Sulphur mineralization kinetics of cattle manure and green waste compost in soils.

Sulphur mineralization of cattle manure (CM) and green waste compost (GWC) added to six agricultural soils with different chemical properties was monitored over 10 weeks in a laboratory incubation experiment. Although the amount of sulphur was higher in CM than in GWC, the cumulative SO4(2-)-S values in GWC-treated soils were higher than in soil amended with CM. The percentages of mineralized S were always higher in GWC-treated soil (in the range 1.3-8.5%) than in CM-treated soil (in the range 0.9-3.8%). In three of the six soils, particularly for CM, an immobilization of sulphur was observed. Three kinetic models were evaluated for their suitability to describe the mineralization process. The first-order model best described S mineralization for both amended and control soils. The GWC substantially increased the amount of potentially mineralizable S (S0) relative to the controls. In GWC-treated soils, the rates of S mineralization (k) were higher than rates in the controls. The k of CM-amended soils was often lower than the k of control soils. Parameters derived from the model were tested as indices for assessing the relationships between S mineralization and soil characteristics. The S0 was positively correlated to the amount of cumulative SO4(2-)-S and also to the content of organic C, N and S in soil.     

Automated indirect fluoride determination by ICP-OES using discontinuous-flow analysis

An automated method for the indirect determination of fluoride by inductively coupled plasma atomic emission spectrometry using discontinuous-flow analysis has been developed. A modified flow injection analysis system was used for sample preparation. The method is based on the determination of excess cerium(III) ion after precipitation of CeF₃. Separation of the precipitate is performed online on a syringe membrane filter that is cleaned each analysis cycle by 1 M nitric acid, ensuring a long life-time for the filter. As a result of the short reaction time, a detection limit of 9.5 mg L^?1 was obtained. The precision (RSD) of the proposed method is 1.02% at fluoride concentration of 28 mg L^?1. The applicability of the technique for groundwater monitoring of fluoride-contaminated area is demonstrated.     

Evaluation of geomorphic changes and retreat rates of a coastal pyroclastic cliff in the Campi Flegrei volcanic district,southern Italy

Geomorphic evolution of sea cliffs has significant impact on coastal settlements worldwide, so that evaluation of cliff instability processes, failure factors, and retreat rates involves a growing number of scientists for coastal risk and management purposes. Aerial photogrammetry and lidar are among the most used techniques for topographic characterization and geomorphic monitoring of coastal environments. A crucial role in the combined use of such techniques is the evaluation of different spatial accuracy and co-registration between derived terrain models, so that a robust error analysis is required. In this study, we present a change detection analysis of the Torrefumo coastal cliff, in the Campi Flegrei volcanic area (Southern Italy). Aerial images taken in 1956 and 1974, processed through digital photogrammetry, and an airborne lidar point cloud acquired in 2008 were used to produce Digital Elevation Models of the cliff. The analysis was based on the multi-temporal comparison of these models and included the calculation of volumetric changes and average retreat rates of the cliff face with reference to the 1956–1974 and 1974–2008 time intervals. The spatially variable elevation uncertainty of each Digital Elevation Model was evaluated with a probabilistic approach based on the fuzzy set theory. The results of this study showed significant eroded volumes during the period 1956–1974 and relatively smaller volumes in the 1974–2008 time span, with mean annual retreat rates of 1.2 m/year and 0.17 m/year, respectively. We infer that the significant decrease of erosion characterizing the second period was induced by the sheltering effect at the base of the cliff produced by the construction of a seawall in the early 80’s.     

Promoting ecological sustainable planning for natural stone quarrying. The case of the Orosei Marble Producing Area in Eastern Sardinia

This paper presents an analysis of the main environmental impact factors (noise, vibration, fumes, dust, vehicle traffic) associated with marble quarrying and processing in the Orosei industrial area and their effects. Solutions are also proposed to prevent, mitigate and, where possible, eliminate the impact on the environment. Using three-dimensional topographic models, the authors simulated quarry and industrial processing development, with projections over the next 10, 30 and 50 years. The aim of these simulations was to establish land management planning guidelines for the optimal and environmentally sustainable development of the Orosei Marble industrial area. Lastly, careful quarry development planning is important both for enhancing LCA and for improving production processes through sustainable technologies that yield green label products meeting environmental performance standards.     

Aircraft Emissions: A Comparison of Methodologies Based on Different Data Availability

The impact of air traffic on the global atmosphere is characterised by a high degree of uncertainty, concerning both the physico-chemical phenomena involved and the extent of the forcing due to anthropogenic emissions. The different effects of these emissions (e.g. on climate change, stratospheric ozone depletion, acidification, tropospheric ozone formation) are dealt with by different international bodies and conventions (e.g. IPCC, EMEP. . .) which are trying to define a standard methodology allowing countries to evaluate their contributions to global aircraft emissions and to report these figures in a standardised way. The paper compares different methodologies proposed by the joint EMEP/CORINAIR 'Atmospheric Emission Inventory Guidebook' for estimating aircraft emissions. Adjustments to these methodologies have been proposed, in order to integrate some additional data such as the total amount of flight hours per aircraft type or fuel consumption per trip. In case detailed information is not available, we recommend the use of a VERY SIMPLE methodology which may yield acceptable results, provided that every country makes adequate assumptions on the average aircraft type.     

The molecular composition of humic substances extracted from green composts and their potential for soil remediation

Humic substances play empirically several essential functions in biogeochemical cycles such as storage of carbon, pollutants, nutrients and water, yet the underlying mechanisms remain poorly known because their precise molecular structure is largely unknown so far. Here, we extracted humic substances from biomass waste of bell pepper, fennel, artichoke, coffee ground, coffee husks, and nursery residues. We analyzed humic extracts by ultra-high resolution Orbitrap Fusion Lumos Tribrid 1 M mass spectrometry, using both positive photoionization and negative electrospray ionization modes, and by ¹³C cross polarization/magic angle spinning nuclear magnetic resonance spectroscopy. We identified 5000–7000 unique organic compounds in humic substances by integrating photoionization with electrospray ionization. The chemical distribution of all components was depicted by nuclear magnetic resonance. Humic substances from green composts are composed by a wide variety of hydrophilic and hydrophobic moieties, thus providing the required biosurfactant properties for effective soil washing capacities, with carboxyl-rich alicyclic molecules, fatty acids, and phenolic acids as major constituents. Overall, our findings provide a major insight in the molecular structure of humic substances, thus opening research on mechanisms ruling the origin, fate and behavior of humic substances.