Prediction of future disposal of end-of-life refrigerators containing CFC-11

The objective of this study was to predict the number of refrigerators containing CFC-11 blown isolation foam and the amount of CFC-11 banked in these refrigerators. By using a Weibull-based survival function, the number of CFC-11 containing and still-functioning refrigerators was estimated to be approximately 1.6 million in 2013 in Turkey. In order to determine the amount of CFC-11 in the isolation foam of these refrigerators, polyurethane (PU) foam samples were taken from a refrigerator manufactured in 1993 and the quantity of CFC-11 was analyzed by a GC-MS. It was determined that 113–195 mg CFC-11/g PU remains in the PU foam depending on the location such as door, sides, top and bottom. Knowing that a mid-sized refrigerator contains 4 kg PU on average, the total amount of PU foam to be disposed of is 6344 tons when the CFC-11 containing refrigerators in Turkey become obsolete in the near future. Furthermore, 717–1237 tons of CFC-11 are expected to be banked in the PU foam of these refrigerators which will exert an equivalent amount of ozone depleting potential (ODP). In addition, the global warming potential will vary between 3.4 and 5.9 million tons of CO₂.     

Pyrolysis of waste animal fats in a fixed-bed reactor: Production and characterization of bio-oil and bio-char

Several animal (lamb, poultry and swine) fatty wastes were pyrolyzed under nitrogen, in a laboratory scale fixed-bed reactor and the main products (liquid bio-oil, solid bio-char and syngas) were obtained. The purpose of this study is to produce and characterize bio-oil and bio-char obtained from pyrolysis of animal fatty wastes. The maximum production of bio-oil was achieved at a pyrolysis temperature of 500 °C and a heating rate of 5 °C/min. The chemical (GC–MS analyses) and spectroscopic analyses (FTIR analyses) of bio-oil showed that it is a complex mixture consisting of different classes of organic compounds, i.e., hydrocarbons (alkanes, alkenes, cyclic compounds…etc.), carboxylic acids, aldehydes, ketones, esters,…etc. According to fuel properties, produced bio-oils showed good properties, suitable for its use as an engine fuel or as a potential source for synthetic fuels and chemical feedstock. Obtained bio-chars had low carbon content and high ash content which make them unattractive for as renewable source energy.     

Assessing the Influence of Social Responsibility on Reputation: An Empirical Case-Study in Agricultural Cooperatives in Spain

The attention to ethics has gradually become a concurrent topic of modern companies’ management. In the last years Social Responsibility has become a key issue in the strategic agenda of competitive agriculture cooperatives. However, reputation management has not been a visible strength in the cooperative enterprises. First of all, this work theoretically analyzes the relationship between Social Responsibility and reputation in cooperatives. Later, from a practical point of view, we carry on an empirical analysis focused on the olive oil cooperatives in the south of Spain, in the province of Jaén. With respect to the previous studies on the topic, this work reveals a main reason of interest reinforcing the role of research in addressing real problems of cooperatives. The article points out the characteristics of this kind of agribusiness and shows the importance of the adoption of a responsible orientation in fostering reputation for creating sustainable competitive advantages.     

Critical review of Integrated Water Resources Management: Moving beyond polarised discourse

Integrated Water Resource Management (IWRM) emerged as a popular concept in the water sector in the 20th century. From a highly techno-centric approach in the past, it has taken a new turn embracing Habermasian communicative rationality as a place-based nexus for multiple actors to consensually and communicatively integrate decisions in a hydrological unit. The 'how to integrate' approach had remarkable appeal worldwide in promoting authentic participation of all stakeholders. However, critics argue that the domain of water resource management is a political process of contestation and negotiation; the emphasis is on complexities, contextuality, power dynamics and the importance of analysing real world situations. They demonstrate 'how integration cannot be achieved' given the power dynamics in social interactions. These apparently contradictory discourses draw on different theoretical paradigms and polarise the discourse on IWRM, without offering constructive alternatives. To this end, this paper offers an option to complement this polarised discourse by examining 'how integration actually does take place' in a strategic context thereby facilitating consensual decisions to integrate water management for a sustainable future.     

Analytical methods for waste minimisation in the convenience food industry

Waste creation in some sectors of the food industry is substantial, and while much of the used material is non-hazardous and biodegradable, it is often poorly dealt with and simply sent to landfill mixed with other types of waste. In this context, overproduction wastes were found in a number of cases to account for 20–40% of the material wastes generated by convenience food manufacturers (such as ready-meals and sandwiches), often simply just to meet the challenging demands placed on the manufacturer due to the short order reaction time provided by the supermarkets. Identifying specific classes of waste helps to minimise their creation, through consideration of what the materials constitute and why they were generated. This paper aims to provide means by which food industry wastes can be identified, and demonstrate these mechanisms through a practical example. The research reported in this paper investigated the various categories of waste and generated three analytical methods for the support of waste minimisation activities by food manufacturers. The waste classifications and analyses are intended to complement existing waste minimisation approaches and are described through consideration of a case study convenience food manufacturer that realised significant financial savings through waste measurement, analysis and reduction.     

