Influence of RFID tags on recyclability of plastic packaging

The use of Radio Frequency IDentification Technology (RFID) in the packaging sector is an important logistical improvement regarding the advantages offered by this technology in comparison with barcodes. Nevertheless, the presence of these devices in plastic packaging, and consequently in plastic waste, can cause several problems in the recycling plants due to the materials included in these devices.In this study, the mentioned recycling constraints have been experimentally identified in a pilot scale recycling study consisting in three recycling tests with an increasing presence of RFID tags. Differences in each test were evaluated. Furthermore, the quality of the recycled material of each test was studied through the injection and testing of tests probes.The results of the pilot scale recycling tests did not show a decrease in the quality of the recycled plastic due to the presence of RFID tags. Nevertheless, several operational problems during the recycling process were observed such as the obstruction of the screens, which lessened the process yield and created process interruptions, as well as the loss of extruded plastic during the process.These recycling constraints cannot be directly extrapolated to the industrial plants due to the different working scales. Nevertheless, technological solutions are proposed in order to avoid these recycling constraints if they appear.     

Stabilization/solidification of fly ashes and concrete production from bottom and circulating ashes produced in a power plant working under mono and co-combustion conditions

Two combustion tests were performed in a fluidized bed combustor of a thermo-electric power plant: (1) combustion of coal; (2) co-combustion of coal (68.7% w/w), sewage sludge (9.2% w/w) and meat and bone meal (MBM) (22.1% w/w). Three samples of ashes (bottom, circulating and fly ashes) were collected in each combustion test. The ashes were submitted to the following assays: (a) evaluation of the leaching behaviour; (b) stabilization/solidification of fly ashes and evaluation of the leaching behaviour of the stabilized/solidified (s/s) materials; (c) production of concrete from bottom and circulating ashes. The eluates of all materials were submitted to chemical and ecotoxicological characterizations. The crude ashes have shown similar chemical and ecotoxicological properties. The s/s materials have presented compressive strengths between 25 and 40 MPa, low emission levels of metals through leaching and were classified as non-hazardous materials. The formulations of concrete have presented compressive strengths between 12 and 24 MPa. According to the Dutch Building Materials Decree, some concrete formulations can be used in both scenarios of limited moistening and without insulation, and with permanent moistening and with insulation.     

Identifying different types of bulking in an activated sludge system through quantitative image analysis

The present study proposes an image analysis methodology for the identification of different types of disturbances in wastewater treatment activated sludge systems. Up to date, most reported image analysis methodologies have been used in activated sludge processes with the aim of filamentous bulking detection, however, other disturbances could be foreseen in wastewater treatment plants. Such disturbances can lead to fluctuations in the biomass contents, affecting the mixed liquor suspended solids (MLSS), and in the sludge settling ability, affecting the sludge volume index (SVI). Therefore, this work focuses on predicting the MLSS and SVI parameters for different types of disturbances affecting an activated sludge system. Four experiments were conducted simulating filamentous bulking, zoogleal or viscous bulking, pinpoint floc formation, and normal operating conditions. Alongside the MLSS and SVI determination, the aggregated and filamentous biomass contents and morphology were studied as well as the biomass Gram and viability status, by means of image analysis.     

Environmental mutagenicity and toxicity caused by sodium metabisulfite in sea shrimp harvesting in Piauí, Brazil

Sodium metabisulfite is used in marine shrimp harvesting to prevent the occurrence of black spots. Shrimps are soaked in a sodium metabisulfite solution in ice, which is disposed of in sewages that run into marine canals, creating an environmental hazard. This study evaluates the toxicity and mutagenicity caused by sodium metabisulfite in sea waters and sediments collected in a shrimp farm in Cajueiro da Praia (Luis Correia), state of Piauí, Brazil, using the Allium cepa assay. Water and sediment samples were collected in the dry and in the rainy seasons, in three sites: upstream the shrimp farm (Site 1), at the point sodium metabisulfite is discharged (Site 2), and 100 m downstream the farm (Site 3). Three sample dilutions were used (50%, 25% and 10%) for all samples. A negative control (well water) and a positive control (copper sulfate 0.0006 mg mL⁻¹) were used in each experiment. At the end of the 72-h exposure period, onion roots were measured and removed. Mutagenicity analysis included the determination of mitotic index, chromosomal aberrations and the detection of micronuclei; analysis of root size and mitotic index were used as an index of toxicity. The A. cepa assay revealed that the water and sediments samples collected in the Piauí coast contaminated with sodium metabisulfite induce toxicity. The results demonstrate that the assay may be used as a regular tool in the analysis of water parameters in shrimp farms in the coast of Piauí state, and in strategies to preserve the region’s marine ecosystem.     

Effects of tertiary treatment by fungi on organic compounds in a kraft pulp mill effluent

Background, aim and scope  

Pulp and paper mills generate a plethora of pollutants depending upon the type of pulping process. Efforts to mitigate the environmental impact of such effluents have been made by developing more effective biological treatment systems in terms of biochemical oxygen demand, chemical oxygen demand, colour and lignin content. This study is the first that reports an evaluation of the effects of a tertiary treatment by fungi (Pleurotus sajor caju, Trametes versicolor and Phanerochaete chrysosporium and Rhizopus oryzae) on individual organic compounds of a Eucalyptus globulus bleached kraft pulp and paper mill final effluent after secondary treatment (final effluent).     

Is Arenicola marina a suitable test organism to evaluate the bioaccumulation potential of Hg, PAHs and PCBs from dredged sediments?

