Development and evaluation of a continuous coarse (PM10-PM2.5) particle monitor

In this paper, we describe the development and laboratory and field evaluation of a continuous coarse (2.5-10 microm) particle mass (PM) monitor that can provide reliable measurements of the coarse mass (CM) concentrations in time intervals as short as 5-10 min. The operating principle of the monitor is based on enriching CM concentrations by a factor of approximately 25 by means of a 2.5-microm cut point round nozzle virtual impactor while maintaining fine mass (FM)--that is, the mass of PM2.5 at ambient concentrations. The aerosol mixture is subsequently drawn through a standard tapered element oscillating microbalance (TEOM), the response of which is dominated by the contributions of the CM, due to concentration enrichment. Findings from the field study ascertain that a TEOM coupled with a PM10 inlet followed by a 2.5-microm cut point round nozzle virtual impactor can be used successfully for continuous CM concentration measurements. The average concentration-enriched CM concentrations measured by the TEOM were 26-27 times higher than those measured by the time-integrated PM10 samplers [the micro-orifice uniform deposit impactor (MOUDI) and the Partisol] and were highly correlated. CM concentrations measured by the concentration-enriched TEOM were independent of the ambient FM-to-CM concentration ratio, due to the decrease in ambient coarse particle mass median diameter with an increasing FM-to-CM concentration ratio. Finally, our results illustrate one of the main problems associated with the use of real impactors to sample particles at relative humidity (RH) values less than 40%. While PM10 concentrations obtained by means of the MOUDI and Partisol were in excellent agreement, CM concentrations measured by the MOUDI were low by 20%, and FM concentrations were high by a factor of 5, together suggesting particle bounce at low RH.     

Genotoxic damage in free-living Algerian mouse (Mus spretus) after the Coto Doñana ecological disaster

The Do?ana National Park (Spain), one of the most important wildlife sites in the West of Europe, was affected (25 April 1998) by the spill of acidic waste rich in toxic metals (mainly zinc, lead, copper, etc.), arsenic and aromatic amines from the Aznalcollar mine accident. Micronuclei test with May Grunwald-Giemsa and with CREST-antikinetocore staining using DAPI as counter-staining were performed on peripheral blood erythrocytes from Algerian mice to evaluate genotoxic damage. Animals were collected in four locations each differently affected by the disaster. Higher frequencies of micronuclei and CREST-positive micronuclei were observed in the sites, which were reached by toxic sludge and contaminated water in comparison with those located within the park. The results obtained applying the two methods indicate that DAPI staining is more sensitive in detecting micronuclei. Genotoxic biomonitoring should be further carried out in the area to control the mutagenetic level in natural populations.     

On the hydro-dispersive equivalence between multi-layered mineral barriers

In the context of municipal solid waste and hazardous waste disposal, the notion of "equivalence" between different barrier designs appears in regulatory documents from several industrialized countries. While in the past, equivalence has been thought of mainly in terms of contaminant travel times, in recent years it has been defined more in terms of the magnitude of a disposal site's potential impact on groundwater resources. This paper presents some original analytical solutions to the problem of contaminant migration through a multi-layered mineral barrier. The solutions account for the two major mechanisms of subsurface contaminant migration, namely, advection and diffusion-dispersion. An example application using the proposed solutions and a numerical model illustrates how one multi-layered mineral barrier can be considered superior to another from a strictly hydro-dispersive viewpoint. The influence of partial saturation of the mineral barrier is investigated using a numerical solution to the Richards equation for unsaturated flow. It is emphasized that conclusions relative to the superiority of one multi-layered barrier, with respect to another, should not only consider hydro-dispersive aspects, but also other processes such as the mechanical and chemical evolutions of the different barrier components. Although such phenomena are poorly addressed by existing models, failure to take them into account, at least in a qualitative fashion, may lead to unconservative conclusions with respect to barrier equivalence.     

Metals in sediments and the edible cockle Cerastoderma edule from two Moroccan Atlantic lagoons: Moulay Bou Selham and Sidi Moussa.

