Exploring the embodied carbon flow interactive relationships in China from an ecological network perspective: a model framework and application at provincial level

Environmental Science and Pollution Research - Energy-related carbon emissions take a large proportion in China, and the interregional trade caused by provincial disparities has led to significant...     

调理剂-植物栽培协同降低矿区农田土壤中重金属有效态含量

定量评估重金属有效态含量是明确农田土壤修复过程中重金属生态环境风险的重要步骤。针对硫化物矿区重金属污染土壤开展添加蚕沙-铁粉及蚕沙-伊蒙土-铁粉调理剂条件下油葵、孔雀草、香茅草和桑树4种经济作物的盆栽试验,并测定经济作物与调理剂共同作用下土壤中pH、有机质及镉砷铅锌铜有效态的含量。结果显示作物栽培与调理剂共同作用下,土壤pH值在两季中均有增加,土壤有机质在第一季中增加。第一季种植4种经济作物添加蚕沙-铁粉可显著降低土壤中多种重金属有效态含量,各重金属的最高钝化效率分别为Cd 30.3%、As 49.5%、Pb33.6%、Zn 52.1%、Cu 45.7%,优于蚕沙-伊蒙土-铁粉的调理效果。第二季种植时调理剂的钝化效率普遍降低。两季综合来看,蚕沙-铁粉联合香茅草时有效态镉、砷、铅、锌、铜的降低幅度最大。因此,添加蚕沙-铁粉调理剂的四种作物单季种植时能同时降低镉、砷、铅、锌、铜有效态的含量,香茅草两季种植时能同时降低以上5种重金属有效态含量,具有潜在应用价值。     

吸附法净化工业VOCs的研究进展

挥发性有机化合物(VOCs)是大气中PM2.5及O3的关键前体物,大多易燃易爆,部分属有毒有害物质,会造成大气环境污染,有损人群健康.吸附法因简单高效及低成本等优点被广泛应用于VOCs的净化.综述了工业VOCs的类型及特点,分析了影响VOCs吸附净化效果的主要因素,如吸附材料、吸附剂物化参数(比表面积、孔结构、表面官能...     

Iodine enrichment and the underlying mechanism in deep groundwater in the Cangzhou Region,North China

Environmental Science and Pollution Research - The lack of information on the origin and behavior of iodine in deep groundwater restricts the development and use of groundwater resources. To...     

基于藻细胞形态和光合特征的水源地藻类种群时空分布机制及预警防控

为明晰藻细胞最基本属性细胞形态在藻种时空分布与竞争演替中扮演的角色,选择来自蓝藻、绿藻等藻门的45个具有不同细胞形态特征的常见藻种,通过实验室分析藻细胞形态特征参数与光合特征间相关关系,并基于于桥水库藻类种群监测数据探究藻类形态时空分布的驱动因素。研究发现,反映藻细胞光合作用过程中捕光潜力的细胞投影面积 (CPA) 是影响藻种光合特性的关键形态学参数;通过构建CPA与光系统II中调节性能量耗散量子产量 (Y(NPQ))、光响应曲线初始斜率 (α) 、最大电子传递速率 (ETRmax) 等光合参数建的关系模型,发现CPA与Y(NPQ)呈现强正相关关系 (R² = 0.31±0.01,p < 0.001) ,Y(NPQ)是影响藻类种群时空分布的关键参数。于桥水库中藻类种群的综合Y(NPQ)具有显著季节性,由春季到夏季逐渐降低,夏季藻类综合Y(NPQ)最低 (0.057±0.075) ,秋冬季呈现增加趋势,冬季藻类综合Y(NPQ)最高 (0.072±0.062) 。此外,藻类种群综合Y(NPQ)随水深增加呈降低趋势,Y(NPQ)是影响藻类形态空间分布的重要因素。基于于桥水库数据制定了以水体Y(NPQ)为核心的有害藻类预警防控体系,以期为实现针对水源地不同形态有害藻类的预警提供参考。     

How changing grain size affects the land surface temperature pattern in rapidly urbanizing area: a case study of the central urban districts of Hangzhou City,China

Environmental Science and Pollution Research - Urbanization has led to the rapid and large-scale changes in land use and land cover and has affected the spatial distribution of land surface...     