This paper presents the results of investigations on the suitability of lugworms (Arenicola marina) to study the bioaccumulation potential of Hg, PCB and PAH compounds from dredged sediments upon laboratory exposure. The results of tissue concentrations for several sediments from Spanish ports showed that it is possible to identify increased levels of contaminants in lugworms just after 10 days of exposure although different bioaccumulation trends were shown amongst compounds and sediments. Total and organic Hg compounds were accumulated following a non-linear trend, with a sharp increase of tissue concentrations in lugworms exposed to levels of contamination associated to a significant increase in mortality. Interestingly organic Hg compounds accounted for an average of 40% of the total Hg in lugworms exposed to sediments presenting sublethal concentrations while, when exposed to sediments presenting lethal concentrations, organic Hg compounds only accounted for 4% of the total Hg accumulated in lugworms. While lugworms seem to readily accumulate Hg and PCB compounds, with some variability explained by the organic matter content in sediments or other factor for which it accounts for, the results for PAHs suggest a more complex process of bioaccumulation as no relationship was observed between the measured concentrations in sediments and in lugworms, not even after correcting the results for this factor. Besides, the differences in the calculated BSAFs for each compound and for each sediment supported the use of bioassays for evaluating the bioaccumulation potential of sediment-bound contaminants as part of the assessment framework required in pre-dredging investigations, as they still offer unique information about the bioavailability of sediment-bound contaminants.     

Evaluation of stream ecological integrity using litter decomposition and benthic invertebrates

Biomonitoring programs to access the ecological integrity of freshwaters tend to rely exclusively on structural parameters. Here we evaluated stream ecological integrity using (a) benthic macroinvertebrate derived metrics and a biotic index as measures of structural integrity and (b) oak litter decomposition and associated fungal sporulation rates as measures of functional integrity. The study was done at four sites (S1, S2, S3 and S4) along a downstream increasing phosphorus and habitat degradation gradient in a small stream. The biotic index, invertebrate metrics, invertebrate and fungal communities' structure and sporulation rates discriminated upstream and downstream sites. Decomposition rates classified sites S4 and S2 as having a compromised ecosystem functioning. Although both functional and structural approaches gave the same results for the most impacted site (S4), they were complementary for moderately impacted sites (S2 and S3), and we therefore support the need for incorporating functional measures in evaluations of stream ecological integrity.     

Depuration of PCBs and DDTs in mullet under captivity clean conditions

Contaminated mullet (Mugil cephalus) from Douro estuary was allowed to depurate in clean water and fed with uncontaminated food. Levels of PCBs and DDTs in muscle and liver, and ethoxyresorufin O-deethylase (EROD) activity were measured at day 0, 21, 120 and 270. In specimens captured in the estuary total PCB and total DDT concentrations were 311 and 65 ng g(-1) in muscle and 686 and 115 ng g(-1) in liver, respectively. At day 21, after an initial 10-15 days period of starvation, organochlorines levels increased in both analyzed tissues. Thereafter levels of all PCB congeners and DDT compounds decreased in muscle, and at the end of the 270 days were 49 ng g(-1) and 13 ng g(-1), respectively. These decreases were correlated to the lipids consumption. In liver no relationship between those variables was observed, suggesting different elimination processes and eventual exchange of contaminants between muscle and liver. EROD activities decreased in the first days of depuration experiment, but showed no relations with analysed organochlorines.     

Evaluation of genotoxicity and toxicity of water and sediment samples from a Brazilian stream influenced by tannery industries

This paper reports results of genotoxicity and toxicity studies of water and sediment samples collected from the Estancia Velha stream of southern Brazil, a stream transporting both domestic sewage and effluents from regional factories working in the leather industry. Three sites were selected: in the stream headwaters (Site 1), located downstream of an urban area (Site 2), and near the basin outfall (Site 3). Results obtained with Allium cepa showed no evidence of chromosomal mutation, either in water or in sediment, during winter or summer seasons, but samples collected below Site 1 showed high toxicity. Physical and chemical analyses showed high concentrations of pollutants at these sites. Ecotoxicity tests with Daphnia magna and Ceriodaphnia dubia measured toxicity in water from Sites 2 and 3 in summer 2004. A toxic effect on Hyalella azteca was only found in sediment from Site 3 during winter 2003 and summer 2004. The results suggest that the synergy among different compounds in domestic and industrial sewage discharges can make it difficult to maintain system stability.     

Ozone stress and antioxidant substances in Trifolium repens and Centaurea jacea leaves

Ozone-sensitive (NC-S clone) and resistant plants (NC-R clone) of Trifolium repens and Centaurea jacea were exposed to moderate ozone concentrations in ambient air. The aim of this study was the investigation of the relation between ozone-sensitivity and leaf concentrations of antioxidants (ascorbic acid, total phenolics and total antioxidant capacity). NC-R clone showed the highest concentrations of antioxidants with 50-70% more ascorbic acid than NC-S. NC-R had about 5 times more ascorbic acid in the young leaves and 9 times more in the old leaves than Centaurea. In a fumigation experiment with acute ozone stress (100 nl L(-1)) the antioxidant levels changed profoundly. The ozone-injured leaves of NC-S had 6-8 times more total phenolics than uninjured leaves. Generally older leaves had lower antioxidant concentrations and were more prone to ozone injury than younger leaves. Ascorbic acid concentrations were closer related to the appearance of visible ozone injury than the other antioxidative parameters.