Quality assurance for the measurements and monitoring of radioactivity in the environment

During the Fifth Framework Programme (FP5) of the European Commission--according to an institutional programme in support to the policy of the European Commission for the implementation of Art. 35 and 36 of the Euratom Treaty as well as in the framework of the OSPAR Convention for the protection of marine environment of the north-east Atlantic--at the Institute for Transuranium Elements (ITU--General Directorate Joint Research Centre--European Commission), a reference laboratory for the measurement of radioactivity in the environment (MaRE laboratory) has been set up. In this paper, the principles and philosophy in order to improve the quality and reliability of analytical data for the measurement and monitoring of radioactivity in the environment under a quality assurance (QA) programme are presented. Examples of how a QA programme at the MaRE laboratory is developed and applied are given. Internal and external quality control (QC) programmes are also discussed.     

Land Evaluation for Maize Based on Fuzzy Set and Interpolation

The objective of this article is to apply fuzzy set and interpolation techniques for land suitability evaluation for maize in Northern Ghana. Land suitability indices were computed at point observations using the Semantic Import (SI) model, whereas spatial interpolation was carried out by block kriging. Interpolated land suitability shows a high correlation (R2 = 0.87) with observed maize yield at the village level. This indicates that land suitability is closely related to maize yield in the study area. Membership functions were further used to assess the degree of limitation of land characteristics to maize. Sixty percent of the data has membership functions ranging from 0.23 for ECEC to 1.00 for drainage. ECEC, organic C, and clay are the major constraints to maize yield. The use of the fuzzy technique is helpful for land suitability evaluation, especially in applications in which subtle differences in soil quality are of a major interest. Furthermore, the use of kriging that exploits spatial variability of data is useful in producing continuous land suitability maps and in estimating uncertainties associated with predicted land suitability indices.     

Graduated driver licensing and safer driving

Graduated Driver Licensing (GDL) inserts between the leaner permit and full licensure an intermediate or "provisional" license that allows novices to drive unsupervised but subject to provisions intended to reduce the risks that accompany entry into highway traffic. Introduction of GDL has been followed by lowered accident rates, resulting from both limiting exposure of novices to unsafe situations and by helping them to deal with them more safely. Sources of safer driving include extended learning, early intervention, contingent advancement, and multistage instruction. To extend the learning process, most GDL systems lengthen the duration of the learner phase and require a specified level of adult-supervised driving. Results indicate that extended learning can reduce accidents substantially if well structured and highly controlled. Early intervention with novice traffic violators have shown both a general deterrent effect upon novice violators facing suspension and a specific effect upon those who have experienced it. Making advancement to full licensure contingent upon a violation-free record when driving on the provisional license has also evidenced a reduction in accidents and violations during that phase of licensure. Multistage instruction attempts development of advanced skills only after novices have had a chance to master more basic skills. Although this element of GDL has yet to be evaluated, research indicates crash reduction is possible in situations where it does not increase exposure to risk. While the various elements of GDL have demonstrated potential benefit in enhancing the safety of novice drivers, considerable improvement in the nature and enforcement of GDL requirements is needed to realize that potential.     

Modeling flow and nitrate fate at catchment scale in Brittany (France)

In the intensive pig-farming (Sus scrofa) area of Brittany (western France), many surface and subsurface water resources are contaminated by nitrate (NO3) with concentrations that chronically exceed the European Community 50 mg L(-1) drinking standard. To ensure sustainable water supply, the fate of NO3 must be considered in both surface water and ground water. The fate of N was investigated in a Britain catchment, the Co?t-Dan watershed, with an integrated management tool: the hydrological SWAT model coupled with the ground water model MODFLOW, and its companion contaminant and solute transport model MT3DMS. The model was validated with respect to water quantity during a 6-yr period and for the NO3 concentration during a 44-mo period, at two gauging stations in the catchment. The coupled models reproduced accurately the measurements. At the basin outlet, the Nash-Sutcliffe coefficients were 0.88 for monthly flow for the entire period and 0.87 for monthly N load. Alternative scenarios were simulated and showed potential benefits of decreasing manure application from 210 to 170 kg N ha(-1) as required by the European Commission Nitrates Directive.     

Uptake and release of cesium-137 by five plant species as influenced by soil amendments in field experiments

Phytoextraction field experiments were conducted on soil contaminated with 0.39 to 8.7 Bq/g of 137Cs to determine the capacity of five plant species to accumulate 137Cs and the effects of three soil treatments on uptake. The plants tested were redroot pigweed (Amaranthus retroflexus L. var. aureus); a mixture of redroot pigweed and spreading pigweed (A. graecizans L.); purple amaranth (A. cruteus L.) x Powell's amaranth (A. powellii S. Watson), referred to here as the amaranth hybrid; Indian mustard [Brassica juncea (L.) Czern.]; and cabbage (Brassica oleracea L. var. capitata). For control plants, the concentration ratios (CR) of 137Cs were greatest for redroot pigweed and the amaranth hybrid, with average CR values of 1.0 +/- 0.24 and 0.95 +/- 0.14, respectively. The lowest value was for Indian mustard at 0.36 +/- 0.10. The soil treatments included (i) application of NH4NO3 solution to the soil after plants had matured, (ii) addition of composted manure to increase organic matter content of the soil, (iii) combination of the manure and ammonium solution treatments, and (iv) controls. The ammonium solution gave little overall increase in accumulation of 137Cs. The use of composted manure also had little influence, but the combination of the composted manure with application of ammonium solutions had a distinctly negative effect on plant uptake of 137Cs. On average the fraction of 137Cs taken up from the soil was reduced by 57.4 +/- 1.2% compared with controls. This was the result of release of competing ions, primarily Ca, from the manure and was observed across all five plant species tested. The application of ammonium solution took place in the last two weeks before harvest. The reduction of plant 137Cs content, by addition of the ammonium solution, as it interacted with the manure, indicates that substantial quantities 137Cs can be released from the shoots of plants as a result of sudden changes in soil solution chemistry.     

