Modeling Air Flow Dynamics in Radon Mitigation Systems: A Simplified Approach

Subslab air flow dynamics provide important diagnostic information for designing optimal radon mitigation systems based on the subslab depressurization technique. In this paper, it is suggested that subslab air flow induced by a central suction point be treated as radial air flow through a porous bed contained between two impermeable disks. Next, we show that subslab air flow is most likely to be turbulent under actual field situations in houses with subslab gravel beds, while remaining laminar when soil is present under the slab. The physical significance of this model is discussed and simplified closedform equations are derived to predict pressure and flows at various distances from a single central depressurization point. A laboratory apparatus was built in order to verify our model and experimentally determine the model coefficients of the pressure drop versus flow for commonly encountered subslab gravel materials. These pressure drop coefficients can be used in conjunction with our simplified model as a rational means of assessing subslab connectivity in actual houses, which is an important aspect of the pre-mitigation diagnostic phase. Preliminary field verification results in a house with gravel under the basement slab are presented and discussed.     

Impact of soil quality on elemental uptake by,and distribution in,Colocasia esculenta (Amadumbe), an edible root

In this study the elemental distribution of selected essential (Ca, Mg, Al, Mn, Cu, Fe, Co, Cr, Zn, Ni and Se) and the non-essential (Pb, Hg and As) elements were determined in the bulb and peel of Amadumbe (Colocasia esculenta) samples from eight different sites in KwaZulu-Natal, South Africa. The concentration of Se and As in the soil and in the Amadumbe bulbs were below the detection limit of 0.09 μg g^?1. The total and bioavailable concentrations of the elements in conjunction with pH, soil organic matter (SOM) and cation exchange capacity (CEC) were determined in the soil samples from the eight sites. Statistical analysis was done to evaluate the impact of soil quality parameters on the chemical composition of the Amadumbe root. The results show accumulation or exclusion of certain elements by the bulb as evidenced by the noticeable increase or decrease of the concentrations of elements, respectively. Ca and Mg were found to be major elements in the range (2000–12000 μg g^?1), whilst Mn, Zn, Fe and Al were found to be minor elements in the range (20–400 μg g^?1). A general trend observed was that the plant favours the absorption of Zn over Cu. A positive correlation between Mg & Ca, Cu & Fe and Co & Ni was also observed. Statistical analysis revealed that the plant tended to accumulate Mg, Ca, Co, Cr and Pb whilst it excluded Hg and Fe, to a lesser extent.     

Adsorption-desorption and leaching of pyraclostrobin in Indian soils

Pyraclostrobin is a new broad-spectrum foliar applied and seed protectant fungicide of the strobilurin group. In this paper, adsorption-desorption of pyraclostrobin has been investigated in three different soils viz. Inceptisol (sandy loam, Delhi), Vertisol (sandy clay, Hyderabad) and Ultisol (sandy clay loam, Thrissur). Effect of organic matter and clay content on sorption was also studied in Inceptisol of Delhi. Leaching potential of pyraclostrobin as influenced by rainfall was studied in intact soil columns to confirm the results of adsorption-desorption studies. The adsorption studies were carried out at initial concentrations of 0.05, 0.1, 0.5, 1 and 1.5 μg mL^?1. The distribution coefficient (K_d) values in three test soils ranged from 4.91 to 18.26 indicating moderate to high adsorption. Among the three test soils, adsorption was the highest in Ultisol (K_d 18.26), followed by Vertisol (K_d 9.87) and Inceptisol (K_d 4.91). K_F value was also highest for Ultisol soil (66.21), followed by Vertisol (40.88) and Inceptisol (8.59). S-type adsorption isotherms were observed in all the three test soils. K_d values in organic carbon-removed soil and clay-removed soil were 3.57 and 2.83 respectively, indicating lower adsorption than normal Inceptisol. Desorption studies were carried out at initial concentrations of 0.5, 1 and 1.5 μg mL^?1. Desorption was the greatest in Inceptisol, followed by Vertisol and Ultisol. Amounts of pyraclostrobin desorbed in three desorption cycles for different concentrations were 23.1–25.3%, 9.4–20.7% and 8.1–13.6% in Inceptisol, Vertisol and Ultisol respectively. Desorption was higher in clay fraction-removed and organic carbonremoved soils than normal Inceptisol. Desorption was slower than adsorption in all the test soils, indicating hysteresis effect (with hysteresis coefficient values varying from 0.05 to 0.20). Low values of hysteresis coefficient suggest high hysteresis effect indicating easy and strong adsorption, and slow desorption, of pyraclostrobin in soils. Higher hysteresis coefficient values in organic carbon removed soil (0.25–0.30) and clay fraction removed soil (0.28–0.36) as compared to normal Inceptisol soil suggest relatively weak adsorption and easy desorption of pyraclostrobin. Results of regression analysis suggest that the organic matter and pH of the soil play a major role in adsorption of pyraclostrobin. Leaching studies were carried out in intact soil columns in Inceptisol. The columns were leached with different amounts of water simulating different amounts of rainfall. The results suggest that most of the pyraclostrobin residues will remain present in the top soil layers even under high rainfall conditions and chances of pyraclostrobin moving to lower soil depth are almost negligible.     

