Improving the effectiveness of angular dispersion in plant neighbourhood models

Spatial arrangement can be an important factor affecting competition among plants. We evaluated three ways to improve the effectiveness of angular dispersion (AD) for describing spatial arrangement in plant neighbourhood models. First, we modified Zar's (1974) AD formula by weighting each neighbour by its competitive influence. We calculated this using two different competition indices to derive an AD of competitive influence, rather than of equally weighted plant locations, around a subject plant. Secondly, we constrained the effect of AD on the neighbourhood model using an optimised parameter that defines the minimum value that AD can adopt. Thirdly, we included the direction in which competition is concentrated (the mean azimuth of the weighted AD) in the growth models. These developments were evaluated within a radial growth model of Scots pine and birch growing in semi-natural, spatially heterogeneous forest. Weighted AD resulted in significant improvements in predicted radial growth of target trees over the traditional measure of AD. The optimised parameter that defines the minimum value of AD consistently evolved values significantly higher than zero. This suggests that clumped and dispersed neighbourhoods do not differ in their negative effects on a subject tree as much as expected. The inclusion of directional components of the weighted AD did not improve the accuracy of the growth models. Weighting of the angular dispersion of neighbours improved the performance of local competition models.     

Recording the Response of Plants to Various Air Pollutants

A discussion of the methods used to determine the most economic design of chimney for a new thermal power station or large industrial plant is presented, with the objective that ground level concentration of pollutants will be kept at a minimum. Attention is paid to the geography and climatology of the site, with special reference to the frequency and height of inversions and the prevailing wind direction and speed.

A method is illustrated in using a large thermal power station as an example. The maximum sulfur dioxide concentrations at ground level are computed for several chimney heights and gas exit velocities. The values of these sulfur dioxide concentrations, the capital cost of the chimney, the pumping costs, and the gas pressures within the chimney are considered in selecting a suitable chimney height and a gas exit velocity which will meet most economically the stated objective.

The paper deals primarily with chimneys for industrial or power boiler plant of maximum continuous rating greater than 450 million Btu/hr (about 450,000 lbs of steam/hr), or to chimneys serving furnaces burning fuel at a maximum rate greater than 50,000 lbs/hr of coal, or 80,000 lbs/hr of oil. For chimneys serving plant with smaller heat inputs, chimney selection by reference to Clean Air Act 1956, Memorandum on Chimney Heights is suggested.     

Chemicals in Household Products: Problems with Solutions

The success of a regulatory regime in decreasing point-source emissions of some harmful chemicals has highlighted the significance of other sources. A growing number of potentially harmful chemicals have been incorporated into an expanding range of domestic household products and are sold worldwide. Tighter regulation has been proposed, and the European Commission has introduced the Regulation on the Registration, Evaluation, and Authorisation of Chemicals to address this concern. However, it is clear that in addition to the regulation, there is a potential to effect change through retailer and consumer attitudes and behaviours. Interviews were conducted with 7 key stakeholder groups to identify critical issues, which were then explored using a public survey questionnaire (1,008 respondents) and 8 subsequent focus groups. The findings demonstrated that the issue of chemicals in products is of concern to consumers for reasons of personal health rather than environmental protection. Key obstacles to the wider purchase of “green-alternative” products included perceived high cost and poor performance, lack of availability of products, and poor information concerning such products. Although improved regulation was seen as part of the solution, consumers must also play a role. It was clear from this study that consumers are not currently able to make informed choices about the chemicals they use but that they would be receptive to moving toward a more sustainable use of chemicals in the future if empowered to do so.     

Reproduction and development of the polychaete Stauronereis rudolphi,including a summary of development in the superfamily Eunicea

The life history of the dorvilleid polychaete Stauronereis rudolphi (Delle Chiaje) was studied through the F₂ generation under laboratory conditions. The species released its gametes into the water where fertilization occurred. The pelagic larvae swam for one week before settling. Segments were added successively and sexual maturity was reached in one year of laboratory culture. Spawned adults recovered and began feeding a few days after spawning. The culture techniques and foods used to rear developing eggs, larvae, juveniles, and adults were described. Comparisons were made with other developmental studies in the superfamily Eunicea.This study was a portion of a thesis submitted in partial fulfillment of the requirements for the degree of Master of Arts in the Department of Biology, California State College at Long Beach. It was in part supported by research grant WP-00531-02 from the National Institute of Health, U. S. Public Health Service, under supervision of Dr. Donald J. Reish. Contribution No. 1 of the Ira C. Darling Center for Research, Teaching and Service, University of Maine, Maine 04573, U.S.A.     

