Dry reforming of methane to syngas: a potential alternative process for value added chemicals—a techno-economic perspective

During the past decade, there has been increasing global concern over the rise of anthropogenic CO₂ emission into the Earth’s atmosphere (J Air Waste Manage Assoc 53:645–715, 2003). The utilization of CO₂ to produce any valuable product is need of the hour. The production of syngas from CO₂ and CH₄ seems to be one of the promising alternatives in terms of industrial utilization, as it offers several advantages: (a) mitigation of CO₂, (b) transformation of natural gas and CO₂ into valuable syngas, and (c) producing syngas with H₂/CO ratio 1 which may further be used for the production of valuable petrochemicals (J Air Waste Manage Assoc 53:645–715, 2003). A conceptual design for the production of synthesis gas by dry reforming of methane is presented here. An economic assessment of this process with an integrated methanol production section as a case was conceptualized and compared with the conventional steam methane reforming route to produce methanol. The economic study indicated that dry reforming of natural gas/methane is a competitive process with lower operating and capital costs in comparison with steam reforming assuming negligible cost of CO₂ import.     

Five reasons why it is difficult to talk to Australian farmers about the impacts of,and their adaptation to,climate change

Some recent funding programmes in Australia on climate adaptation have expected active engagement with farmers in research projects. Based on our direct experience with 30 farmers and their advisors, we list five reasons why it is difficult to gain traction with farmers in discussing the likely impacts of climate change on their farms and the possible adaptation options they should be considering in preparation for a future changed climate. The reasons concern the slow and uncertain trajectory for changes in climate relative to the time horizon for farm decision-making, when set against short-term fluctuations in weather, prices, costs and government policy. Farmers have optimism for ongoing technological progress keeping abreast of any negative impacts of climate on their production. As one moves from incremental to transformational adaptation options, biophysical research has less to offer because decisions become based more on business structure, portfolio management, off-farm investments and geographical diversification. Some farmers also doubt the intentions of climate change researchers and are wary of anything they may have to offer. We propose there is an actionable decision space where agricultural science and economics can contribute to meaningful analysis of impacts and adaptation to climate change by farmers. This will involve emphasising the principles of farm management rather than defining optimal farm plans; the use of scenario planning to explore possible futures in a turbulent environment for farming; a focus on short-term adjustments as a path to longer term adaptation; re-gaining the trust of some farmers towards climate change scientists through better communication strategies; and understanding the linkages between adaptation options and enabling factors and technologies.     

Connecting the dots: mapping habitat connectivity for tigers in central India

Large connected landscapes are paramount to maintain top predator populations. Across their range, tiger (Panthera tigris) populations occur in small fragmented patches of habitat, often isolated by large distances in human-dominated landscapes. We assessed connectivity between 16 protected areas (PAs) in central India, a global priority landscape for tiger conservation, using data on land use and land cover, human population density, and transportation infrastructure. We identified and prioritized movement routes using a combination of least-cost corridor modeling and circuit theory. Our analyses suggest that there are several opportunities to maintain connectivity in this landscape. We mapped a total of thirty-five linkages in the region and calculated metrics to estimate their quality and importance. The highest quality linkages as measured by the ratio of cost-weighted distance to Euclidean distance are Kanha–Phen/Bandhavgarh–SanjayGhasidas/Melghat–Satpura, and cost-weighted distance to least-cost path length are Nawegaon–Tadoba/Achanakmar–SanjayGhasidas/Kanha–Phen. We used current flow centrality to evaluate the contribution of each PA and linkage toward facilitating animal movement. Values are highest for Kanha and Pench tiger reserves, and the linkages between Kanha–Phen, Kanha–Pench, and Pench–Satpura, suggesting that these PAs and linkages play a critical role in maintaining connectivity in central India. In addition, smaller areas such as Bor, Nawegaon, and Phen have high centrality scores relative to their areas and thus may act as important stepping stones. We mapped pinch points, which are sections of the linkages where tiger movement is restricted due to unfavorable habitat, transportation networks, human habitation, or a combination of factors. Currently, very limited data exist on tiger movement outside of PAs to validate model results. Regional-scale connectivity mapping efforts can assist managers and policy makers to develop strategic plans for balancing wildlife conservation and other land uses in the landscape.     