Metals (Cd, Cu, Pb and Zn) were determined over a 3-year period in sediments and bivales Cerastoderma edule from two lagoon ecosystems on the Moroccan Atlantic coastline, Moulay Bou Selham and Sidi Moussa. Sediment metal concentrations were seasonally influenced, and were highest, generally, in winter--possibly signifying an increased contribution from run-off from adjacent arable land and roads. Neither site can be considered highly contaminated; however, Cd was enriched at Sidi Moussa, probably as a result of waste discharge from phosphate industries 20 km along the coast to the northeast. This ability to act as a sink for metals at distance from sources demonstrates the need for surveillance in these sensitive environments. Copper and Zn concentrations in edible cockles C. edule appear to be regulated over the concentration ranges currently found in lagoon sediments. In contrast, body burdens of Pb and, to a lesser extent Cd, reflect sediment levels and might be useful in future risk assessments. Metal concentrations Cerastoderma edule are seasonally related to the reproductive cycle, however, and sample timing will need to be standardised in future monitoring exercises.     

Chlorophyll a fluorescence, antioxidant enzymes and lipid peroxidation in tomato in response to ozone and benomyl.

Ozone is a widely distributed phytotoxic air pollutant and is known to reduce the yield of several important agricultural crops in Spain. However, benomyl has been found to lessen the adverse impact of ozone on plants. We studied the effects of ozone and benomyl on chlorophyll a fluorescence, antioxidant enzymes, and lipid peroxidation in tomato (Lycopersicon esculentum Mill. cv. Tiny Tim) grown in open-top chambers in the field. Our results indicate that benomyl prevented the peroxidation of membrane lipids and increased protection of PSII from ozone. There was also a significant reduction in the activity of the antioxidant enzyme superoxide dismutase in ozone-exposed plants that had not been treated with benomyl. Comparing plants treated with benomyl to untreated plants we found that, on exposure to ozone, a greater fraction of light absorption energy was cycled through the photosynthetic system in benomyl-treated plants, as shown by the higher PSII-mediated electron flow and the higher fraction of open PSII reaction centers. The values analyzed in the fluorescence parameters and lipid peroxidation were similar for plants without benomyl grown in a charcoal-filtered environment and benomyl-treated plants exposed to ozone.     

Microcosm studies of microbial degradation in a coal tar distillate plume

Investigation of a groundwater plume containing up to 24 g l(-1) phenolic compounds suggested that over a period of nearly 50 years, little degradation had occurred despite the presence of a microbial community and electron acceptors within the core of the plume. In order to study the effect of contaminant concentration on degradation behaviour, laboratory microcosm experiments were performed under aerobic and anaerobic conditions at four different concentrations obtained by diluting contaminated with uncontaminated groundwater. The microcosms contained groundwater with total phenols at ca. 200, 250, 660 and 5000 mg l(-1), and aquifer sediment that had been acclimatised within the plume for several months. The microcosms were operated for a period of 390-400 days along with sterile controls to ascertain whether degradation was microbially mediated or abiotic. Under aerobic conditions, degradation only occurred at concentrations up to 660 mg l(-1) total phenols. At phenol concentrations below 250 mg l(-1) a benzoquinone intermediate, thought to originate from the degradation of 2,5-dimethylphenol, was isolated and identified. This suggested an unusual degradative pathway for this compound; its aerobic degradation more commonly proceeding via catecholic intermediates. Under anaerobic conditions, degradation only occurred in the most dilute microcosm (total phenols 195 mg l(-1)) with a loss of p-cresol accompanied by a nonstoichiometric decrease in nitrate and sulphate. By inference, iron(III) from the sediment may also have been used as a terminal electron acceptor, in which case the amount of biologically available iron released was calculated as 1.07 mg Fe(III)/g of sediment. The study shows that natural attenuation is likely to be stimulated by dilution of the plume.     