Residual soil nitrate after potato harvest

Nitrogen loss by leaching is a major problem, particularly with crops requiring large amounts of N fertilizer. We evaluated the effect of N fertilization and irrigation on residual soil nitrate following potato (Solanum tuberosum L.) harvests in the upper St-John River valley of New Brunswick, Canada. Soil nitrate contents were measured to a 0.90-m depth in three treatments of N fertilization (0, 100, and 250 kg N ha(-1)) at two on-farm sites in 1995, and in four treatments of N fertilization (0, 50, 100, and 250 kg N ha(-1)) at four sites for each of two years (1996 and 1997) with and without supplemental irrigation. Residual soil NO3-N content increased from 33 kg NO3-N ha(-1) in the unfertilized check plots to 160 kg NO3-N ha(-1) when 250 kg N ha(-1) was applied. Across N treatments, residual soil NO3-N contents ranged from 30 to 105 kg NO3-N ha(-1) with irrigation and from 30 to 202 kg NO3-N ha(-1) without irrigation. Residual soil NO3-N content within the surface 0.30 m was related (R2 = 0.94) to the NO3-N content to a 0.90-m depth. Estimates of residual soil NO3-N content at the economically optimum nitrogen fertilizer application (Nop) ranged from 46 to 99 kg NO3-N ha(-1) under irrigated conditions and from 62 to 260 kg NO3-N ha(-1) under nonirrigated conditions, and were lower than the soil NO3-N content measured with 250 kg N ha(-1). We conclude that residual soil NO3-N after harvest can be maintained at a reasonable level (<70 kg NO3-N ha(-1)) when N fertilization is based on the economically optimum N application.     

Temperature and microbial activity effects on trace element leaching from metalliferous peats

Due to geochemical processes, peat soils often have elevated concentrations of trace elements, which are gradually released following drainage for agriculture. Our objectives were to use incubation temperatures to vary microbial activity in two metalliferous peats (M7 acidic peat and M3 neutral peat) from the Elba, New York region, and to use periodic leaching to assess the extent of trace element release from these soils. Dried soils were mixed with glass beads to maintain aeration, moistened, and incubated at 4, 16, 28, and 37 degrees C in 10-cm-diameter x 8-cm-tall columns. Five incubation-leaching cycles were performed, each consisting of 7.3 d of incubation (28 d for the final cycle) followed by 16 h of leaching with synthetic acid rain at 2.5 mm h(-1). Microbial activity was determined initially and after the final leaching by measuring C mineralization following glucose stimulation. Cumulative respiration results were ranked 28 > 16 > 4 > 37 degrees C, with M7 acidic peat respiration values greater than M3 neutral peat at each temperature. Initial leachate pH levels were between 2 and 4, with acidification less pronounced and shorter-lived for the M3 peat. Leachate S, dissolved organic carbon (DOC), NO3-N, and trace elements declined with successive leachings (rebounding slightly in the final M3 leachate), with concentrations typically greater in the M7 leachate. Elemental losses followed the same general ranking (28 > 16 > 4 > 37 degrees C); losses at 28 degrees C were 15 to 22% for As, Cd, Ni, and Zn from the M7 peat; losses from M3 were comparable only for Cu (1%) and Ni (19%). The correlation of respiration with S, DOC, and trace elements losses indicates that microbial processes mediated the release of trace elements in both peat soils. Neutral M3 peat pH levels limited losses of most analytes.     

Egyptian plant species as new ozone indicators

The aim of this study was to test and select one or more highly sensitive, specific and environmentally successful Egyptian bioindicator plants for ozone (O3). For that purpose more than 30 Egyptian species and cultivars were subjected to extensive screening studies under controlled environmental and pollutant exposure conditions to mimic the Egyptian environmental conditions and O3 levels in urban and rural sites. Four plant species were found to be more sensitive to O3 than the universally used O3-bioindicator, tobacco Bel W3, under the Egyptian environmental conditions used. These plant species, jute (Corchorus olitorius c.v. local), clover (Trifolium alexandrinum L. c.v. Masry), garden rocket (Eruca sativa c.v. local) and alfalfa (Medicago sativa L. c.v. local), ranked in order of decreasing sensitivity, exhibited typical O3 injury symptoms faster and at lower 03 concentrations than Bel W3. Three variables were tested in search of a reliable tool for the diagnosis and prediction of O3 response prior to the appearance of visible foliar symptoms: pigment degradation, stomatal conductance (g(s)) and net photosynthetic CO2 assimilation (Pnet). Pigment degradation was found to be unreliable in predicting species sensitivity to O3. Evidence supporting stomatal conductance involvement in 03 tolerance was found only in tolerant species. A good correlation was found between g(s), restriction of O3 and CO2 influx into the mesophyll tissues, and Pnet. Changes in Pnet seemed to depend largely on fluctuations in g(s).     

Carbon accounting model for forests in Australia

CAMFor (Carbon Accounting Model for Forests) is a sophisticated spreadsheet model developed to assist in carbon accounting and projection. This model can integrate information from a range of alternate sources including user input, default parameters and third party model outputs to calculate the carbon flows associated with a stand of trees and the wood products derived from harvests of that stand. Carbon is tracked in the following pools: * Biomass (stemwood, branches, bark, fine and coarse roots, leaves and twigs) * Soil (organic matter and inert charcoal) * Debris (coarse and fine litter, slash, below ground dead material) * Products (waste wood, sawn timber, paper, biofuel, reconstituted wood products). These pools can be tracked following thinning, fires and over multiple rotations. A sensitivity module has been developed to assist examination of the important assumptions and inputs. This paper reviews the functionality of CAMFor and reports on its use in a case study to explore the precision of estimates of carbon sequestration in a eucalypt plantation. Information on variability in unbiased models, measurement accuracy and other sources of error are combined in a sensitivity analysis to estimate the overall precision of sequestration estimates.