Use of Biotic Community Structure as a Measure of Ecological Degradation

The benthic macroinvertebrate communities of two lotic aquatic habitats,namely,the Churni River(C-R)and the Jalangi River(J-R)were compared in this study.One lotic aquatic system(C-R)was polluted by organic pollutants due to discharge of unprocessed sewage water,while the other(J-R)was not affected by such pollution.Evaluations of various physico-chemical properties of water,sediment and different macroinvertebrate communities of the two tropical lotic systems were done in a period from January,2002 to December,2003.A long term temporal change in the macroinvertebrate communities was recorded due to increase in sediment rH value.Sediment redox potential affected by the anthropogenic activities was found to be an important factor for alteration of macroinvertebrate communities in these aquatic ecosystems.A positive correlation has been established between rH and Margalef index in this study.Potassium and the total count of coliform bacteria in water showed significantly higher values for the polluted Churni River than those for the Jalangi River.Fig 3,Tab 4,Ref 34     

DCMU-enhanced fluorescence as an index of photosynthetic activity in phytoplankton

Tests have been carried out, both on phytoplankton cultures and in the field, on the relation between the ratio of 3-(3,4-dichlorophenyl)-1,1-dimethyl urea (DCMU)-enhanced to normal fluorescence (F _D /F _N ) and the specific photosynthetic rate (P/B). In all cases observed, significant linear correlations were found between these two values. Differences in this relation were observed according to species and physiological conditions. Nutrient stress that occurs in batch cultures decreases both F _D /F _N and P/B, while lowered light intensity has a different effect on both, increasing F _D /F _N and decreasing P/B. This is interpreted as indicating that F _D /F _N is an index of photosynthetic efficiency at different light levels and an indicator of the specific photosynthetic rate (P/B) when physiological conditions vary at a given light intensity. The practical use of DCMU-enhanced fluorometry to estimate instantaneous P/B values in the field is discussed, stressing the frequent calibrations needed, as in all in situ fluorometry studies.     

Studies on phytotoxic effect of aluminium on growth and some morphological parameters of Vigna radiata L. Wilczek

Aluminium toxicity is a major deterrent for plant growth in acid soils below pH 5.0. This study deals with effect of aluminium toxicity on growth of mungbean (Vigna radiata L. Wilczek) seedlings. Seed germination (in %) declined with increased content of Al2(SO4)3, while promotive effect was observed at very low dosage. Different concentrations of aluminum sulphate salt were applied to mungbean seeds. Measurement of aluminium content in mungbean leaves was done through atomic absorption spectrophotometer. Root length (root and hypocotyl length) and shoot length (shoot and epicotyl length) was measured at seven days old seedling stage. Different concentrations of Al2(SO4)3 were found to have significant effect both on shoot and root length. Leaf area, fresh and dry weight was significantly reduced. Increased stomatal frequency and trichome density with an increase in concentrations of Al2(S04)3 was observed through scanning electron microscope.     

Regression modelling of hourly NOx and NO2 concentrations in urban air in London

Based on hourly measurements of NO_x NO₂ and O₃ and meteorological data, an ordinary least squares (OLS) model and a first-order autocorrelation (AR) model were developed to analyse the regression and prediction of NO_x and NO₂ concentrations in London. Primary emissions and wind speed are the most important factors influencing NO_x concentrations; in addition to these two, reaction of NO with O₃ is also a major factor influencing NO₂ concentrations. The AR model resulted in high correlation coefficients (R > 0.95) for the NO_x and NO₂ regression based on a whole year's data, and is capable of predicting NO₂ (R = 0.83) and NO_x (R = 0.65) concentrations when the explanatory variables were available. The analysis of the structure of regression models by Principal Component Analysis (PCA) indicates that the regression models are stable. The results of the OLS model indicate that there was an exceptional NO₂ source, other than primary emission and reaction of NO with O₃, in the air pollution episode in London in December 1991.     

Laboratory evidence of natural remobilization of multicomponent DNAPL pools due to dissolution

