Ca and OH release of ceramsites containing anorthite and gehlenite prepared from waste lime mud

Lime mud is a kind of solid waste in the papermaking industry, which has been a source of serious environmental pollution. Ceramsites containing anorthite and gehlenite were prepared from lime mud and fly ash through the solid state reaction method at 1050°C. The objective of this study was to explore the efficiency of Ca^2 + and OH⁻ release and assess the phosphorus and copper ion removal performance of the ceramsites via batch experiments, X-ray diffraction (XRD) and scanning electron microscopy (SEM). The results show that Ca^2 + and OH⁻ were released from the ceramsites due to the dissolution of anorthite, gehlenite and available lime. It is also concluded that gehlenite had stronger capacity for Ca^2 + and OH⁻ release compared with anorthite. The Ca^2 + release could be fit well by the Avrami kinetic model. Increases of porosity, dosage and temperature were associated with increases in the concentrations of Ca^2 + and OH⁻ released. Under different conditions, the ceramsites could maintain aqueous solutions in alkaline conditions (pH = 9.3–10.9) and the release of Ca^2 + was not affected. The removal rates of phosphorus and copper ions were as high as 96.88% and 96.81%, respectively. The final pH values of both phosphorus and copper ions solutions changed slightly. The reuse of lime mud in the form of ceramsites is an effective strategy.     

Preparation of MgCr<Subscript>2</Subscript>O<Subscript>4</Subscript> from waste tannery solution and effect of sulfate,chloride, and calcium on leachability of chromium

This paper presents a study regarding the preparation of MgCr₂O₄ from waste tannery solution, and chromium leaching behavior is also investigated with varying amounts of sulfate, chloride and calcium. The phase transformation, crystallinity index and crystallite diameter were characterized using XRD, FT-IR and thermal analysis. A well-crystallized MgCr₂O₄ was successfully prepared at 1400 °C. The sintering temperature had a major impact on the formation of MgCr₂O₄ compared with sintering time. The MgCr₂O₄ phase was observed initially at 400 °C and its crystallite diameter increased with increasing temperature. The concentration of total chromium leached and Cr(VI) decreased gradually with increasing temperature. The considerable amount of Cr(VI) was found in the leachate at 300–500 °C caused by Cr(VI) intermediary products. Sulfate and chlorine could impact the transformation efficiency of chromium adversely, and chlorine has a more significant effect than sulfate. The presence of calcium disturbed the formation of MgCr₂O₄ and new chromium species (CaCrO₄) appeared, which resulted in a sharp increase in the concentration of leached Cr(VI). Incorporating Cr(III) into the MgCr₂O₄ spinel for reusable products reduced its mobility significantly. This was demonstrated to be a promising strategy for the disposal of chromium containing waste resource.     

基于PLFA法分析亚硝氮、硝氮和氨氮对厌氧微生物细菌群落的影响

利用磷脂脂肪酸(PLFA)技术研究了亚硝氮、硝氮和氨氮在不同浓度水平下对中温厌氧颗粒污泥中厌氧细菌群落结构的影响.结果表明,高浓度亚硝氮(360 mg·L-1,以N计)、硝氮(300 mg·L-1,以N计)和氨氮(3000 mg·L-1,以N计)使系统COD去除率分别下降至3.49%、10.85%和71.53%,并使污泥表面主要细菌由杆菌变为球状菌;亚硝氮和硝氮引起厌氧细菌和革兰氏阳性菌的含量下降,氨氮引起革兰氏阴性菌的含量下降;PLFA香农-威尔多样性指数随着亚硝氮和硝氮浓度的升高从1.12分别下降至0.96和1.03,氨氮对PLFA香农-威尔多样性指数无明显影响.     