Study of two species prey-predator model in imprecise environment with MSY policy under different harvesting scenario

Parameters involve in various ecological models are mostly uncertain due to ever changing characteristic of nature. This article, deals with a basic predator–prey model where ecological parameters are considered as parametric-functional nature of interval numbers. The dynamical behaviors of the model system have been discussed in the imprecise environment. Moreover, the concept of maximum sustainable yield (MSY) has been incorporated in the model system under imprecise environment, and MSY policies under different harvesting scenarios have been discussed. Finally all the analytical findings are testified through extensive numerical simulations and the article ended with a conclusion.

     

South Pole Antarctica observations and modeling results: New insights on HOx radical and sulfur chemistry

Measurements of OH, H₂SO₄, and MSA at South Pole (SP) Antarctica were recorded as a part of the 2003 Antarctic Chemistry Investigation (ANTCI 2003). The time period 22 November, 2003–2 January, 2004 provided a unique opportunity to observe atmospheric chemistry at SP under both natural conditions as well as those uniquely defined by a solar eclipse event. Results under natural solar conditions generally confirmed those reported previously in the year 2000. In both years the major chemical driver leading to large scale fluctuations in OH was shifts in the concentration levels of NO. Like in 2000, however, the 2003 observational data were systematically lower than model predictions. This can be interpreted as indicating that the model mechanism is still missing a significant HO_x sink reaction(s); or, alternatively, that the OH calibration source may have problems. Still a final possibility could involve the integrity of the OH sampling scheme which involved a fixed building site. As expected, during the peak in the solar eclipse both NO and OH showed large decreases in their respective concentrations. Interestingly, the observational OH profile could only be approximated by the model mechanism upon adding an additional HO_x radical source in the form of snow emissions of CH₂O and/or H₂O₂. This would lead one to think that either CH₂O and/or H₂O₂ snow emissions represent a significant HO_x radical source under summertime conditions at SP. Observations of H₂SO₄ and MSA revealed both species to be present at very low concentrations (e.g., 5 × 10⁵ and 1 × 10⁵ molec cm^?3, respectively), but similar to those reported in 2000. The first measurements of SO₂ at SP demonstrated a close coupling with the oxidation product H₂SO₄. The observed low concentrations of MSA appear to be counter to the most recent thinking by glacio-chemists who have suggested that the plateau's lower atmosphere should have elevated levels of MSA. We speculate here that the absence of MSA may reflect efficient atmospheric removal mechanisms for this species involving either dynamical and/or chemical processes.     

The wind speed dependence of the concentrations of airborne particulate matter and NOx

The wind speed dependence of concentrations of PM₁₀, chloride, sulphate, nitrate, organic carbon, elemental carbon, particle number and NO_x has been determined at three separate sites, Marylebone Road (kerbside), North Kensington (urban background) and Harwell (rural). The data are best described by a general dilution term multiplied by up to three separate source-related terms which we interpret as representing long-range transport sources, discrete local (including area) sources and marine sources respectively. Using this approach, the various particulate metrics can be quantitatively disaggregated according to the contributions of the three source types. The behaviour of nitrate is anomalous, probably due to an influence of wind speed upon the dissociation of ammonium nitrate.     