Approaches to assess biocover performance on landfills

Methane emissions from active or closed landfills can be reduced by means of methane oxidation enhanced in properly designed landfill covers, known as “biocovers”. Biocovers usually consist of a coarse gas distribution layer to balance gas fluxes placed beneath an appropriate substrate layer. The application of such covers implies use of measurement methods and evaluation approaches, both during the planning stage and throughout the operation of biocovers in order to demonstrate their efficiency. Principally, various techniques, commonly used to monitor landfill surface emissions, can be applied to control biocovers. However, particularly when using engineered materials such as compost substrates, biocovers often feature several altered, specific properties when compared to conventional covers, e.g., respect to gas permeability, physical parameters including water retention capacity and texture, and methane oxidation activity. Therefore, existing measuring methods should be carefully evaluated or even modified prior to application on biocovers. This paper discusses possible strategies to be applied in monitoring biocover functionality. On the basis of experiences derived from investigations and large-scale field trials with compost biocovers in Austria, an assessment approach has been developed. A conceptual draft for monitoring biocover performance and recommendations for practical application are presented.     

Methanotrophs and methanotrophic activity in engineered landfill biocovers

The dynamics and changes in the potential activity and community structure of methanotrophs in landfill covers, as a function of time and depth were investigated. A passive methane oxidation biocover (PMOB-1) was constructed in St-Nicéphore MSW Landfill (Quebec, Canada). The most probable number (MPN) method was used for methanotroph counts, methanotrophic diversity was assessed using denaturing gradient gel electrophoresis (DGGE) fingerprinting of the pmoA gene and the potential CH₄ oxidation rate was determined using soil microcosms. Results of the PMOB-1 were compared with those obtained for the existing landfill cover (silty clay) or a reference soil (RS). During the monitoring period, changes in the number of methanotrophic bacteria in the PMOB-1 exhibited different developmental phases and significant variations with depth. In comparison, no observable changes over time occurred in the number of methanotrophs in the RS. The maximum counts measured in the uppermost layer was 1.5 × 10⁹ cells g dw^?1 for the PMOB-1 and 1.6 × 10⁸ cells g dw^?1 for the RS. No distinct difference was observed in the methanotroph diversity in the PMOB-1 or RS. As expected, the potential methane oxidation rate was higher in the PMOB-1 than in the RS. The maximum potential rates were 441.1 and 76.0 μg CH₄ h^?1g dw^?1 in the PMOB and RS, respectively. From these results, the PMOB was found to be a good technology to enhance methane oxidation, as its performance was clearly better than the starting soil that was present in the landfill site.     

Phytopumping for hydraulic control of an arsenic plume

Phytoremediation, the use of plants for in situ contaminant cleanup, is gaining new appreciation as an aesthetically pleasing, sustainable method that naturally makes use of solar power. Hybrid poplars are widely used because they grow rapidly and have high transpiration rates, making them advantageous for hydraulic control of groundwater. However, the tendency for trees and other vegetation to uptake metals may be a disadvantage in some settings due to potential redistribution of metals from groundwater to the ground surface. Therefore, a pilot test in the upper midwestern United States was implemented to evaluate the applicability of poplars to groundwater withdrawal and metals transport. © 2009 Wiley Periodicals, Inc.     

Determination of the optimal escape routes of underground mine networks in emergency cases

Escaping is natural in the case of accidents in underground mines. Determining the optimal escape route is one of the most important factors for relief of miners in the emergency cases. This paper aims at developing a mathematical method to determine the shortest escape time from a given point to alternative points of an underground mine network. It also aims to find the shortest routes between each pair of the given points. The first point refers to the place of the accident where some miners may exist, and the alternative points show the safe places that the miners can escape to. After determining the shortest escape time and its corresponding route between each pair of mine work junctions, it is possible to set an electronic board that shows the access route to the nearest safe location by an arrow sign in each mine work. In this paper, Floyd–Warshall and π algorithms are used to determine the shortest escape time between the place of accident and safe places as well as their corresponding routes. Those algorithms are rigorous since they are supported by mathematical proof. Finally, the algorithms are implemented on the network of a certain underground coal mine and the results are presented.