Preparation, characterization and performance of poly(m-phenylene isophthalamide)/organically modified montmorillonite nanocomposite membranes in removal of perfluorooctane sulfonate

Nanocomposite membranes containing poly(m-phenylene isophthalamide) (PMIA) and organically modified montmorillonite (OMMT) were prepared by a combination of solution dispersion and wet-phase inversion methods, and the effects of OMMT addition on the properties and performance of fabricated nanofiltration membranes were investigated. The membranes were characterized by contact angle measurements, scanning electron microscopy (SEM), atomic force microscopy (AFM), thermogravimetric analysis, and zeta potential. The performance of the membranes was elucidated by the removal of perfluorooctane sulfonate (PFOS) at neutral pH. Increasing OMMT concentration improved the thermal stability and hydrophilicity of the membranes. The permeation and rejection of PFOS were significantly improved. The performance of fabricated nanofiltration membranes in removal of PFOS varied depending on the solute and membrane properties as well as solution conditions. Finally, a comparison between fabricated membranes and a commercial NF membrane (ESNA1-K1, Hydecanme) proved that the OMMT addition is a convenient procedure for producing nanocomposite membranes with superior properties and performance.     

植物法改性类Fenton反应催化剂降解甲基橙

采用银杏叶和桑叶提取液制备了改性类Fenton反应催化剂并进行了表征分析,研究了溶液初始p H、反应温度、催化剂加入量、甲基橙初始质量浓度等因素对甲基橙降解率的影响,同时考察了催化剂的重复使用效果。表征结果表明:制备出的催化剂为Fe_2O_3和Fe OOH的混合物;桑叶改性催化剂的粒径分布较银杏叶改性催化剂均匀,粒径较小,比表面积较大。实验结果表明:在初始p H为6.23、反应温度60℃、催化剂用量1 g/L、甲基橙初始质量浓度100 mg/L的条件下,银杏叶改性催化剂的甲基橙降解率为99.40%,桑叶改性催化剂的甲基橙降解率为99.96%;碱性条件下,甲基橙降解率仍接近100%,扩宽了反应的p H适用范围,为碱性条件下处理偶氮染料提供了新思路;催化剂重复使用6次之后,甲基橙降解率仍可达到99%。根据反应前后溶液的紫外-可见吸收光谱,初步探讨了降解机理。     

某矿区农田土壤重金属潜在生态风险评价及形态分析研究

对广西某矿区农田土壤中的Cd、Pb、Zn、Hg进行潜在生态风险评价及存在形态分析.结果表明,研究区域Cd为极强危害程度,Pb和Hg为很强危害程度,Zn为中等危害程度,所有采样点位均处于很强危害程度,其中主要的贡献来自于Cd.形态分析结果表明,Cd以可交换态为主,Pb以碳酸盐态和铁锰氧化态为主,Zn以残渣态、有机结合态和铁锰氧化态为主,Hg以残渣态和有机结合态为主.次生相与原生相分布比值法与潜在生态风险评价法评价结果存在差异,两种方法的评价结果均应加以考虑.     

镇江城市生物多样性现状研究

利用生态卫星遥感解析数据,评价得出镇江市生态环境质量指数维持在良好等级。对镇江市鸟类现状、森林生态系统植被现状、生物入侵情况进行了调查总结,分析了生物多样性变化的客观原因,并提出保护中存在的不足方面。     

基于DEA-Malmquist方法我国海洋陆源污染治理效率评价

运用DEA-Malmquist指数对我国沿海地区2003-2012年陆源污染治理效率进行测算,并分析治理效率的动态变化、空间差异及影响因素。研究结果表明:（1）2003～2012年我国海洋陆源污染治理全要素生产率呈下降趋势,其主要原因是企业技术进步率相对下降;（2）沿海各省市陆源污染治理全要素生产率变化存在较大差异,技术进步差异是引起地区变化差异的主要原因;（3）环渤海经济区陆源污染治理效率较低,其全要素生产率2008年以后下降明显;（4）研发经费及环保投入都会促进陆源排污显著减少,工业企业规模对陆源入海污染物有显著正效应。