Best Management Practices for Silvicultural Chemicals and the Science Behind Them

Silvicultural chemicals include fertilizers and pesticides applied for forest management. All states east of the Rockies have at least some form of silvicultural chemical best management practices (SCBMPs) and it is widely accepted that SCBMPs effect some protection of water quality. All SCBMPs recommend handling and application precautions and a minimum width streamside management zone (SMZ) on each side of streams for protection of water quality and aquatic ecosystems. Typically these zones increase in width as stream width increases. In areas where cold-water fish are present, additional widths are designated for their protection. Minimum SMZ widths range from 8 to 91 meters on each side of the stream bank for intermittent and perennial streams. Most SMZ recommendations do not cover ephemeral drainages, ditches or canals. SMZs are generally described as being site specific with width dependent on slope, soil type and other conditions as well as the stream's designation as perennial or intermittent. The science behind SCBMPs is often elusive. Spray drift can be controlled through proper selection and use of application technology while considering site specific conditions. SMZs greatly reduce the amount of herbicides reaching streams. Available toxicological data and research on aquatic ecosystem impacts from herbicide use suggest that additional protection from silvicultural chemicals may not be necessary. However, there is evidence to suggest that protection of ephemeral and intermittent channels can further reduce entry of silvicultural chemicals into streams and also reduce sedimentation. This may be the most fruitful area of research we can pursue in light of the knowledge gaps listed.     

Radiogenic Lead Isotopes and Time Stratigraphy in the Hudson River, New York

Radionuclide, radiogenic lead isotope and trace metal analyses on fine-grained sediment cores collected along 160 km of the upper and tidal Hudson River were used to examine temporal trends of contaminant loadings and to develop radiogenic lead isotopes both as a stratigraphic tool and as tracers for resolving decadal particle transport fluxes. Very large inputs of Cd, Sb, Pb, and Cr are evident in the sediment record, potentially from a single manufacturing facility. The total range in radiogenic lead isotope ratios observed in well-dated cores collected about 24 km downstream of the plant is large (e.g., maximum difference in ²⁰⁶Pb/²⁰⁷Pb is 10%), characterized by four major shifts occurring in the 1950s, 1960s, 1970s and 1980s. The upper Hudson signals in Cd and radiogenic lead isotopes were still evident in sediments collected 160 km downstream in the tidal Hudson. The large magnitude and abrupt shifts in radiogenic lead isotope ratios as a function of depth provide sensitive temporal constraints that complement information derived from radionuclide analyses to significantly improve the precision of dating assignments. Application of a simple dilution model to data from paired cores suggests much larger sediment inputs in one section of the river than previously reported, suggesting particle influxes to the Hudson have been underestimated.     

The Transit of 35SO4 2- and 3H2O Added In Situ to Soil in a Boreal Coniferous Forest

A solution containing ³⁵SO₄ ^2- and ³H₂O was applied to four plots (5 × 5 m) in a boreal coniferous forest in the Laflamme Lake watershed, Québec, under two contrasting conditions: in summer (plots 1 and 2), and on the snowpack before snowmelt (plots 3 and 4). The transit of both these tracers in the soil solution was then followed through a network of soil lysimeters located at different depths. Four months after the summer application, ³H₂O had infiltrated the whole soil profile at plot 1, while ³⁵SO₄ ^2- was only observed in the LFH and Bhf horizons. A ³⁵SO₄ ^2- budget calculated from mid-August to November indicated that 89 and 10.6% of the added ³⁵SO₄ ^2- was retained within the LFH and the Bhf layers, respectively. Fifteen months later, the added ³⁵SO₄ ^2- was distributed in the following proportions within the soil horizons: LFH (73.7%), Bhf (11.8%) and Bf (12.8%), for a total retention rate of 98.3%. The superficial penetration of ³H₂O at plot 2 was indicative of a major lateral water movement that prevented the calculation of a ³⁵SO₄ ^2- budget. This situation also was observed at plot 4 during snowmelt. At plot 3, ³H₂O moved freely through the soil profile and a significant fraction of the added ³⁵SO₄ ^2- reached the B horizons, where it was presumably adsorbed on aluminum (Al) and ferric (Fe) oxides. The ³⁵SO₄ ^2- budget for plot 3 from March to November indicated that 87% of the added ³⁵SO₄ ^2- was retained within the soil profile, with most being retained in the B horizons (LFH = 33.1%, Bhf = 33.1%, Bf = 20.8%). The contrasting retention patterns of ³⁵SO₄ ^2- within the soil profile following the summer addition and snowmelt likely was caused by the contrastingsoil temperatures and soil solution residence times within the differentsoil layers. The persistence of ³⁵SO₄ ^2- in the soil solution of the entire profile long after the initial tracer infiltration, and the relative temporal stability of specific activity of SO₄ ^2-, point to the establishment of an isotopic equilibrium between the added ³⁵SO₄ and the active S-containing reservoirs within a given soil horizon. Overall, the results clearly illustrate the very strong potential for ³⁵SO₄ ^2- retention and recycling in forest soils.     

