Assessment of commercially available polymeric materials for sorptive microextraction of priority and emerging nonpolar organic pollutants in environmental water samples

Among the different organic pollutants, persistent organic pollutants and emerging organic contaminants (EOCs) are of particular concern due to their potentially dangerous effects on the ecosystems and on human health. In the framework of the analysis of some of these organic pollutants in water samples, sorptive extraction devices have proven to be adequate for their monitoring. The efficiency of four commercially available and low-cost polymeric materials [polypropylene, poly(ethylene terephthalate), Raffia, and polyethersulfone (PES)] for the simultaneous extraction of 16 organic compounds from five different families from environmental water samples was evaluated in this work. Firstly, the homogeneity of the sorbent materials was confirmed by means of Raman spectroscopy. After the optimization of the parameters affecting the extraction and the liquid desorption steps, it was found that PES showed the largest efficiencies for slightly polar analytes and, to a lesser extent, for nonpolar analytes. Additionally, Raffia rendered good extraction efficiencies for nonpolar compounds. Thus sorptive extraction methods followed by large volume injection-programmable temperature vaporizer-gas chromatography-mass spectrometry were validated using PES and Raffia as sorbent materials. The validation of the method provided good linearity (0.978?r ²?r ²?-1 level). Finally, these materials were applied to the analysis of contaminants in environmental water samples.     

Towards a sustainable energy future—exploring current barriers and potential solutions in Thailand

Renewable energy is considered an indispensable basis of sustainable energy systems as electricity generation from renewable sources results in low emissions of greenhouse gases compared to fossil fuel based electricity and contributes to sustainable development. However, effective strategies and conducive institutional settings are needed for advancement of such clean electricity systems. Although Thailand, as a nation, has a huge potential for renewable energy utilization, its total amount of electricity generation from renewables is relatively small and could be enlarged substantially. Lack of policy mechanisms, institutional development and financing exist as major barriers for Thailand in this regard. Investigation of the nation’s current energy strategy implementation shows that relevant energy and development policies are at different stages of implementation and institutional settings are continuously evolving. This paper argues that further significant efforts could be made towards advancement of renewable electricity and thus achievement of energy sustainability in Thailand. Resource planning, effective policy and institutions, focussed planning for energy sustainability and implementation of the Clean Development Mechanism (CDM) under the Kyoto Protocol could facilitate further advancement of renewables for the nation.     

Biochemical and lysosomal biomarkers in the mussel <Emphasis Type="Italic">Mytilus galloprovincialis</Emphasis> from the Mar Piccolo of Taranto (Ionian Sea,Southern Italy)

Biomarkers are internationally recognized as useful tools in marine coastal biomonitoring, in particular, as early-warning signals at the level of individual organisms to assess biological effects of pollutants and other stressors. In the present study, Mytilus galloprovincialis has been employed as a sentinel organism to assess biological pollution effects in the Mar Piccolo of Taranto (Southern Italy), a coastal lagoon divided into two small inlets, connected to the open sea through one natural and one artificial narrow openings. Mussels were collected in June 2013 at three sites located within each of the two inlets of the Mar Piccolo. Biological effects were investigated through a suite of biomarkers suitable to reflect effects and/or exposure to contaminants at biochemical and cellular levels. Biochemical biomarkers included glutathione-S-transferase (GST) and acetylcholinesterase (AChE) enzyme activities; as histochemical biomarkers, lysosomal membrane stability, lipofuscin and neutral lipid accumulation, and lysosomal structural changes were considered. As a whole, results highlighted differences among the three study sites, particularly for GST, AChE, and lipofuscins, which are consistent with the variations of the chemical pollutants in sediments. The applied biomarkers showed that a stress syndrome likely to be ascribed to environmental pollutants is occurring in mussels living in the Mar Piccolo of Taranto, in particular, the ones inhabiting the first inlet.     

Australia and Russia: How do their environmental policy processes differ?

This paper focuses on comparative review and analysis of the systems of environmental protection, national environmental strategies and fundamentals of environmental legislation in Australia and the Russian Federation. These countries have many socioeconomic similarities, such as low population densities and richness in natural resources which are largely exported. The main disparity between Australia and Russia is in the types of economy. This paper ‘continues’ the sequence of recent scholarly publications on comparison of various features of environmental policies in the countries from all over the world. Comparative analysis in this research has been based on examination of scholarly publications, legislation, government documents, mass media sources and NGO responses. The analysis has revealed a number of differences including top-down implementation of policies in Russia whereas in Australia, each State (Territory) implements policies with significant independence from the Commonwealth Government. At the same time, similarities between the countries have been identified: for example, in deficits in the budget of local environmental authorities and in the presence of contradictions in legislation at national and regional levels of government. Suggestions resulting from this analysis include further integration of sustainable development strategies at all levels of Australian government to encourage further protection of the environment and, for Russia, creating a separate Ministry of Environmental Protection. These approaches should assist facilitation of sustainable development for both nations. Readers should send their comments on this paper to: BhaskarNath@aol.com within 3 months of publication of this issue.     

