Material suppliers and industrial metabolism

Life Cycle Assessment (LCA) is not sufficiently tailored to the analysis of strategic environmental problems of material suppliers. Sustainable development calls for a reduction by a factor of 10 to 20 in the material intensity of the economy, a situation which leads to dramatic shifts in markets for raw materials. Furthermore, a material supplier might have major improvement options in the material’s numerous downstream uses. LCAs, however, can’t cover these two aspects. An adapted form of Substance Flow Analysis (SFA) may be an answer. This approach defines a system in relation to the flow of a specific material through society. All environmental interventions related to the material are inventoried. An emission evaluation indicates the dominant environmental bottlenecks, given the current market volume of each application of the material. This helps to identify improvement options and strategic choices in market portfolios. Scenario analysis on potential measures can further indicate changes of material flows — and thus markets — in the system. The approach is illustrated with a case study on chlorine.     

Improvements of nano-SiO2 on sludge/fly ash mortar

Sewage sludge ash has been widely applied to cementitious materials. In this study, in order to determine effects of nano-SiO(2) additives on properties of sludge/fly ash mortar, different amounts of nano-SiO(2) were added to sludge/fly ash mortar specimens to investigate their physical properties and micro-structures. A water-binding ratio of 0.7 was assigned to the mix. Substitution amounts of 0%, 10%, 20%, and 30% of sludge/fly ash (1:1 ratio) were proposed. Moreover, 0%, 1%, 2%, and 3% of nano-SiO(2) was added to the mix. Tests, including SEM and compressive strength, were carried out on mortar specimens cured at 3, 7, and 28 days. Results showed that sludge/fly ash can make the crystals of cement hydration product finer. Moreover, crystals increased after nano-SiO(2) was added. Hence, nano-SiO(2) can improve the effects of sludge/fly ash on the hydration of mortar. Further, due to the low pozzolanic reaction active index of sludge ash, early compressive strengths of sludge/fly ash mortar were decreased. Yet, nano-SiO(2) could help produce hydration crystals, which implies that the addition of nano-SiO(2) to mortar can improve the influence of sludge/fly ash on the development of the early strength of the mortar.     

Characterization of food waste generators: a Hawaii case study

Information on food waste disposal and on recycling methods and recycled amounts is reported. Data were obtained from a mail and phone survey of all licensed food establishments in Hawaii conducted in 2004 and 2005. Of 8253 licensed food establishments, 5033 completed surveys. It was found that relationships exist between food establishment size (measured by the number of meals served per day or the number of employees) and the amount of food an establishment recycled; establishment type and recycling behavior; and establishment type and amount recycled. The amount of food waste recycled in the state of Hawaii was estimated to be 264,000 L/day and annual food waste generation was estimated to be 336,000 tonnes.     

Biofilm structure and its influence on clogging in drip irrigation emitters distributing reclaimed wastewater

Using reclaimed wastewater for crop irrigation is a practical alternative to discharge wastewater treatment plant effluents into surface waters.However,biofouling has been identified as a major contributor to emitter clogging in drip irrigation systems distributing reclaimed wastewater.Little is known about the biofilm structure and its influence on clogging in the drip emitter flow path.This study was first to investigate the microbial characteristics of mature biofilms present in the emitters and the effect of flow path structures on the biofilm microbial communities.The analysis of biofilm matrix structure using a scanning electron microscopy (SEM) revealed that particles in the matrix of the biofilm coupled extracellular polysaccharides (EPS) and formed sediment in the emitter flow path.Analysis of biofilm mass including protein,polysaccharide and phospholipid fatty acids (PLFAs) showed that emitter flow path style influenced biofilm community structure and diversity.The correlations of biofilm biomass and discharge reduction after 360 h irrigation were computed and suggest that PFLAs provide the best correlation coefficient.Comparatively,the emitter with the unsymmetrical dentate structure and shorter flow path (Emitter C) had the best anti-clogging capability.By optimizing the dentate structure,the internal flow pattern within the flow path could be enhanced as an important method to control the biofilm within emitter flow path.This study established electron microscope techniques and biochemical microbial analysis methods that may provide a framework for future emitter biofilm studies.     