Electrokinetic-enhanced phytoremediation of soils: Status and opportunities

Phytoremediation is a sustainable process in which green plants are used for the removal or elimination of contaminants in soils. Both organic and inorganic contaminants can be removed or degraded by growing plants by several mechanisms, namely phytoaccumulation, phytostabilization, phytodegradation, rhizofiltration and rhizodegradation. Phytoremediation has several advantages: it can be applied in situ over large areas, the cost is low, and the soil does not undergo significant damages. However, the restoration of a contaminated site by phytoremediation requires a long treatment time since the remediation depends on the growth and the biological cycles of the plant. It is only applicable for shallow depths within the reach of the roots, and the remediation efficiency largely depends on the physico-chemical properties of the soil and the bioavailability of the contaminants. The combination of phytoremediation and electrokinetics has been proposed in an attempt to avoid, in part, the limitations of phytoremediation. Basically, the coupled phytoremediation–electrokinetic technology consists of the application of a low intensity electric field to the contaminated soil in the vicinity of growing plants. The electric field may enhance the removal of the contaminants by increasing the bioavailability of the contaminants. Variables that affect the coupled technology are: the use of AC or DC current, voltage level and mode of voltage application (continuous or periodic), soil pH evolution, and the addition of facilitating agents to enhance the mobility and bioavailability of the contaminants. Several technical and practical challenges still remain that must be overcome through future research for successful application of this coupled technology at actual field sites.     

Decadal time-scale monitoring of forest fires in Similipal Biosphere Reserve,India using remote sensing and GIS

Analyzing the spatial extent and distribution of forest fires is essential for sustainable forest resource management. There is no comprehensive data existing on forest fires on a regular basis in Biosphere Reserves of India. The present work have been carried out to locate and estimate the spatial extent of forest burnt areas using Resourcesat-1 data and fire frequency covering decadal fire events (2004–2013) in Similipal Biosphere Reserve. The anomalous quantity of forest burnt area was recorded during 2009 as 1,014.7 km². There was inconsistency in the fire susceptibility across the different vegetation types. The spatial analysis of burnt area shows that an area of 34.2 % of dry deciduous forests, followed by tree savannah, shrub savannah, and grasslands affected by fires in 2013. The analysis based on decadal time scale satellite data reveals that an area of 2,175.9 km² (59.6 % of total vegetation cover) has been affected by varied rate of frequency of forest fires. Fire density pattern indicates low count of burnt area patches in 2013 estimated at 1,017 and high count at 1,916 in 2004. An estimate of fire risk area over a decade identifies 12.2 km² is experiencing an annual fire damage. Summing the fire frequency data across the grids (each 1 km²) indicates 1,211 (26 %) grids are having very high disturbance regimes due to repeated fires in all the 10 years, followed by 711 grids in 9 years and 418 in 8 years and 382 in 7 years. The spatial database offers excellent opportunities to understand the ecological impact of fires on biodiversity and is helpful in formulating conservation action plans.     

Elemental uptake and distribution of nutrients in avocado mesocarp and the impact of soil quality

The distribution of 14 elements (both essential and non-essential) in the Hass and Fuerte cultivars of avocados grown at six different sites in KwaZulu-Natal, South Africa, was investigated. Soils from the different sites were concurrently analysed for elemental concentration (both total and exchangeable), pH, organic matter and cation exchange capacity. In both varieties of the fruit, concentrations of the elements Cd, Co, Cr, Pb and Se were extremely low with the other elements being in decreasing order of Mg > Ca > Fe > Al > Zn > Mn > Cu > Ni > As. Nutritionally, avocados were found to be a good dietary source of the micronutrients Cu and Mn. In soil, Pb concentrations indicated enrichment (positive geoaccumuluation indices) but this did not influence uptake of the metal by the plant. Statistical analysis was done to evaluate the impact of soil quality parameters on the nutrient composition of the fruits. This analysis indicated the prevalence of complex metal interactions at the soil–plant interface that influenced their uptake by the plant. However, the plant invariably controlled metal uptake according to metabolic needs as evidenced by their accumulation and exclusion.     