Measurements of PCB Fluxes into the Atmosphere from a Site Receiving Stabilized Dredged Material

A 50 ha known contaminated site in Bayonne, New Jersey, U.S.A. is permitted to receive up to 3 × 10⁶ m³ of sediment dredged from navigation channels in the New York/New Jersey Harbor. Much of the sediment is expected to contain low to moderate concentrations of industrial and agricultural chemicals, including Polychlorinated Biphenyls (PCBs). The dredged material brought to the site is stabilized with cement and then placed as a capping and grading layer. The flux of PCBs from drying stabilized dredged material has been estimated from measurements of PCB air concentrations at two heights above the ground along with micrometeorological observations. A statistically significant gradient in PCB concentrations has been consistently measured in the first 3 m above the ground. Observed PCB fluxes were highest over freshly placed stabilized dredged sediment and decreased as it cured. The highest flux observed in this study was 7214 ng/m²/h, but during subsequent sampling intervals at the same site, the flux estimates decreased by an order of magnitude over a 5-day interval.     

Towards a model of safety climate measurement.

In this study, a survey instrument was developed to measure safety climate. A review of the scientific literature as well as consultation with an expert panel was used to determine the survey's dimensions. Next, the survey was administered, first as a pilot study (n = 15) and then as a full scale study (n = 229), to employees of the City of Cincinnati Department of Public Works. The psychometric integrity of the survey was assessed according to validity, reliability and utility criteria. Results are presented and discussed.     

Transition to self‐directed work teams: implications of transition time and self‐monitoring for managers' use of influence tactics

In the face of heightened competitive pressures, elevated quality expectations, and calls for worker empowerment, more and more organizations have turned to self‐directed work teams (SDWTs). A review of the literature devoted to SDWTs suggests that managers often struggle with the transition to SDWTs because of the required shift in control to SDWT members. To promote the development of work teams, managers must modify their use of influence tactics in direct response to the control shift. In this study, we explore changes in managers' usage of influence tactics during the transition to SDWTs within a large aluminum manufacturing plant. Analyses of longitudinal data show that despite the new team environment, managers' use of influence tactics was focused at the individual level. We also found that transition time accounts for variance in managers' choices of influence tactics. Finally, an exploratory analysis suggests that high as opposed to low self‐monitoring managers may be more prone to increase their usage of soft influence tactics and decrease their usage of hard influence tactics over the course of the transition; the influence behavior of low self‐monitoring managers remained unchanged. Implications for future research are discussed. Copyright © 2004 John Wiley & Sons, Ltd.     

Client–project manager engagements,trust, and loyalty

This study addresses the behaviors of project managers under various conditions of cognitive and affective trust, and the implications for obtaining client loyalty. Theoretical foundations were drawn from interpersonal and interorganizational trust literature. A test of the proposed theoretical framework was conducted in a field setting utilizing a matched design of both project managers and their clients. The results show that reliable project performance positively impacted client loyalty intentions and service‐oriented OCBs positively impacted client secondary retention. An interaction showed that in low cognitive trust situations the project manager behavior of reliable project performance facilitated the obtainment of client loyalty intentions. Implications for research and practice are discussed. Copyright © 2004 John Wiley & Sons, Ltd.     

EFFECTIVENESS OF POLYACRYLAMIDE (PAM) IN IMPROVING RUNOFF WATER QUALITY FROM CONSTRUCTION SITES1

ABSTRACT: Erosion from construction sites significantly affects water quality in receiving streams. A rainfall simulator was used to evaluate the effectiveness of different methods for controlling erosion from construction sites. Erosion control methods investigated included dry and liquid applications of polyacrylamide (PAM), hydroseed, and straw mulch. Fertilizer was also applied to each plot to examine the effectiveness of the methods in reducing nutrient losses in runoff. Runoff samples were analyzed for total suspended solids (TSS), nitrate, total Kjeldahl nitrogen (TKN), ammonium, total phosphorus (TP), and orthophosphate. Among all treatments investigated, straw mulch was the most effective treatment for controlling TSS and nutrient losses during short term and long term simulations. The low liquid PAM (half the recommended PAM) treatment resulted in the highest reduction in runoff, TSS bound nitrogen, and total nitrogen (TN) concentrations and loadings. The study results indicate that a high application rate (twice the recommended rate) of PAM could actually increase runoff and TSS losses. At a low application rate, both liquid and dry PAM were effective in reducing TSS and nutrient losses in runoff. However, application of the liquid form of PAM to construction sites is more practical and perhaps more economical than applying the PAM in the dry form.     

EFFECTS OF WATERSHED REPRESENTATION ON RUNOFF AND SEDIMENT YIELD MODELING1

ABSTRACT: This paper evaluates the effects of watershed geometric representation (i.e., plane and channel representation) on runoff and sediment yield simulations in a semiarid rangeland watershed. A process based, spatially distributed runoff erosion model (KINEROS2) was used to explore four spatial representations of a 4.4 ha experimental watershed. The most complex representation included all 96 channel elements identifiable in the field. The least complex representation contained only five channel elements. It was concluded that oversimplified watershed representations greatly influence runoff and sediment yield simulations by inducing excessive infiltration on hillslopes and distorting runoff patterns and sediment fluxes. Runoff and sediment yield decrease systematically with decreasing complexity in watershed representation. However, less complex representations had less impact on runoff and sediment‐yield simulations for small rainfall events. This study concludes that the selection of the appropriate level of watershed representation can have important theoretical and practical implications on runoff and sediment yield modeling in semiarid environments.