Nitrous oxide emission and denitrification in chronically nitrate-loaded riparian buffer zones

Riparian buffer zones are known to reduce diffuse N pollution of streams by removing and modifying N from agricultural runoff. Denitrification, often identified as the key N removal process, is also considered as a major source of the greenhouse gas nitrous oxide (N2O). The risks of high N2O emissions during nitrate mitigation and the environmental controls of emissions have been examined in relatively few riparian zones and the interactions between controls and emissions are still poorly understood. Our objectives were to assess the rates of N2O emission from riparian buffer zones that receive large loads of nitrate, and to evaluate various factors that are purported to control N emissions. Denitrification, nitrification, and N2O emissions were measured seasonally in grassland and forested buffer zones along first-order streams in The Netherlands. Lateral nitrate loading rates were high, up to 470 g N m(-2) yr(-1). Nitrogen process rates were determined using flux chamber measurements and incubation experiments. Nitrous oxide emissions were found to be significantly higher in the forested (20 kg N ha(-1) yr(-1)) compared with the grassland buffer zone (2-4 kg N ha(-1) yr(-1)), whereas denitrification rates were not significantly different. Higher rates of N2O emissions in the forested buffer zone were associated with higher nitrate concentrations in the ground water. We conclude that N transformation by nitrate-loaded buffer zones results in a significant increase of greenhouse gas emission. Considerable N2O fluxes measured in this study indicate that Intergovernmental Panel on Climate Change methodologies for quantifying indirect N2O emissions have to distinguish between agricultural uplands and riparian buffer zones in landscapes receiving large N inputs.     

Wax perception in honeybees: contact is not necessary

In social insects, much progress has been made in identifying variations in the cuticular signatures of sexes, castes, kin and reproductive status. In contrast to this, we still do not know how the receivers perceive these recognition cues. This study was designed to investigate whether honeybees use contact-chemosensory or olfactory sensilla to perceive wax components. To answer this question in a behavioral assay, we combined classical conditioning of the proboscis extension reaction and a recently established method using zinc sulfate to selectively block antennal contact-chemosensory sensilla. Comparison of the responses to sucrose, wax and geraniol before and after antennal zinc sulfate treatment revealed that the sucrose response is lost after treatment but the responses to wax and geraniol are maintained. As sucrose is perceived by the contact-chemosensory sensilla, the retention of the wax response indicates that contact-chemosensory sensilla are not necessary for wax perception.     

The first commercial supercritical water oxidation sludge processing plant

Final disposal of sludge continues to be one of the more pressing problems for the wastewater treatment industry. Present regulations for municipal sludge have favored beneficial use, primarily in land application. However, several agencies and entities have warned of potential health risks associated with these methods. Hydrothermal oxidation provides an alternative method that addresses the health concerns associated with sludge disposal by completely converting all organic matter in the sludge to carbon dioxide, water, and other innocuous materials. A hydrothermal oxidation system using HydroProcessing, L.L.C.'s HydroSolids process has been installed at Harlingen, Texas to process up to 9.8 dry tons per day of sludge. Based on a literature review, this system is the largest hydrothermal oxidation system in the world, and the only one built specifically to process a sludge. Start up of Unit 1 of two units of the HTO system began in April 2001. Early results have indicated COD conversion rates in excess of 99.9%. Harlingen Waterworks System estimates that the HydroSolids system will cost less than other alternatives such as autothermal thermophilic aerobic digestion and more traditional forms of digestion that still require dewatering and final disposal. The Waterworks intends to generate income from the sale of energy in the form of hot water and the use of carbon dioxide from the HydroSolids process for neutralization of high pH industrial effluent. The Waterworks also expects to generate income from the treatment of septage and grease trap wastes.     

Response of Ceriodaphnia dubia to ionic silver: discrepancies among model predictions, measured concentrations and mortality

Silver thiosulfate, often a waste product of photoprocessing, is less bioavailable or toxic to aquatic organisms than is ionic silver. We conducted duplicate 48-h Ceriodaphnia dubia tests in reconstituted laboratory water using treatments of 92.7 nM Ag+ with various concentrations of thiosulfate. Expected Ag+ concentrations were generated for thiosulfate treatment levels using MINEQL + chemical equilibrium modeling. Ag+ concentrations in treatments were determined using a novel silicon-based sensor. Based on predicted Ag+ and published 48-h LC50 values for C. dubia, we did not expect to observe adverse effects. Yet, 100% mortality was observed at low thiosulfate treatments, whereas > 85% and > 95% survival was observed at higher thiosulfate treatment levels, respectively. Our results indicate that biotic responses match the sensor-based Ag+ concentrations. However, there is a discrepancy between these empirical results and responses expected to occur with Ag+ concentrations as predicted by MINEQL + chemical modeling. By correlating silicon sensor data with toxicity results obtained from our laboratory, our work clearly relates a specific chemical form (Ag+) to toxicity results.     

Methods for collecting time/activity pattern information related to exposure to combustion products

Focus groups, surveys and questionnaires, diaries and observations can be used to gather information about people's exposure to a wide range of combustion products. Information about locations and durations of exposure, and sources of exposure can be obtained with these instruments. The types of instruments used must be fine tuned to meet the design characteristics of the community in which the study will be conducted.