Air Quality Status of Visakhapatnam (India) – Indices Basis

Industrial development in Visakhapatnam is conspicuous to urban agglomeration and the city is located in a topographical bowl formed by two-hill ranges. A major portion of the city is within the bowl area wherein most of the industrial and commercial activities are existing and lies within a distance of 10 km from the shore of the Bay of Bengal. Due to the peculiar geographic location of city, wind movement is either eastern or western and is engulfed within the hill ranges. Hence, there is a possibility of buildup of air pollution levels within the city. Due to gravity of prevailing situation, air quality status of Visakhapatnam on indices basis is analyzed using a non-linear equation for variable parameters i.e. Suspended particulate matter (SPM). Sulfur dioxide (SO2) and Oxides of nitrogen (NO(x)), which are main criteria pollutants in India. For current analysis seasonal air quality data is used, which indicates SPM values in winter at most of the sites and in summer at few sites are exceeding the prescribed standards. Calculated indices reveal that, in winter as well as in summer, most of the locations experienced poor or bad air quality, which is mainly due to higher concentration of SPM and certain extent of SO2 values. Application of Oak Ridge Air Quality Index (ORAQI) type equations (non-linear) are helpful for air quality management plan in the region on long-term basis and it has been also observed that there are certain lapses of weightage assignment for individual pollutant in application.     

Zinc oxide nanoparticles as efficient catalyst for the synthesis of novel di-spiroindolizidine bisoxindoles in aqueous medium

Environmental Chemistry Letters - Developing environmentally benign synthetic protocols such as reaction in water is a major challenge. However, many of the known methods carried out in an...     

Identification of the hydrogeochemical processes in groundwater using major ion chemistry: a case study of Penna–Chitravathi river basins in Southern India

Hydrogeochemical studies were carried out in the Penna–Chitravathi river basins to identify and delineate the important geochemical processes which were responsible for the evolution of chemical composition of groundwater. The area is underlain by peninsular gneissic complex of Archaean age, Proterozoic meta-sediments, and strip of river alluvium. Groundwater samples were collected covering all the major hydrogeological environs in pre- and post-monsoon seasons. The samples were analyzed for major constituents such as Ca^2?+?, Mg^2?+?, Na^?+?, K^?+?, CO₃ ^???, HCO₃ ^???, Cl^???, SO₂ ^???4, NO₃ ^???, and F^???. The groundwater in general is of Na^?+?–Cl^???, Na^?+?–HCO₃ ^???, Ca^2?+?–Mg^2?+?–HCO₃ ^???, and Ca^2?+?–Mg^2?+?–Cl^??? types. Na^?+? among cations and Cl^??? and/or HCO₃ ^??? among anions dominate the water; Na^?+? and Ca^2?+? are in the transitional state with Na^?+? replacing Ca^2?+? and HCO₃ ^??? Cl^??? due to physiochemical changes in the aquifer and water–rock interactions. The Ca^2?+?–Mg^2?+?–Cl^??? HCO₃ ^??? type water in one third samples suggest that ion exchange and dissolution processes are responsible for its origin. Change in storage of aquifer in a season does not influence the major geochemical makeup of groundwater. Gibbs plots indicate that the evolution of water chemistry is influenced by water–rock interaction followed by evapotranspiration process. The aquifer material mineralogy together with semiarid climate, poor drainage system, and low precipitation factors played major role in controlling groundwater quality of the area.     

The origin and fate of arsenic in coalbed natural gas-produced water ponds

Coalbed natural gas (CBNG)-produced water contains small amounts of trace metals that can accumulate over time in produced water retention ponds. Within the Powder River Basin (PRB) of Wyoming, high concentrations of trace metals in pond water and their effect on shallow groundwater are potential concerns. A pond with a maximum As concentration of 146 microg L(-1) was studied in detail to determine the potential for groundwater pollution and to explain the cause for the high concentration of As. Infiltration characteristics, subsurface hydrology, our fall and pond water quality, isotope signatures, and trace metal balances were examined to assess the hydrology and geochemistry of the pond. The results indicated minimum or no infiltration of pond water and no measurable contamination of the shallow groundwater. The high As concentrations in the pond were determined to be the result of semi-continuous inputs of CBNG-produced water with low As concentrations (0.20-0.48 microg L(-1)), exasperated by low pond volumes during drought conditions. Because of reduced infiltration and high evaporation rates, As became concentrated over time. Reduced infiltration was most likely caused by the high sodium concentration and high sodium adsorption ratio of the CBNG-produced water, which disrupt soil structure. The findings for the pond and the techniques used may serve as a template for future impact assessments of other CBNG-produced water ponds and are relevant for the approximately 4000 ponds currently permitted in the PRB and for future ponds. Further studies are recommended in the use of playa landforms to store marginal-quality produced water.