The effectiveness of lime-based amendments and bauxite residues at removing phosphorus from piggery effluent

Piggery effluent may contribute to the eutrophication of waterways, if it is not treated before disposal, because of high levels of phosphorus. Limes and red muds (a residue from bauxite refining) were used to remove phosphorus from piggery effluent (41 mg litre(-1) total P). Lime-based amendments were more effective than the red muds at removing phosphorus when compared at the same liquid: solid ratios. Based on laboratory data, the cost of treating effluent increased rapidly as the final required phosphorus concentration decreased to less than 4 mg litre(-1). Kiln dust was the cheapest amendment tested down to 2 mg litre(-1). Hydrated lime was able to clarify and flocculate the effluent to 1 mg litre(-1) within 60 min. The re-useability of all limes may be determined by a simple pH test. Red mud could be used to remove phosphorus when its pH was lowered to 6.0-6.5 and it is used at liquid:solid ratios <20:1.     

CARBON CONTENT OF SEDIMENTS OF SMALL RESERVOIRS1

ABSTRACT: Carbon content was measured in sediments deposited in 58 small reservoirs across the United States. Reservoirs varied from 0.2 to 4000 km2 in surface area. The carbon content of sediment ranged from 0.3 to 5.6 percent, with a mean of 1.9 ± 1.1 percent. No significant differences between the soil and sediment carbon content were found using a paired t-test or ANOVA. The carbon content of sediments in reservoirs was similar to the carbon content of surface soils (0–10 cm) in the watershed, except in watersheds with shrub or steppe (desert) vegetation. Based on the sediment accumulation rates measured in each reservoir, the calculated organic carbon accumulation rates among reservoirs ranged from 26 to 3700 gC m^-2yr^-1, with a mean of 675 ± 739 gC m^-2yr^-1. The carbon content and accumulation rates were highest in sediments from grassland watersheds. High variability was found in carbon content, carbon accumulation, and sediment accumulation rates due to individual watershed and reservoir characteristics rather than to any broad physiographic patterns. The carbon accumulation rates in these reservoir sediments indicate that reservoir sediments could be a significant sink for organic carbon.     

Sediment budgets and source determinations using fallout Cesium-137 in a semiarid rangeland watershed,Arizona, USA

Analysis of soil redistribution and sediment sources in semiarid and arid watersheds provides information for implementing management practices to improve rangeland conditions and reduce sediment loads to streams. The purpose of this research was to develop sediment budgets and identify potential sediment sources using ¹³⁷Cs and other soil properties in a series of small semiarid subwatersheds on the USDA ARS Walnut Gulch Experimental Watershed near Tombstone, Arizona, USA. Soils were sampled in a grid pattern on two small subwatersheds and along transects associated with soils and geomorphology on six larger subwatersheds. Soil samples were analyzed for ¹³⁷Cs and selected physical and chemical properties (i.e., bulk density, rocks, particle size, soil organic carbon). Suspended sediment samples collected at measuring flume sites on the Walnut Gulch Experimental Watershed were also analyzed for these properties. Soil redistribution measured using ¹³⁷Cs inventories for a small shrub-dominated subwatershed and a small grass-dominated subwatershed found eroding areas in these subwatersheds were losing −5.6 and −3.2 t ha⁻¹ yr⁻¹, respectively; however, a sediment budget for each of these subwatersheds, including depositional areas, found net soil loss to be −4.3 t ha⁻¹ yr⁻¹ from the shrub-dominated subwatershed and −0.1 t ha⁻¹ yr⁻¹ from the grass-dominated subwatershed. Generally, the suspended sediment collected at the flumes of the six other subwatersheds was enriched in silt and clay. Using a mixing model to determine sediment source indicated that shrub-dominated subwatersheds were contributing most of the suspended sediment that was measured at the outlet flume of the Walnut Gulch Experimental Watershed. The two methodologies (sediment budgets and sediment source analyses) indicate that shrub-dominated systems provide more suspended sediment to the stream systems. The sediment budget studies also suggest that sediment yields measured at the outlet of a watershed may be a poor indicator of actual soil redistribution rates within these semiarid watersheds. Management of these semiarid rangelands must consider techniques that will protect grass-dominated areas from shrub invasion to improve rangeland conditions.     

‘A system that works for the sea’? Exploring Stakeholder Engagement in Marine Spatial Planning

This paper aims to contribute to the current debate on Marine Spatial Planning (MSP) by exploring the issue of stakeholder engagement. MSP is an emergent policy field that is subject to an increasing body of research, yet the role, scope and nature of participatory engagement within the process remains a neglected topic. This paper briefly reviews the nature of the ‘marine problem’, to which MSP is seen to be the response and describes the emergence of MSP policy in the UK with specific emphasis on participatory aspects. Drawing on the experience of terrestrial planning it discusses the potential benefits of stakeholder engagement in MSP and highlights some of the key issues that need to be taken into account when shaping stakeholder input into the process. It then goes on to describe the findings from a series of interviews with key stakeholders in the Irish Sea Region, which suggest that we need to develop a more critical and deeper understanding of how various interests frame the ‘marine problem’, and how they see their role in shaping the form of the MSP process. This highlights the importance of encouraging stakeholder involvement in MSP, the need to develop a shared vision of a ‘sea interest’. Priorities are then set for research to support this important policy agenda.     

A COMPARISON OF THREE METHODS FOR MEASURING RECENT RATES OF SEDIMENT ACCUMULATION1

ABSTRACT: The determination of sediment accumulation rates is important in understanding how these materials are affecting lakes and reservoirs ecosystems. In this study three methods were used to estimate sediment accumulation rates in the impounded backwater lakes behind Lock and Dam Nos. 8 and 9 on the upper Mississippi River. The three methods were: 1) a “spud” survey, 2) a survey of bottom contours, and 3) the use of fallout cesium-137. The field use of these three methods of determining sediment accumulation and the potential errors and merits involved in each method are discussed. The results from the field study in backwater areas along the upper Mississippi River showed the survey of bottom contour method gave the lowest rate of sediment deposition and the ¹³⁷Cs method gave the highest rates. Sediment accumulation rates from 0 to 7.8 cm per year were measured in the study area. All three methods are useful and have unique characteristics for determining rates and patterns of sediment accumulation. Thus the choice of a method to be used in a sediment survey is dependent on the type of information needed and the time available.     

Enhanced removal of heavy metals in primary treatment using coagulation and flocculation.

The goal of this study was to determine the removal efficiencies of chromium, copper, lead, nickel, and zinc from raw wastewater by chemically enhanced primary treatment (CEPT) and to attain a total suspended solids removal goal of 80%. Operating parameters and chemical doses were optimized by bench-scale tests. Locally obtained raw wastewater samples were spiked with heavy metal solutions to obtain representative concentrations of metals in wastewater. Jar tests were conducted to compare the metals removal efficiencies of the chemical treatment options using ferric chloride, alum, and anionic polymer. The results obtained were compared with those from other studies. It was concluded that CEPT using ferric chloride and anionic polymer is more effective than CEPT using alum for metals removal. The CEPT dosing of 40 mg/L ferric chloride and 0.5 mg/L polymer enhanced heavy metals removal efficiencies by over 200% for chromium, copper, zinc, and nickel and 475% for lead, compared with traditional primary treatment. Efficient metals capture during CEPT can result in increased allowable headworks loadings or lower metal levels in the outfall.