Economic comparison of emission control systems for glass manufacturing furnaces with heat recovery

Glass manufacturing, like other process industries, is faced with air pollution compliance problems due to ever stricter emission limits. Several waste gas cleaning equipment options are available for air pollution control (APC) in glass plants, the most common arrangements being based on electrostatic precipitator (ESP) or fabric filter (FF) dust collectors and semi-wet or dry processes for acid gas removal. However, several counteracting aspects affect the choice of gas cleaning technologies, which are confirmed by the discrepancies encountered in actual suppliers' bids. In this paper, the main pollution control options are analyzed by carrying out a critical comparison under the cost-effectiveness point of view to select the lowest cost arrangement considering capital investment, operating expenses, and energy-saving revenues from heat recovery processes. The analysis is carried out with reference to a case study involving actual float glass production lines at Pilkington plants in Italy.     

Resistant sorption of in situ chlorobenzenes and a polychlorinated biphenyl in river Rhine suspended matter

The desorption kinetics of in situ chlorobenzenes (dichlorobenzenes, pentachlorobenzene and hexachlorobenzene) and 2,4,4^′-trichlorobiphenyl (PCB-28) were measured with a gas-purge technique for river Rhine suspended matter sampled in Lobith, The Netherlands. This suspended matter is the main source of sediment accumulation in lake Ketelmeer. In lake Ketelmeer sediment earlier observations showed that slow and very slow fractions dominate the desorption profile.

For the river Rhine suspended matter, only for PCB-28 a fast desorbing fraction of around 1.6% could be detected. The observed rate constants were on the average 0.2 h⁻¹ for fast desorption, 0.004 h⁻¹ for slow desorption, and 0.00022 h⁻¹ for very slow desorption. These values are in agreement with previous findings for the sediment from lake Ketelmeer and with available literature data on fast, slow, and very slow desorption kinetics.

The results from this study show the similarity of desorption profiles between river Rhine suspended matter, and the top layer sediment from lake Ketelmeer. This indicates that slow and very slow fractions are already present in material forming the top layer of lake Ketelmeer, and were not formed after deposition of this material in the lake. The absence of detectable fast fractions for most compounds could be caused by the absence of recent pollution of the suspended matter. But, the observations may also be explained by a rapid disappearance of compounds from the fast fraction due to a combination of a high affinity of very slow sites for these compounds, and their relatively high volatility.     

Methodology for estimating soil carbon for the forest carbon budget model of the United States, 2001

The largest carbon (C) pool in United States forests is the soil C pool. We present methodology and soil C pool estimates used in the FORCARB model, which estimates and projects forest carbon budgets for the United States. The methodology balances knowledge, uncertainties, and ease of use. The estimates are calculated using the USDA Natural Resources Conservation Service STATSGO database, with soil dynamics following assumptions based on results of site-specific studies, and area estimates from the USDA Forest Service. Forest Inventory and Analysis data and national-level land cover data sets. Harvesting is assumed to have no effect on soil C. Land use change and forest type transitions affect soil C. We apply the methodology to the southeastern region of the United States as a case study.     

Application of the Microtox test and pollution indices to the study of water toxicity in the Albufera Natural Park (Valencia, Spain)

The toxic effects of waters collected from irrigation channels in a Mediterranean wetland (Albufera Natural Park, Valencia, Spain) were tested with the Microtox assay and compared with six pollution indices (PIs) defined from analytical parameters. Chemical oxygen demand (COD), biological oxygen demand (BOD), nutrients, heavy metals and pesticides were measured. The bioassay result (concentrations of the water sample (% V/V) that reduced light emission to 10%, 20% and 50%, EC10, EC20 and EC50, respectively (ECs)) was compared with the PIs. This comparison has demonstrated a general agreement between ECs and PIs, except in the case of irrigation channels affected by herbicides used in rice farming (molinate and thiobencarb). No pronounced inhibition was detected in the bioluminescence in relation to the eutrophic parameters in the irrigation waters for EC50 values, indicating that this parameter does not suffice to detect eutrophic waters. Data derived from irrigation water pollution and bioassay were assembled by multivariate statistical techniques (principal component analysis). These components were associated with various contamination sources.