Sustainability Assessment for Agriculture Scenarios in Europe’s Mountain Areas: Lessons from Six Study Areas

Sustainability assessment (SA) is a holistic and long-range strategic instrument capable of assisting policy-making in electing, and deciding upon, future development priorities. The outcomes of an SA process become more relevant and strengthened when conducted with multi-stakeholder engagement, which provides for multiple dialogues and perspectives. This was the object of research of the SA team in the context of BioScene (Scenarios for Reconciling Biodiversity Conservation with Declining Agriculture Use in Mountain Areas in Europe), a three-year project (2002–2005) funded by the European Union 5th Framework Program, which aimed to investigate the implications of agricultural restructuring and decline for biodiversity conservation in the mountain areas of Europe, using three distinct methodological streams: the ecological, the socio-economic, and the SA approaches. The SA approach drew on the previous two to assess the importance for biodiversity management of different scenarios of agri-environmental change and rural policy in six countries (France, Greece, Norway, Slovakia, Switzerland, and the United Kingdom), develop causal chains, include stakeholder views, and identify potential contributions for, or conflicts with, sustainability. This article tells how SA was used, what sustainability meant in each study area through different objectives of sustainability considered, discusses the methods used in SA, and the benefits arising. The SA was conducted by a team independent of any study area, who developed and oversaw the application of the SA methodology, assisting national teams, and developing a cross-country understanding of the sustainability of proposed scenarios in the different geographical and social contexts, and their implications for policy-making. Finally, it reflects on the persistent challenges of interdisciplinary research, compounded by multi-cultural teams, and concludes on the BioScene’s lessons for the further development and application of SA.

Cost optimization of integrated wastewater drainage and treatment systems

This paper presents the cost optimization of an urban drainage and wastewater treatment system. The mixed sewer urban drainage (including combined sewer overflows and retention basins), the activated sludge wastewater treatment plant (WWTP), and the permissible loading of the receiving water were optimized simultaneously by the nonlinear programming approach. For this purpose, the integrated optimization model OPTIMALWWT was developed. The economic objective function of the defined investment and operational costs is subjected to rigorous design and ecological constraints. A practical example of the cost optimization of an existing urban drainage and WWTP, located in Slovenia, is presented to demonstrate the efficiency of the proposed method. For each of the two different design approaches, three different optimization cases were carried out for three different technological alternatives. As a result, the optimal technological process was finally selected for the reconstruction of the system, as a result of its suitable costs and operational safety.     

A method for measuring dermal exposure to multifunctional acrylates

UV-curable acrylates are used increasingly for coating wood surfaces in the furniture industry. One of the active components, tripropylene glycol diacrylate (TPGDA), is known to be both an allergen and irritant to the skin. Methods to measure dermal exposure to skin irritants and allergens, such as acrylates, are insufficient for exposure assessment and there is none for this compound. The aim of this investigation was to develop a skin and surface sampling method, based on tape stripping, and a gas chromatographic method for quantitative analysis for assessing occupational skin exposure to multifunctional acrylates. Twelve adhesives were tested for their efficiency to remove TPGDA and UV-coating from a glass surface, the skin of guinea pigs and human volunteers employing the tape-stripping method in order to find the best performing tape. Variables that affect removal efficiency such as the applied dose and its retention time on the skin, tape adhesion time on the skin, and the number of strippings required to detect the contaminant from the skin were studied. Fixomull tape performed the best during sampling and analysis and had the most consistent removal efficiencies for the studied substances. The average removal efficiency with a single stripping at the 2 microliters TPGDA exposed skin sites was 85% (RSD = 14.1), and for UV-resin exposed sites 63% (RSD = 20.2). The results indicated that this method can be used for measuring dermal exposure to multifunctional acrylates efficiently, accurately, and economically. This method provides a sensitive and powerful tool for the assessment of dermal exposure to multifunctional acrylates both from the skin and from other contaminated surfaces in occupational field settings.     

An assessment of Spain's Programa AGUA and its implications for sustainable water management in the province of Almería, southeast Spain

Spain's Programa AGUA was proposed in 2004 as a replacement for the Spanish National Hydrological Plan and represented a fundamental policy shift in national water management from large inter-basin water transfers to a commitment to desalination. Twenty-one desalination facilities are planned for six provinces on the Spanish Mediterranean coast to supplement their water needs. These include the province of Almería that for the last 30 years has endured a net water abstraction overdraft leading to serious reservoir depletion and groundwater imbalances. Rising water use is a result of increasing demand to support irrigated agriculture (e.g. greenhouse horticulture) and for domestic needs (e.g. rapid urban growth and tourism development), which has led observers to question Almería's long-term water sustainability. Desalinated water alone is unlikely to be sufficient to make up these water deficits and water-users will have to accept a move to full-price water recovery by 2010 under the European Union (EU) Water Framework Directive of which Spain is a signatory. Anticipated water efficiencies resulting from higher water tariffs, increasing water reuse and water infrastructure improvements (including inter-basin transfers), in conjunction with increasing use of desalinated water, are expected to address the province's current water overdraft. However, Almería will need to balance its planned initiatives against long-term estimates of projected agricultural and domestic development and the environmental consequences of adopting a desalination-supported water future.     

High surface area materials prepared from sewage sludge-based precursors

This paper focuses on physical activation (CO2) and chemical activation (H3PO4, NaOH and KOH) of sewage sludge-based precursors. Our results show that (i) a simple acid washing treatment leads to a significant increase in the adsorption capacity of some precursors; (ii) under the experimental conditions tested, CO2 physical activation and chemical activation with H3PO4 were ineffective for an efficient porosity development and (iii) choosing an appropriate protocol, it is possible to obtain highly porous materials (700-1700 m2 g(-1)) by chemical activation of sludge-based precursors with alkaline hydroxides. The efficiency of the chemical activation with NaOH or KOH is very much influenced by the method used for mixing the activating agent and the precursor. The BET values of the materials obtained when physically mixing ground hydroxides with the precursor almost doubled the values obtained if other mixing methods are employed. Increasing the hydroxide:precursor ratio leads to an enhancement of the adsorption capacity of the adsorbents, with BET values ranging from 689 to 1224 m2 g(-1) for NaOH activation and from 853 to 1686 m2 g(-1) for KOH activation.