Interpretation of heavy metal data from mussel by use of multivariate classification techniques

Different strategies of multivariate analysis of metals concentrations (Mn, Fe, Ni, V, Co, Cu, Cd, Hg, Pb, Na, K) in mussel samples from different spanish markets are used to interpret a data base and identify differences between species and origin of the samples. Principal Component Analysis and Potential curves are applied to properly classify unknown samples from representative mussels samples (Mytilus edulis and Perna canaliculus). Also, Principal Components Analysis is used as display method to visualize the relation between the variables and objects of interest.     

Environmental impact of unleaded gasolines in the bay of Cádiz (Spain)

Given the strategic situation of the José León de Carranza bridge, which spans the Bay of Cádiz (in the SW of Spain) and carries very heavy motor traffic, together with knowledge of the currents and tidal flows in the zone, we have used a technique of radioactive dating of sediments to study the temporal evolution presented by contamination from lead in the sediment column. This has allowed us to observe the environmental impact, in terms of the concentration of Pb in the sea bed sediments, that has been produced in the zone by the introduction of unleaded gasolines as substitutes for traditional automobile fuels that employ organic forms of tetra methyl lead as an antidetonant agent in the fuel.     

Assessment of contamination by heavy metals and petroleum hydrocarbons in sediments of Montevideo Harbour (Uruguay)

As part of the first environmental assessment within Montevideo Harbour, in summer and winter of 1998, sediments samples were collected at eight locations to determine the spatial distribution of anthropogenic pollutants. Muddy sediments with high organic matter content dominate the study area. Heavy metal levels indicated that sediments were highly polluted with Zn (overall mean: 312+/-102 microg g(-1) dry sediment), Pb (85+/-31), Cu (89+/-25), Cr (162+/-62), and Hg (0.63+/-0.3) and moderately with Ni (30+/-2) and Ag (1.2+/-0.4). Depending on location and season, aliphatic hydrocarbons reached from 21 to 120 microg g(-1), while the unresolved complex mixture represented up to 76% of the total aliphatic fraction. Total PAH concentrations ranged from 1.56 to 90.44 microg g(-1); except at one location, petroleum derivatives were identified as main local source. The results pointed out that almost all the harbour area presented some substances that can cause adverse biological effects, especially in the inner region where all metals are above PEL levels. Principal components analysis confirmed that the inner harbour region is most severely affected by the pollutants and it was possible to differentiate three regions according to their environmental quality.     

Uranium-238 and thorium-232 series concentrations in soil, radon-222 indoor and drinking water concentrations and dose assessment in the city of Aldama, Chihuahua, Mexico

High-resolution gamma spectrometry was used to determine the concentration of 40K, 238U and 232Th series in soil samples taken from areas surrounding the city of Aldama, in Chihuahua. Results of indoor air short-time sampling, with diffusion barrier charcoal detectors, revealed relatively high indoor radon levels, ranging from 29 to 422 Bq/m3; the radon concentrations detected exceeded 148 Bq/m3 in 76% of the homes tested. Additionally, liquid scintillation counting showed concentrations of radon in drinking water ranging from 4.3 to 42 kBq/m3. The high activity of 238U in soil found in some places may be a result of the uranium milling process performed 20 years ago in the area. High radon concentrations indoor and in water may be explained by assuming the presence of uranium-bearing rocks underneath of the city, similar to a felsic dike located near Aldama. The estimated annual effective dose of gamma radiation from the soil and radon inhalation was 3.83 mSv.     

Polychlorinated dibenzo-p-dioxins and dibenzofurans in River Po sediments

The River Po is the main Italian river draining one of the most populated and industrialised regions in Italy. As part of a monitoring project to assess environmental quality in the River Po, we measured the concentrations of polychlorinated dibenzo-p-dioxins (PCDDs) and dibenzofurans (PCDFs) in bottom sediments collected along the whole course of the river, from the spring to the delta, downstream from the confluence of its main tributaries. The aim was to investigate the level of contamination in the main Italian river and the contribution of contaminant loads from the subbasins. Composite sediment samples were collected in summer and winter surveys in low-flow water conditions and analysed by HRGC-HRMS for PCDD and PCDF homologue groups and for the 2,3,7,8-substituted congeners. The spatial trend observed in the Po River for PCDD and PCDF concentrations varied depending on the load of contaminants received from the tributaries and the processes of sedimentation. The sum of PCDD and PCDF concentrations, and the toxic equivalent content, ranged from 121 to 814 and from 1.3 to 13 ng/kg dry weight sediment, respectively. These levels of contamination seem lower than in the sediments of rivers draining highly industrialised areas. The PCDD and PCDF homologue profiles in all the samples were very similar, suggesting a common source of this contamination in the River Po. Principal component analysis suggested that widespread sources, such as urban runoff and domestic wastewaters, are probably the main cause of these levels of PCDDs and PCDFs.     

