TOPHAZOP: a knowledge-based software tool for conducting HAZOP in a rapid, efficient yet inexpensive manner

Hazard and operability (HAZOP) studies constitute an essential step in the risk analysis of any chemical process industry and involve systematic identification of every conceivable abnormal process deviation, its causes and abnormal consequences. These authors have recently proposed optHAZOP as an alternative procedure for conducting HAZOP studies in a shorter span of time than taken by conventional HAZOP procedure, with greater accuracy and effectiveness [Khan, F. I. and Abassi, S. A., optHAZOP. An effective and efficient technique for hazard identification and assessment Journal of Loss Prevention in the Process Industries, 1997, 10, 191–204]. optHAZOP consists of several steps, the most crucial one requires use of a knowledge-based software tool which would significantly reduce the requirement of expert man-hours and speed up the work of the study team. TOPHAZOP (Tool for OPTmizing HAZOP) has been developed to fulfil this need.

The TOPHAZOP knowledge-base consists of two main branches: process-specific and general. The TOPHAZOP framework allows these two branches to interact during the analysis to address the process-specific aspects of HAZOP analysis while maintaining the generality of the system. The system is open-ended and modular in structure to make easy implementation and/or expansion of knowledge. The important features of TOPHAZOP and its performance on an industrial case study are described.     

Prevention of musculoskeletal complaints in nursing: Aims, approach and content of an ergonomic-educational programme

In 1992 a comprehensive health-promotion project was initiated in seven nursing-homes in the Netherlands. This project was designed to implement an ergonomic-educational programme, with the intention of reducing physical workload and to bring about safe working in order to prevent work-related musculoskeletal complaints. After a period of external support, employees of the nursing-homes should be able to proceed with the programme independently. In this paper the content of the programme and its underlying strategies and theories are described. So far, the programme has got off to a good start in all the nursing-homes. Positive effects of the programme could be demonstrated and guidelines and protocols for safe working were introduced. However, it is as yet too early for definitive conclusions to be drawn regarding the aspect of continuity.     

Thermal and mechanical properties of poly(lactic Acid) and poly(ethylene/butylene Succinate) blends

In this study, blends of poly (lactic acid) (PLA) with poly(ethylene/butylene succinate) (Bionolle) have been investigated for their thermal and mechanical properties as a function of the concentration of Bionolle. Differential scanning calorimetry (DSC), dynamic mechanical analysis (DMA), and tensile tests were used to characterize the blends. From the results of the DMA and DSC, it was found that this blend system was not miscible within the compositions studied. DSC results showed that adding Bionolle aids in crystallization of PLA. It was observed that increasing the Bionolle concentration led to a slight increase in the strain-at-break of the blends but a decrease in the Young’s modulus and ultimate tensile strength. Biaxially oriented films showed an increase in tensile strength, modulus, and strain-at-break.     

Design parameters for fixed bed reactors of activated carbon developed from fertilizer waste for the removal of some heavy metal ions

Activated carbon, developed from fertilizer waste, has been used for the removal of Hg²⁺, Cr⁶⁺, Pb²⁺, and Cu²⁺. Mass transfer kinetic approach has been successfully applied for the determination of various parameters necessary for designing a fixed-bed absorber. Parameters selected are the length of the (PAZ) primary adsorption zone (δ), total time involved for the establishment of primary adsorption zone (t_x), mass rate of flow to the absorber (F_m), time for primary adsorption zone to move down its length (t_δ), amount of adsorbate adsorbed in PAZ from breakpoint to exhaustion (M_s), fractional capacity (f), time of initial formation of PAZ (t_f) and per cent saturation of column at break point. Chemical regeneration has been achieved with 1 M HNO₃.     

Groundwater Remediation and Aquifer Clean-Up: A Case Study

Groundwater was being remediated with pump and treat technology at a facility where the groundwater was contaminated with commonly used degreaser solvents. Hydraulic conductivity of the heterogeneous residuum was beneficiated by applying pneumatic fracturing technology. The remedial system was controlled and monitored by a sophisticated remote telemetry system. A case history follows.     

Recent Developments in Cleanup Technologies

Although the reaction mechanics are somewhat mysterious, the use of iron for in situ groundwater treatment has recently gained considerable attention and respect in the remediation industry. The basic scientific principles of both applications of iron have been known for over a century; however, both were nearly unheard of as remediation technologies five years ago. Both technologies have a strong potential for widespread use. They are commercially available, have been proven in field studies, are less expensive than traditional pump and treat technologies, and, in many types of groundwater systems, may be able to meet difficult-to-achieve groundwater treatment standards. As these technologies continue to undergo development, there could be considerably more aggressive applications used to treat ground-water containing high concentrations of chlorinated organics and DNAPLs.     

Getting the ‘pulse’ of your employees: the use of cardiovascular research in better understanding behavior in organizations

Cardiovascular disease has severe consequences for both individual betterment and organizational health. Yet, organization‐based cardiovascular research remains quite limited. This commentary addresses this void by integrating research dating from the famous Hawthorne experiments with current medical science. It then suggests future organizational research on cardiovascular health and recommends use of specific composite cardiovascular measures to advance our understanding of the organizational implications of cardiovascular disease. Copyright © 2006 John Wiley & Sons, Ltd.