Mixtures of dense non-aqueous phase liquids (DNAPLs) trapped in the subsurface can act as long-term sources of contamination by dissolving into flowing groundwater. In general, the components of higher solubility are removed more quickly, thus altering the composition of the remaining DNAPL, and possibly leading to changes in its physical properties. Through the development of a simple compositional model, Roy et al. [J. Contam. Hydrol. 2002 (59) 163] showed that preferential dissolution of a mixed DNAPL could potentially result in changes in density and interfacial tension that could subsequently lead to remobilization of an initially static DNAPL pool. The laboratory experiments presented in this next paper provide a proof-of-concept for the previously presented theory, demonstrating and quantifying this process of remobilization. In addition, the experiments provide a data set for evaluation of the model presented by Roy et al. [J. Contam. Hydrol. 2002 (59) 163]. In the four experiments, a DNAPL pool comprised of tetrachloroethene and benzene was created as an open pool overlying glass beads within a water-saturated 2-D flow box. Experiments included rectangular and triangular pools. In each of the experiments, remobilization (as breakthrough) was observed more than 2 weeks after formation of the initial pool. During each experiment, the pool height declined as mass was lost by dissolution, while sampling indicated a decrease in the mole fraction of benzene, the more soluble component. Small protuberances formed along the bottom of the pool as its composition changed with time and the displacement pressure was achieved for various pore throats. Eventually one of the protuberances extended further, forming a finger (breakthrough). In general, the pool emptied as the finger proceeded further into the beads. It was also shown theoretically and experimentally that remobilization will occur sooner for pools with a triangular (pointing down), rather than rectangular, shape. The experimental results were simulated using the model developed by Roy et al. [J. Contam. Hydrol. 2002 (59) 163]. The model matched the observations well, suggesting that it accurately represents the primary mechanisms involved with natural remobilization under the conditions of the study.     

Airborne pollutants along a roadside: assessment using snow analyses and moss bags

Vertical snow sampling and moss bag transplants were used to estimate the local inorganic and organic pollutant load deposited from traffic along a major highway in Finland. The pH and concentrations of Cl(-), NO(3)(-), SO(4)(2-), Ca(2+), Na(+) and polyaromatic hydrocarbons (PAHs) were determined from snow samples collected in winter at different sites along the highway. In summer, moss bags containing 20 g of fresh red-stemmed feather moss (Pleurozium schreberi) were transplanted at the same sites. The moss bag transplants remained exposed to roadside traffic for a period of one month following which the samples were collected and the PAH profiles and concentrations were analysed. The deposition of inorganic and organic pollutants from road traffic was observed up to 60 m from the road. The prevailing winds had a significant effect on the dispersion of pollutants. Snow appears to be a good collector of inorganic pollutants from the atmosphere and can be used to monitor local airborne pollution from road traffic. Snow packs can also be used as passive collectors of organic pollutant loads from road traffic on a local scale. To monitor organic PAH deposition from the road traffic, moss bags appeared to be better indicators compared to snow sampling. The efficiency of moss bags in accumulating PAH compounds indicate that vegetation may be an important sink for traffic pollution.     

ERD of Residual TCE DNAPL Achieving Nondetect from a Single Injection of Food‐Grade Waste

Residual dense nonaqueous phase liquid (DNAPL) composed of trichloroethene (TCE) was identified in a deeper interval of an overburden groundwater system at a manufacturing facility located in northern New England. Site hydrostratigraphy is characterized by two laterally continuous and transmissive zones consisting of fully‐saturated fine sand with silt and clay. The primary DNAPL source was identified as a former dry well with secondary contributions from a proximal aboveground TCE storage tank. A single additive‐injection mobilization in 2001 utilizing a food‐grade injectate formulated with waste dairy product and inactive yeast enhanced residual TCE DNAPL destruction in situ by stimulating biotic reductive dechlorination. The baseline TCE concentration was detected up to 97,400 μg/L in the deeper interval of the overburden groundwater system, and enhanced reductive dechlorination (ERD) achieved >99 percent reduction in TCE concentrations in groundwater over nine years with no evidence of sustained rebound. TCE concentrations have remained nondetect below 2.0 μg/L for the last five consecutive sampling rounds between 2013 and 2015. ERD utilizing a food‐grade injectate is a green remediation technology that has destroyed residual DNAPL at the site and achieved similar results at other residual DNAPL sites during both pilot‐ and full‐scale applications. ©2016 Wiley Periodicals, Inc.     

Identification and elucidation of anthropogenic source contribution in PM10 pollutant: Insight gain from dispersion and receptor models

Source apportionment study of PM₁₀ (Particulate Matter) in a critically polluted area of Jharia coalfield, India has been carried out using Dispersion model, Principle Component Analysis (PCA) and Chemical Mass Balance (CMB) techniques. Dispersion model Atmospheric Dispersion Model (AERMOD) was introduced to simplify the complexity of sources in Jharia coalfield. PCA and CMB analysis indicates that monitoring stations near the mining area were mainly affected by the emission from open coal mining and its associated activities such as coal transportation, loading and unloading of coal. Mine fire emission also contributed a considerable amount of particulate matters in monitoring stations. Locations in the city area were mostly affected by vehicular, Liquid Petroleum Gas (LPG) & Diesel Generator (DG) set emissions, residential, and commercial activities. The experimental data sampling and their analysis could aid understanding how dispersion based model technique along with receptor model based concept can be strategically used for quantitative analysis of Natural and Anthropogenic sources of PM₁₀.