São Paulo Aerosol Characterization Study

Abstract

The São Paulo Metropolitan area (SPMA) is characterized as having one of the worst air pollution problems in Brazil,with frequent violations of air quality standards for particulate matter. This paper presents the results of a eceptor model source apportionment study carried out to develop a quantitative database on which a control strategy could be developed. The study was conducted in four sites with distinct land uses. Fine, coarse (CP), and total suspended particles (TSP) samples were collected on Teflon and glass filters and analyzed by x-ray fluorescence XRF), ion chromatography, and thermal evolution. The sources were characterized by similar methodology. Chemical mass balance (CMB) receptor modeling indicated that carbonaceous material plays an important role in the aerosol composition; that the three major source categories contributing to the fine particles are vehicles, secondary carbon, and sulfates; and that the main contributors to CP and TSP are road dust and vehicles. All sampling sites presented the same general pattern in terms of source contribution, although this contribution varied from site to site.     

Does ISO 14001 work in Brazil?

As a result of increasing global awareness about the importance of the environment, depletion of natural resources and legal pressures for companies to manage their processes in a sustainable manner, ISO 14001 systems have been gaining increasingly more importance in the organizational scenario. These elements are even more critical in emerging nations due to less awareness and fewer demands by governments and the population in relation to environmental issues. Therefore, the main objective of this study is to verify the benefits and difficulties of Environmental Management Systems based on ISO 14001 at industries in the state of São Paulo – Brazil (an emerging country) by conducting a survey to subsidize the proposal for actions in the public, academic and private sectors to promote the use of this standard of reference and strengthen its results in Brazil. A questionnaire was sent to 194 companies from the National Institute of Metrology, Standardization and Industrial Quality database. 69 answered, representing a return rate of 35.36%. The main benefits identified are related to the development of preventive environmental actions, reduction in the consumption of power, water, gas and fuel oil, and a positive influence on other internal management processes. The main difficulties are related to cost increases from ISO 14001 management systems and the constant changes in environmental legislation in Brazil. Some actions are proposed at the end of the analyses to intensify the use and improve the results of this standard, such as changes in government legislation and its collective development and implementation in industries.     

Stabilization/solidification of ashes in clays used in the manufacturing of ceramic bricks.

This paper presents the results of the lixiviation of metals from different mixtures of fly and bottom ashes that have been stabilized and solidified in clays used in the manufacture of bricks. The ashes used for this study were obtained from a Hoffmann-type brick furnace adapted for the incineration of municipal solid waste during the manufacturing of ceramic bricks. The ashes were stabilized in clay in different proportions of clay:ash mix (99:1, 95:5, 90:10, 80:20 and 60:40). Such mixes were used to manufacture bricks that were calcined at a temperature ranging from 50 to 1100 degrees C. The clay, ashes and manufactured bricks were characterized using X-ray diffraction, fluorescent X-ray, thermogravimetry, differential thermal analysis, atomic absorption spectroscopy and scanning electronic microscopy. In addition, toxicity characteristic leaching procedure lixiviation tests were performed according to the EPA 1311 method for the determination of heavy metals. The results showed an affinity between clay and ash, and also that the bricks manufactured with these mixtures present low lixiviation levels. The tests also showed the highest decrease in the concentration of arsenic, nickel, chromium, zinc and silver for 99:1 mixtures. The 95:5 mixture was found to be the most favourable for the stabilization (greater concentration decrease) of lead and cadmium. Selenium was the metal with the lowest concentration change whereas arsenic, nickel, chromium, zinc and cadmium showed the greatest concentration change in all mixtures, with the exception of cadmium in the mixture 99:1.