Chemical fractionation of Cu and Zn in stormwater, roadway dust and stormwater pond sediments

This study evaluated the chemical fractionation of Cu and Zn from source to deposition in a stormwater system. Cu and Zn concentrations and chemical fractionation were determined for roadway dust, roadway runoff and pond sediments. Stormwater Cu and Zn concentrations were used to generate cumulative frequency distributions to characterize potential exposure to pond-dwelling organisms. Dissolved stormwater Zn exceeded USEPA acute and chronic water quality criteria in approximately 20% of storm samples and 20% of the storm duration sampled. Dissolved Cu exceeded the previously published chronic criterion in 75% of storm samples and duration and exceeded the acute criterion in 45% of samples and duration. The majority of sediment Cu (92-98%) occurred in the most recalcitrant phase, suggesting low bioavailability; Zn was substantially more available (39-62% recalcitrant). Most sediment concentrations for Cu and Zn exceeded published threshold effect concentrations and Zn often exceeded probable effect concentrations in surface sediments.     

Animal-related injuries: a population-based study of a five-state region in the upper Midwest: Regional Rural Injury Study II

PROBLEM: While agricultural injury has been identified among the major causes of occupational injury mortality and morbidity, data have been limited pertinent to the magnitude, consequences, and potential risk factors for animal-related injuries -- a major source of morbidity among agricultural operations. METHODS: Demographics, exposure, and injury data were collected for 1999 and 2001 among agricultural households in a five-state region. Causal models facilitated survey design, data analyses, and interpretation of results; directed acyclic graphs guided multivariate modeling. RESULTS: From 7,420 households (84% response of eligible), a total of 5,045 injury events were reported; 1,016 (20.1%) were animal-related. Multivariate analyses revealed increased risks for those <20 years; residents of all states compared to Minnesota; all age groups compared to 0-4 years; >0 hours worked; and prior agricultural injury history. For those 20+ years, increased risks were identified for: South Dakota residents; males; >0 hours worked; and prior agricultural injury history. For those cases <20 and 20+ years of age, 58% and 46%, respectively, resulted in lost work time on their agricultural operations (31% and 50%, one week or more). CONCLUSIONS: Animal-related injury has a major impact on the agricultural industry. Results serve as a basis for interventions and further research. IMPACT ON INDUSTRY: The impact of animal-related injuries on the agricultural industry appears significant; among age groups <20 and 20+, 85% and 82%, respectively, had some resulting restriction. For all events combined, 29% and 30%, respectively, involved restriction from one week to 3+ months; 12% and 15% involved restriction for one month or more. Among those <20 and 20+ years of age, 58% and 46%, respectively, lost work time on their own agricultural operation as a result of injuries associated with their own operation; 22% and 15% lost one week or more. Moreover, of the non-agriculture-related injuries, 31% and 50% resulted in lost work time on their own operation; 15% and 28%, respectively, lost one week or more. Restrictions such as these can affect the productivity of the operation, resulting in financial impacts, especially on small operations that have few people to manage the required tasks.     

Is adaptive co-management ethical?

‘Good’ governance and adaptive co-management hold broad appeal due to their positive connotations and ‘noble ethical claims’. This paper poses a fundamental question: is adaptive co-management ethical? In pursuing an answer to this question, the concept of adaptive co-management is succinctly summarized and three ethical perspectives (deontology, teleology and existentialism) are explored. The case of adaptive co-management in Cambodia is described and subsequently considered through the lens of ethical triangulation. The case illuminates important ethical considerations and directs attention towards the need for meditative thinking which increases the value of tradition, ecology, and culture. Giving ethics a central position makes clear the potential for adaptive co-management to be an agent for governance, which is good, right and authentic as well as an arena to embrace uncertainty.     