天津地区鱼塘水、悬浮物、沉积物和鱼体中的DDT

采样测定了天津地区2典型鱼塘鲫鱼、鲢鱼、水、悬浮物、沉积物和鱼塘周边表土中的DDT及其代谢产物含量。结果发现,2鱼塘各主要介质以及鱼体肌肉和器官中都富集了较高浓度的DDT。鲫鱼和鲢鱼肌肉中DDT的含量分别为(66.4±2.7)ng·g-1和(24.3±23.4)ng·g-1。肝胰脏、肠和鱼鳃中DDT含量一般高于肌肉,其中肠的富集量最大,是肌肉的3倍以上。生物富集系数(lgBCF)分别为3.7和3.3。2鱼塘鱼体和各相含量有较大差别,鱼塘介质中悬浮物富集浓度最高。表土污染相对严重地区的鱼塘中各介质和鱼体DDT含量均高于另一污染较轻的鱼塘。污染严重鱼塘的DDE/ΣDDT含量比值也相对较高,反映早期污染残留的重要特征。尽管如此,仍然较高的DDT含量以及悬浮物中很低的DDE/ΣDDT含量比值说明很可能还有污染源存在。     

浅谈清洁生产在山东焦化行业中的应用

阐述了在焦化行业开展清洁生产的必要性,结合焦化企业开展清洁生产的实例,从废物最小化和资源化等方面概述了清洁生产技术在焦化行业中的应用;并以山东焦化企业为例论述如何做好清洁生产工作。     

珠江广州河段着生藻类的群落结构及其与水质的关系

于2007年6月、7月和9月,采用玻璃挂片法对珠江广州河段9个断面处着生藻类的分布状况进行了调查,同时测定了叶绿素a、总氮、总磷、溶解氧、pH等环境因子.本调查共观察到着生藻类35种,主要以丝状绿藻占据优势,其中毛枝藻是绝对优势种,其最高数量百分比达97.4%;而附着在绿藻藻体的一些硅藻,如异极藻、脆杆藻也是常见优势物种.着生藻类数量丰富,为3.16×104-3.06×106cells·cm-2;种类多样性较低,Shannon-Weaver种类多样性指数为0.15～2.68.从总氮和总磷含量来看,珠江广州河段水质为Ⅲ类至Ⅴ类之间.调查期间,2007年7月12日举行了"广州市万人游珠江活动",由于活动期间采取的一些截污治理措施,6月、7月水质特别是广州市区河段水质有所好转;但活动过后,营养盐特别是总磷浓度迅速上升,叶绿素a含量和着生藻类数量急剧增加.研究结果说明,珠江广州河段水质能够得以改善,但需要采取持续而有效的措施防止水质的进一步恶化,才能保证珠江水资源的可持续发展.     

Hot Steam Transfer Through Heat Protective Clothing Layers

The aim of this study was to analyse the transfer of steam through different types of textile layers as a function of sample parameters such as thickness and permeability. In order to simulate the human body, a cylinder releasing defined amounts of moisture was also used. The influence of sweating on heat and mass transfer was assessed.

The results show that in general impermeable materials offer better protection against hot steam than semi-permeable ones. The transfer of steam depended on the water vapour permeability of the samples, but also on their thermal insulation and their thickness. Increasing the thickness of the samples with a spacer gave a larger increase in protection with the impermeable samples compared to semi-permeable materials. Measurements with pre-wetted samples showed a reduction in steam protection in any case. On the other hand, the measurements with a sweating cylinder showed a beneficial effect of sweating.     

Performance of Firefighters’ Protective Clothing After Heat Exposure

Heat and mechanical protection properties of 6 fabric combinations commonly used in firefighters’ protective clothing were assessed before and after different heat treatment. It was shown that after heat exposure, the values obtained were generally lower than in the original state. The mechanical properties of the materials were more affected by heat than by heat protective properties. In 2 cases, degradation started before a visible change in the material could be observed, which might be potentially dangerous for the end user who will not realize the alteration of the material.     

重庆市建设工程从业人员现状调查与对比分析

对重庆市106家工程建设单位的从业人员的现状的调查情况进行了分析,发现其在年龄结构、学历结构、职称结构等方面存在的问题,并针对出现的问题提出了改进的建议.