, and increase in the industrial establishment...     

微生物隔膜在生物阴极MFC中的应用及效能评价

本文构建了2.0L具有微生物隔膜的模块化生物阴极微生物燃料电池（MFC）,以实际生活污水为底物,在连续流运行模式中,系统考察了微生物隔膜（MS）在MFC长期运行过程中的功能特征.结果表明：发育成熟的微生物隔膜可以稳定维持MFC阴阳极室间的溶解氧（DO）浓度梯度,使阳极室平均DO浓度低于0.5mg/L,同时使完全混合的阴极室COD浓度低于50mg/L,避免了电解液性质对于电极反应的抑制.微生物隔膜可以实现离子的跨隔膜迁移,进而平衡阴阳极室间的pH值;阴阳极室间存在的跨隔膜离子梯度意味着微生物隔膜完全分隔了两极室内不同的微生物代谢类型,阴极快速的好氧代谢可能导致了阴极室离子强度的降低.微生物隔膜对于MFC中COD和DO梯度的保持以及pH值的平衡起到了决定性作用,这将严格保证MFC的正常运行.同时,本文论述了在面向规模化应用的MFC中装配微生物隔膜的巨大技术与经济优势,综合评价了微生物隔膜的效能特征,为进一步推广面向实际废水处理的微生物电化学设备提供了技术支撑.     

Applying the baldrige quality criteria to environmental performance: Lessons from leading organizations

Over the last thirty years, we have seen a dramatic shift in values that people and corporations place on environmental responsibility. People have become more aware of how the earth's limited resources are being rapidly depleted. High levels of consumption have resulted in increasing manufacturing and transportation needs which in turn lead to greater energy use, higher usage of hazardous and toxic substances, and decreased air and water quality. Leadership for environmental protection has shifted from vocal environmental advocacy groups to corporate executives. Driven by shifting customer requirements, competitive pressures, and resource conservation technologies, environmental issues are becoming embedded in the fundamental business strategies. In this article we will describe the application of the Malcolm Baldrige quality award criteria to environmental management and show how the focus on quality principles and tools can improve profitability. Examples from the Xerox Corporation and other companies will be provided to illustrate the breadth of environmental improvement initiatives that are being implemented.     

Traditional knowledge and biodiversity conservation: a case study from Byans Valley in Kailash Sacred Landscape,India

Ethnobotanical knowledge plays a significant role in plant diversity conservation and the curing of various ailments in remote rural areas of the Indian Himalayan Region (IHR). A total of 53 plant species from 27 families have been documented from the Byans valley and are used traditionally for the treatment of various diseases. Valley inhabitants have maintained a symbiotic relationship between natural resources and their cultural belief system by developing sacred forests/groves which conserve the region's plant diversity pool. Information on sacred natural sites and traditional beliefs was documented in order to understand the environmental and conservationist implications of these rules and practices. The study provides comprehensive information about eroding traditional knowledge and biodiversity conservation practices. This study could be a pilot to strengthen the conservation practices and sustainable utilization of frequently used bioresources by understanding the traditional knowledge system and conservation ethics of tribal communities in the Himalayan region.     

Hermetic joining of 316L stainless steel using a patterned nickel nanoparticle interlayer

This paper evaluates the use of a nickel nanoparticle (NiNP) interlayer for making hermetic joints in 316L stainless steel substrates via diffusion brazing. Different NiNP inks were prepared using commercial nanopowder (～9 nm) and in-house synthesized nanoparticles. Syringe pump deposition of ～9 nm NiNP ink and diffusion brazing at 900 °C for 30 min under 2 MPa resulted in a hermetic joint up to the tested pressure of 70 psi. In-house synthesis of NiNPs was carried out in ethylene glycol by the reduction of NiCl₂·6H₂O in the presence of hydrazine (N₂H₄) as a reducing agent. X-ray diffraction (XRD) analysis and transmission electron microscopy (TEM) results confirm the presence of pure fcc-Ni with an average particle size of 5.4 ± 0.9 nm. An as-synthesized suspension of NiNPs was patterned onto 316L stainless steel laminae via automated dispensing to a thickness of ～3 μm and bonded at 800 °C for 30 min at a pressure of 2 MPa. The diffusion-brazed test article was also found to be hermetic up to 70 psi. An examination of the bond line using scanning electron microscopy (SEM) showed good uniformity and continuity.     

Decomposition effects on the mass burning rate of organic peroxide pool fires

The mass burning rate of pool fires of organic peroxides do not vary appreciably with the pool size as have been observed for the hydrocarbons. Instead the decomposition temperature largely controls the same. The dependence of mass burning rate on the decomposition temperatures namely self-accelerating decomposition temperature (SADT) and extrapolated onset temperature measured by differential scanning calorimetry (DSC) for organic peroxide pool fires are identified and correlations are developed.     

Electronic waste management approaches: An overview

Electronic waste (e-waste) is one of the fastest-growing pollution problems worldwide given the presence if a variety of toxic substances which can contaminate the environment and threaten human health, if disposal protocols are not meticulously managed. This paper presents an overview of toxic substances present in e-waste, their potential environmental and human health impacts together with management strategies currently being used in certain countries. Several tools including Life Cycle Assessment (LCA), Material Flow Analysis (MFA), Multi Criteria Analysis (MCA) and Extended Producer Responsibility (EPR) have been developed to manage e-wastes especially in developed countries. The key to success in terms of e-waste management is to develop eco-design devices, properly collect e-waste, recover and recycle material by safe methods, dispose of e-waste by suitable techniques, forbid the transfer of used electronic devices to developing countries, and raise awareness of the impact of e-waste. No single tool is adequate but together they can complement each other to solve this issue. A national scheme such as EPR is a good policy in solving the growing e-waste problems.     

Pilot-scale study of the effect of selective catalytic reduction catalyst on mercury speciation in Illinois and Powder River Basin coal combustion flue gases

A study was conducted to investigate the effect of selective catalytic reduction (SCR) catalyst on mercury (Hg) speciation in bituminous and subbituminous coal combustion flue gases. Three different Illinois Basin bituminous coals (from high to low sulfur [S] and chlorine [Cl]) and one Powder River Basin (PRB) subbituminous coal with very low S and very low Cl were tested in a pilot-scale combustor equipped with an SCR reactor for controlling nitrogen oxides (NOx) emissions. The SCR catalyst induced high oxidation of elemental Hg (Hg0), decreasing the percentage of Hg0 at the outlet of the SCR to values <12% for the three Illinois coal tests. The PRB coal test indicated a low oxidation of Hg0 by the SCR catalyst, with the percentage of Hg0 decreasing from approximately 96% at the inlet of the reactor to approximately 80% at the outlet. The low Cl content of the PRB coal and corresponding low level of available flue gas Cl species were believed to be responsible for low SCR Hg oxidation for this coal type. The test results indicated a strong effect of coal type on the extent of Hg oxidation.