Grassland Plant Composition Alters Vehicular Disturbance Effects in Kansas,USA

Many “natural” areas are exposed to military or recreational off-road vehicles. The interactive effects of different types of vehicular disturbance on vegetation have rarely been examined, and it has been proposed that some vegetation types are less susceptible to vehicular disturbance than others. At Fort Riley, Kansas, we experimentally tested how different plant community types changed after disturbance from an M1A1 Abrams tank driven at different speeds and turning angles during different seasons. The greatest vegetation change was observed because of driving in the spring in wet soils and the interaction of turning while driving fast (vegetation change was measured with Bray-Curtis dissimilarity). We found that less vegetation change occurred in communities with high amounts of native prairie vegetation than in communities with high amounts of introduced C₃ grasses, which is the first experimental evidence we are aware of that suggests plant communities dominated by introduced C₃ grasses changed more because of vehicular disturbance than communities dominated by native prairie grasses. We also found that vegetation changed linearly with vehicular disturbance intensity, suggesting that at least initially there was no catastrophic shift in vegetation beyond a certain disturbance intensity threshold. Overall, the intensity of vehicular disturbance appeared to play the greatest role in vegetation change, but the plant community type also played a strong role and this should be considered in land use planning. The reasons for greater vegetation change in introduced C₃ grass dominated areas deserve further study.     

Generating sustainable towns from Chinese villages: a system modeling approach

The great majority of China's developing towns will be extensions of already existing villages. With the prospect of hundreds of millions of Chinese farmers projected to leave their villages to become industrial workers in new and expanded towns within the next few years, new challenges will be faced. As expansion and modernization progress, this development moves from the traditional village model that operates not far from resource sustainability to increasingly unsustainable patterns of commerce, urban development, and modern life. With such an unprecedented mass migration and transformation, how can Chinese culture survive? What is to become of the existing million plus agricultural villages? How can these massively unsustainable new industrial towns survive? In the European Commission sponsored research program SUCCESS, researchers worked from the scale of the Chinese village to find viable answers to these questions.     

Empirical relationship between precision and ultra-trace concentrations of PCDD/Fs and dioxin-like PCBs in biological matrices

Dioxin analysis in food and feed can be characterized as an analytical application where very high accuracy is required at very low levels of contamination. Gas chromatography (GC) in combination with 13C-label isotope dilution (ID) high resolution mass spectrometry (HRMS) is the reference congener-specific technique characterized by pronounced selectivity, precision and trueness at parts-per-trillion (ppt) and sub-parts-per-trillion (sub-ppt) levels. The quality of the analytical data produced routinely by a laboratory should be adequate for its intended purpose, i.e., one will seek a compromise between the cost and time needed and the consequences of incorrect decisions due to erroneous results. The requirements for reproducibility are usually dependent on the analyte concentrations and have been expressed in various empirical functions. While Horwitz or modified functions are widely useful for many purposes, it would be difficult to expect these functions to cover every analytical problem. This study reports on precision characteristics achieved by the GC-ID-HRMS reference method for polychlorinated dibenzo-p-dioxins (PCDDs), polychlorinated dibenzofurans (PCDFs) and dioxin-like polychlorinated biphenyls (DL-PCBs) in food and feed in two interlaboratory method-performance studies among expert laboratories with long-standing experience in this field. Striking linear functions in log scale between reproducibility standard deviation and congener's level over a concentration range of 10(-8)-10(-14)g per g fresh weight are observed. The data fit very well to a Horwitz-type function of the form sR=0.153c0.904, where sR and c are dimensionless mass ratios expressed in pg g(-1) on fresh weight, regardless of the nature of the toxic congeners, food and feed matrices, or sample preparation methods. We demonstrate that the proposed function is suitable for use as a fitness-for-purpose criterion for proficiency assessment in interlaboratory comparisons on dioxins and related compounds in food.     