The Impact of Gold Smelter Emissions on Vegetation and Soils of a Sub-Arctic Forest-Tundra Transition Ecosystem

Gold smelters near Yellowknife in Canada's Northwest Territories have emitted large quantities of sulfur dioxide and arsenic since inception of roasting in 1941. Although particulate wastes are well contained by baghouse fitters in the one remaining operating smelter, significant gaseous emissions continue. Soil and vegetation were sampled at 52 sites over an area of about 40 km radius from the source. Plant ecology was studied at 43 of those sites. After preliminary multi-element screening that indicated only arsenic was a serious persistent contaminant, x-ray fluorescence was used to measure arsenic content in sampled materials. The plant ecology data were synthesized into an Index of Vitality with numerical ratings of pertinent factors. In the marginal forests and rocky outcrops of the area, indicator species of vegetation permitted a division into zones of severe, moderate, mild, or no impact in order of increasing distance from the current center of emissions. Severe impact, including killing of trees, is local only. Analyses of foliage indicate little uptake of arsenic which, together with the presence of S0₂ symptoms, point to S0₂ as the main factor causing decline of vegetation. A separate study, abstracted here, supports this view by providing data that show a frequency of at least 2 significant fumigation episodes per growing season. Soil analyses indicate extremely high arsenic contamination near the stack. A monotonie pattern of dispersion yielded a function explainable in terms of rapid condensation of gaseous emissions. The relationship of arsenic in surface soil and vegetation to distance is approximately an inverse square.     

A Method for Predicting the Effective Volume Resistivity of a Sodium Depleted Fly Ash Layer

Research has been conducted to develop a technique for predicting the effective volume resistivity of a fly ash layer that has been exposed to circumstances leading to a hot-side precipitator problem known as sodium depletion. Eight fly ashes, representing a major portion of U.S. coals, were evaluated by subjecting 0.5 cm ash layers to a continuously applied voltage gradient of 4 kV/cm for periods of time up to 35 days at a temperature of 350°C (662°F). Resistivity was determined at 350°C before the test started and after the long period of applied voltage used to create the sodium depleted situation. In this condition, resistivity was also determined at 280°C (536°F) for an average electric field Intensity of 4 kV/cm and immediately prior to breakdown. This experimental method can be used with any ash sample to estimate resistivity In a sodium depleted condition. But in addition, a correlation resulting from these resistivity data has been developed. This correlation Is combined with an existing technique for predicting resistivity to produce a method for calculating the expected ash layer resistivity after sodium depletion has occurred.     

The 1999 Fresno Particulate Matter Exposure Studies: Comparison of Community,Outdoor, and Residential PM Mass Measurements

ABSTRACT

Two collaborative studies have been conducted by the U.S. Environmental Protection Agency (EPA) National Exposure Research Laboratory (NERL) and National Health and Environmental Effects Research Laboratory to determine personal exposures and physiological responses to par-ticulate matter (PM) of elderly persons living in a retirement facility in Fresno, CA. Measurements of PM and other criteria air pollutants were made inside selected individual residences within the retirement facility and at a central outdoor site on the premises. In addition, personal PM exposure monitoring was conducted for a subset of the participants, and ambient PM monitoring data were available for comparison from the NERL PM research monitoring platform in central Fresno. Both a winter (February 1-28, 1999) and a spring (April 19-May 16, 1999) study were completed so that seasonal effects could be     

Variations in the Emissions of Volatile Organic Compounds from the Toner for a Specific Photocopier

ABSTRACT

A laboratory thermal desorption apparatus was used to measure emissions from a number of nominally identical photocopier toners—manufactured to meet the specifications of one specific model copier—when these toners were heated to fuser temperature (180-200 °C). The objective was to assess how potential volatile organic compound (VOC) emissions from the toner for a given copier can vary, depending upon the production run and the supplier. Tests were performed on a series of toner (and associated raw polymer feedstock) samples obtained directly from a toner manufacturer, representing two production runs using a nonvented extrusion process, and on toner cartridges purchased from two local retailers, representing three different production lots (histories unknown). The results showed that the retailer toners consistently had up to 350% higher emissions of some major compounds (expressed as |ig of compound emit-ted/g of toner), and up to 100% lower emissions of others, relative to the manufacturer toners (p ≤ 0.01). The manufacturer toners from one production run had emissions of certain compounds, and of total VOCs, that were modestly higher (13-18%) than those from the other run (p ≤ 0.01). The emission differences between the retailer and manufacturer toners are probably due to differences