Effect of specimen planar area on electromagnetic flanging

The specimen parameter that is often mentioned with respect to the ability to achieve electromagnetic forming (EMF) is the specimen thickness. If the skin depth is small compared to this parameter, efficient forming will be achieved. However, another parameter that may affect the ability to achieve efficient forming is the specimen's planar area, i.e., the length and width of the specimen. This would particularly become an important factor if EMF is used to fabricate meso/microscale components. In this research, a flat spiral coil was used to flange 0.508 mm thickness, CuZn30 specimens of varying widths (i.e., 10, 14, 18, 22, 35, and 47 mm). These widths were varied in order to modify the projected area of the coil over the specimen. Results showed that a decrease in the specimen width was generally associated with a decrease in forming (i.e., lower flanging angle) due to edge effects in induced eddy currents. Since the magnetic field distribution from the flat spiral coil is asymmetric, material was overhung on both sides of the die. This yielded an extra half turn on the left side of the specimen, and increased forming. The die was also translated to assess differences in flanging generated. In order to achieve meso/microforming with EMF, attention to the interaction between coil design and specimen dimensions is required.     

COST ANALYSIS OF WATER AND WASTE WATER TREATMENT PROCESSES IN DEVELOPING COUNTRIES1

ABSTRACT: Mathematical modeling techniques are used to develop predictive equations for cost of water and waste water treatment processes in developing countries utilizing socioeconomic, environmental, and technological indicators. Predictive equations are developed for each of the three regions (Africa, Asia, and Latin America) for construction, operation, and maintenance costs of slow sand filter, rapid sand filter, stabilization lagoon, aerated lagoon, activated sludge, and trickling filter. Data analysis indicated that cost of water treatment processes is a function of technological indicator (percentage of imported materials), population, and the design capacity. The variables which gave the best correlation for waste water treatment cost were population, design flow, and the percentage of imported waste water disposal materials.     

Drought planning and water allocation: an assessment of local capacity in Minnesota

Water allocation systems are challenged by hydrologic droughts, which reduce available water supplies and can adversely affect human and environmental systems. To address this problem, drought management mechanisms have been instituted in jurisdictions around the world. Historically, these mechanisms have involved a crisis management or reactive approach. An important trend during the past decade in places such as the United States has been a shift to a more proactive approach, emphasizing drought preparedness and local involvement. Unfortunately, local capacity for drought planning is highly variable, with some local governments and organizations proving to be more capable than others of taking on new responsibilities. This paper reports on a study of drought planning and water allocation in the State of Minnesota. Factors facilitating and constraining local capacity for drought planning were identified using in-depth key informant interviews with state officials and members of two small Minnesota cities, combined with an analysis of pertinent documentation. A key factor contributing to the effectiveness of Minnesota's system is a water allocation system with explicit priorities during shortages, and provisions for restrictions. At the same time, the requirement that water suppliers create Public Water Supply Emergency Conservation Plans (PWSECP) clarifies the roles and responsibilities of key local actors. Unfortunately, the research revealed that mandated PWSECP are not always implemented, and that awareness of drought and drought planning measures in general may be poor at the local level. From the perspective of the two cities evaluated, factors that contributed to local capacity included sound financial and human resources, and (in some cases) effective vertical and horizontal linkages. This analysis of experiences in Minnesota highlights problems that can occur when senior governments establish policy frameworks that increase responsibilities at the local level without also addressing local capacity.     

Assessing the effects of transboundary ozone pollution between Ontario,Canada and New York,USA

We investigated the effects of transboundary pollution between Ontario and New York using both observations and modeling results. Analysis of the spatial scales associated with ozone pollution revealed the regional and international character of this pollutant. A back-trajectory-clustering methodology was used to evaluate the potential for transboundary pollution trading and to identify potential pollution source regions for two sites: CN tower in Toronto and the World Trade Center in New York City. Transboundary pollution transport was evident at both locations. The major pollution source areas for the period examined were the Ohio River Valley and Midwest. Finally, we examined the transboundary impact of emission reductions through photochemical models. We found that emissions from both New York and Ontario were transported across the border and that reductions in predicted O3 levels can be substantial when emissions on both sides of the border are reduced.     

Prioritizing Abandoned Coal Mine Reclamation Projects Within the Contiguous United States Using Geographic Information System Extrapolation

Coal mine reclamation projects are very expensive and require coordination of local and federal agencies to identify resources for the most economic way of reclaiming mined land. Location of resources for mine reclamation is a spatial problem. This article presents a methodology that allows the combination of spatial data on resources for the coal mine reclamation and uses GIS analysis to develop a priority list of potential mine reclamation sites within contiguous United States using the method of extrapolation. The extrapolation method in this study was based on the Bark Camp reclamation project. The mine reclamation project at Bark Camp, Pennsylvania, USA, provided an example of the beneficial use of fly ash and dredged material to reclaim 402,600 sq mi of a mine abandoned in the 1980s. Railroads provided transportation of dredged material and fly ash to the site. Therefore, four spatial elements contributed to the reclamation project at Bark Camp: dredged material, abandoned mines, fly ash sources, and railroads. Using spatial distribution of these data in the contiguous United States, it was possible to utilize GIS analysis to prioritize areas where reclamation projects similar to Bark Camp are feasible. GIS analysis identified unique occurrences of all four spatial elements used in the Bark Camp case for each 1 km of the United States territory within 20, 40, 60, 80, and 100 km radii from abandoned mines. The results showed the number of abandoned mines for each state and identified their locations. The federal or state governments can use these results in mine reclamation planning.     

Effects of sulphur dioxide (SO2) on growth and flowering of SO2-tolerant and non-tolerant genotypes of Phleum pratense

The objective of this study was to compare the growth and interaction of clipping and sulphur dioxide (SO(2)) exposure on SO(2)-tolerant and non-tolerant genotypes of Phleum pratense at two field sites along an SO(2)-concentration gradient. Sulphur-dioxide-tolerant and non-tolerant genotypes of Phleum pratense were identified from indigenous populations that had been collected along the same SO(2)-concentration gradient in southern Alberta, Canada. Physiological differences between the two genotypes were confirmed by supplying leaves with (14)CO(2) and examining the assimilate partitioning between the genotypes. For the field experiment, clones of each genotype and seedlings grown from commercial seed were planted at two different field sites along an SO(2)-emission gradient. There were no differences in growth between the genotypes at the two field sites after the first year except that the SO(2)-tolerant clones had a greater percentage of root length colonised by vesicular-arbuscular (VA) mycorrhizal fungi. After the second growing season, there was a significant decrease in the number of inflorescences produced by plants exposed to SO(2), particularly by the non-tolerant genotype. The added stress of defoliation appeared to increase the sensitivity of flowering to SO(2), again particularly in the non-tolerant genotype. The results of the field study showed that flowering as opposed to vegetative plant growth was more sensitive to long-term low-concentration SO(2) exposure and that this sensitivity was compounded by the stress interaction of defoliation.     

Subsurface patch of a dinoflagellate (Ceratium tripos) off Southern California: Patch length,growth rate,associated vertically migrating species

Ceratium tripos dominated a multi-species dinoflagellate patch in the sub-surface chlorophyll maximum in August 1978 on the Southern California shelf. The specific growth rate () ofC. tripos averaged 0.25 d^-1. Patch length was about 45 km along the shelf. Several members of the subsurface dinoflagellate assemblage were also present in surface samples, but only during the daytime. These apparent vertical migrators includedProrocentrum micans, C. furca, Gonyaulax polyedra and other less common forms. The growth ofC. tripos in the California patch is compared with that in aC. tripos patch off New York in 1976.