Channel flow and trichloroethylene treatment in a partly iron-filled fracture: experimental and model results

Technical developments have now made it possible to emplace granular zero-valent iron (Fe(0)) in fractured media to create a Fe(0) fracture reactive barrier (Fe(0) FRB) for the treatment of contaminated groundwater. To evaluate this concept, we conducted a laboratory experiment in which trichloroethylene (TCE) contaminated water was flushed through a single uniform fracture created between two sandstone blocks. This fracture was partly filled with what was intended to be a uniform thickness of iron. Partial treatment of TCE by iron demonstrated that the concept of a Fe(0) FRB is practical, but was less than anticipated for an iron layer of uniform thickness. When the experiment was disassembled, evidence of discrete channelised flow was noted and attributed to imperfect placement of the iron. To evaluate the effect of the channel flow, an explicit Channel Model was developed that simplifies this complex flow regime into a conceptualised set of uniform and parallel channels. The mathematical representation of this conceptualisation directly accounts for (i) flow channels and immobile fluid arising from the non-uniform iron placement, (ii) mass transfer from the open fracture to iron and immobile fluid regions, and (iii) degradation in the iron regions. A favourable comparison between laboratory data and the results from the developed mathematical model suggests that the model is capable of representing TCE degradation in fractures with non-uniform iron placement. In order to apply this Channel Model concept to a Fe(0) FRB system, a simplified, or implicit, Lumped Channel Model was developed where the physical and chemical processes in the iron layer and immobile fluid regions are captured by a first-order lumped rate parameter. The performance of this Lumped Channel Model was compared to laboratory data, and benchmarked against the Channel Model. The advantages of the Lumped Channel Model are that the degradation of TCE in the system is represented by a first-order parameter that can be used directly in readily available numerical simulators.     

Compost amendment of Cu-Zn minespoil reduces toxic bioavailable heavy metal concentrations and promotes establishment and biomass production of Bromus carinatus (Hook and Arn.)

A series of lab and greenhouse studies were undertaken to understand how Cu and Zn toxicity influences Bromus carinatus (Hook and Arn.) growth, to what degree an organic amendment (yard waste compost) may reduce Cu and Zn bioavailability in Cu-Zn minespoil and promote plant growth in combination with fertilizer, and how the vertical distribution of compost in the minespoil influences rooting depth. Root Cu and Zn toxicity thresholds were determined to be 1 mgL(-1) and 10 mgL(-1) in solution, respectively. The compost amendment had exceptionally high Cu and Zn binding capacities (0.17 and 0.08 g metal g C(-1), for Cu and Zn, respectively) that were attributed to high compost humic and fulvic acid concentrations. Maximum plant biomass was achieved when minespoil was amended with compost and fertilizer in combination. Fertilizer alone had no effect on plant growth. Mixing compost into the minespoil was essential to promote adequate rooting depth.     

A general kinetic law for heavy metal vaporization during municipal solid waste incineration

Metal emissions from waste incineration plants become a great environmental concern because of their toxicity for both human health and environment. Metals are not destroyed by high-temperature thermal treatment and some vaporized metals may be emitted. It is thus essential to understand the release mechanism of metals during high-temperature waste treatment, in order to improve the understanding of their behavior and the control of their emission. The objective of this study is to identify the kinetic law for metal release from realistic artificial waste. The vaporization of three metals of most concern (Cd, Pb and Zn) during municipal waste incineration was studied. The vaporization rate at the particle level was determined from the experimental concentration profile in the outlet gas of a fluidized bed reactor, by using the inverse method that was previously developed and validated by our team. As a first step, the kinetic parameters were determined thanks to experiments carried out at several temperatures. Specific laws, for each studied metal, were thus obtained as a function of temperature. Nevertheless, it is very useful to identify all the experimental kinetic curves (all studied metals at all temperatures) to one single mathematical law. Therefore, a general kinetic law, expressing the solid matrix influence on the metal vaporization dynamic, was determined as a second step. It permits to predict the vaporization characteristic time and the time course of the metal concentration in the waste.