Practical environmental monitoring of major construction projects

Independent teams undertook environmental monitoring of particular concentrations of major construction projects forming part of Hong Kong’s U.S. $20 billion airport infrastructure programme located in dense urban areas. The team combination of environmental specialists with experienced civil engineers enabled pragmatic mitigation measures to be developed and accepted by the construction personnel with the result that potentially significant adverse impacts were averted. The authors discuss the mechanism and success of this innovative approach.     

Prenatal diagnosis using deletion studies in Duchenne muscular dystrophy

Accurate carrier testing and prenatal diagnosis in Duchenne muscular dystrophy (DMD) families is facilitated when an Xp21 deletion is found to be segregating within a family. We discuss the results of the DNA testing in two families, one in which DNA from affected males was available for study and the other in which no DNA from an affected male was available. Factors complicating the counselling of DMD deletion families are outlined.     

DNA-based carrier detection and prenatal diagnosis of tyrosinase-negative oculocutaneous albinism (OCA1A)

We describe molecular prenatal diagnosis and carrier detection of tyrosinase-negative oculocutaneous albinism (OCA1A) in two families. In one family, we carried out DNA-based prenatal diagnosis of OCA1A. In the other family, mutation analysis and carrier detection obviated the need for prenatal diagnosis. Molecular analysis is safer and probably more accurate than fetoscopy and fetal scalp biopsy, and should become the method of first choice for prenatal diagnosis of OCA1.     

Hydrogen storage and distribution systems

Hydrogen storage and transportation or distribution is closely linked together. Hydrogen can be distributed continuously in pipelines or batch wise by ships, trucks, railway or airplanes. All batch transportation requires a storage system but also pipelines can be used as pressure storage system. Hydrogen exhibits the highest heating value per weight of all chemical fuels. Furthermore, hydrogen is regenerative and environment friendly. There are two reasons why hydrogen is not the major fuel of toady’s energy consumption: First of all, hydrogen is just an energy carrier. And, although it is the most abundant element in the universe, it has to be produced, since on earth it only occurs in the form of water. This implies that we have to pay for this energy, which results in a difficult economic task, because since the industrialization we are used to consuming energy for free. The second difficulty with hydrogen as an energy carrier is the low critical temperature of 33 K, i.e. hydrogen is a gas at room temperature. For mobile and in many cases also for stationary applications the volumetric and gravimetric density of hydrogen in a storage system is crucial. Hydrogen can be stored by six different methods and phenomena: high pressure gas cylinders (up to 800 bar), liquid hydrogen in cryogenic tanks (at 21 K), adsorbed hydrogen on materials with a large specific surface area (at T < 100 K), absorbed on interstitial sites in a host metal (at ambient pressure and temperature), chemically bond in covalent and ionic compounds (at ambient pressure), oxidation of reactive metals e.g. Li, Na, Mg, Al, Zn with water. These metals easily react with water to the corresponding hydroxide and liberate the hydrogen from the water. Finally, the metal hydroxides can be thermally reduced to the metals in a solar furnace.     

Intertemporal and intergenerational pareto efficiency: A comment

In a recent issue of this Journal, Sandler and Smith developed an analysis from which they concluded that discounting is Pareto inefficient in an intertemporal context. This comment questions the validity of that conclusion and demonstrates the essential role played by the discount rate in achieving intertemporal Pareto efficiency within a market economy.     

Mobility control: How injected surfactants and biostimulants may be forced into low‐permeability units

Recovering dense nonaqueous‐phase liquid (DNAPL) remains one of the most difficult problems facing the remediation industry. Still, the most common method of recovering DNAPL is to physically remove the contaminants using common technologies such as total fluids recovery pumps, vacuum systems, and “pump‐and‐treat.” Increased DNAPL removal can be attained using surfactants to mobilize and/or solubilize the pollutants. However, very little is understood of the methods developed by petroleum engineers beginning in the 1960s to overcome by‐passed, low‐permeability zones in heterogeneous oil reservoirs. By injecting or causing the formation of viscous fluids in the subsurface, petroleum engineers caused increased in‐situ pressures that forced fluid flow into low permeability units as well as the higher permeability thief zones. Polymer flooding involves injecting a viscous aqueous polymer solution into the contaminated aquifer. Foam flooding involves injecting surfactant to decontaminate the high‐permeability zones and then periodic pulses of air to cause a temporary viscous foam to form in the high‐permeable zones after all DNAPL is removed. Later surfactant pulses are directed by the foam into unswept low‐permeable units. These methods have been applied to DNAPL removal using surfactants but they can also be applied to the injection of bio‐amendments into low‐permeability zones still requiring continued remediation. Here we discuss the principles of mobility control as practiced in an alluvial aquifer contaminated with chlorinated solvent and coal tar DNAPLs as well as some field results. © 2003 Wiley Periodicals, Inc.     

An Application of a Modified Ecological Footprint Method and Structural Path Analysis in a Comparative Institutional Study

This paper presents an application of a modified ecological footprint method, using a regional, disturbance-based approach. In contrast to conventional institutional ecological footprint calculations, energy and land use resulting from all upstream production processes are explored by employing an input-output framework. Ecological footprints are calculated for two research institutions: the School of Physics (SoP) at the University of Sydney, and the Sustainable Ecosystems (CSE) Department of the Commonwealth Scientific and Industrial Research Organisation. These are broken down further in terms of land disturbance and greenhouse gas emissions, and as a function of production layer. To enable the use of the results in policy formulation, the ecological footprints are decomposed into detailed contributing paths, which are ranked according to their importance, using structural path analysis. The paper demonstrates that a considerable proportion of impacts occur upstream in industrial production. Thus a significant result of the study is the weight of obscure paths in the total footprints and, therefore, the importance of conducting an holistic assessment in order to ensure all upstream contributions are captured in the final impact of the institution.     

Alteration in Rhizosphere Soil Properties of Afforested <Emphasis Type="Italic">Rhamnus lycioides</Emphasis> Seedlings in Short-Term Response to Mycorrhizal Inoculation with <Emphasis Type="Italic">Glomus intraradices</Emphasis> and Organic Amendment

The reestablisment of autochthonous plant species is an essential strategy for recovering degraded areas under semiarid conditions. A field experiment was carried out to assess the short-term effect of two reafforestation methods involving mycorrhizal inoculation and compost addition on soil quality parameters and Rhamnus lycioides seedling growth. The nutrient content (NPK) and enzymatic activities (dehydrogenase, urease, protease-BAA, acid phosphatase and β-glucosidase) increased and bulk density decreased in the rhizosphere soil with the organic amendment. Biomass C of rhizosphere soil increased by at least 240% with respect to the control soil after mycorrhizal inoculation and the combination of compost addition + mycorrhizal inoculation. Both mycorrhizal inoculation and composted organic residue addition increased R. lycioides seedling growth in the same proportion. In the short term, we conclude that the application of both reafforestation methods not only enhances the establishment of R. lycioides seedlings, but also improves soil quality.