Synthesis of Ni-doped anatase TiO2 single crystals loaded on wood-based activated carbon for enhanced photodegradation of triphenylmethane dyes

Environmental Science and Pollution Research - In this work, the Ni-doped anatase TiO2 single crystals loaded on activated carbon (Ni-T/AC) were synthesized by a sol–gel method. The chemical...     

红色非硫光合细菌的生长特性研究

红色非硫光合细菌菌种从城市污水处理厂活性污泥中分离得到,对红色非硫光合细菌的生长规律及其影响因素进行研究,试验表明在进行污水处理时所用的红色非硫光合细菌的最佳培养条件为接种量2%,pH7～8,光照强度为1500lx,光照厌氧条件下培养3～5d。这为红色非硫光合细菌应用于染料有机化工废水处理的进一步研究提供了理论依据。     

典型废矿物油的产生工艺及其重金属含量特征研究

分析了6种典型废矿物油的产生工艺及特性,研究了废矿物油样品的重金属浓度特征。结果表明,不同产生工艺和工作环境,油品的损耗程度和产污情况存在明显差异。典型废矿物油样品中检出的主要重金属包括Cr、Ni、Zn、Cu、Pb、Mo和Ba等7种。其中,Zn浓度相对较高,Cr、Cu、Mo和Ba的浓度次之,Ni和Pb的浓度相对较少。Zn、Mo、Ba主要来自于添加剂掺入,Cr、Ni、Cu、Pb主要来自使用过程中磨料混入或杂质进入。6种废矿物油直接进入环境中的重金属当量浓度表现为废车用润滑油>废液压油>废淬火油>废冷冻机油>废防锈油>废白油。其中,废车用润滑油和废液压油的重金属潜在危害最高。废矿物油再生利用过程中,重金属绝大部分进入废渣中(如油渣、蒸馏残渣、废白土等),少部分残留在再生产品中;焚烧处置过程中,重金属的去向为烟气和底灰。因此,需要针对废矿物油的处置与资源化利用过程进行严格管理,防止其中重金属的二次污染。     

Comparison on surface properties and desulfurization of MnO2 and pyrolusite blended activated carbon by steam activation

In this study, MnO₂ and pyrolusite were used as the catalysts to prepare modified activated carbon, that is, AC-Mn and AC-P, respectively, from coals by blending method and steam activation. The Brunauer–Emmett–Teller (BET) results indicated that the AC-P had higher surface areas and micropore volumes than the AC-Mn with the same blending ratio. The relative contents of basic functional groups (i.e., C = O, π-π*) on AC-P were slightly lower than those on AC-Mn, while both contained the same main metal species, namely, MnO. The desulfurization results showed that with 3 wt% of blending ratio, AC-Mn3 and AC-P3 had higher sulfur capacities at 220 and 205 mg/g, respectively, which were much higher than for the blank one (149.6 mg/g). Moreover, the AC-P had relatively higher sulfur capacity than the AC-Mn with the same contents of Mn, which might be attributed to the existence of other metals in pyrolusite. After the desulfurization process, MnO were gradually transferred into MnSO₄, and the relative contents of basic functional groups decreased evidently for both AC-Mn3 and AC-P3. The results demonstrated that pyrolusite could be one good alternative to MnO₂ to prepare modified activated carbon for desulfurization.

Implications: MnO₂ and pyrolusite were used as the additives to prepare modified activated carbon from coals by a blending method and by steam activation, that is, AC-Mn and AC-P, respectively. The AC-P had higher surface areas and micropore volumes than the AC-Mn with the same blending ratio. The AC-Mn and AC-P had higher sulfur capacities than a blank one. Moreover, the AC-P had relatively higher sulfur capacity than the AC-Mn with the same contents of Mn. The results demonstrated that pyrolusite could be one good alternative to MnO₂ to prepare modified activated carbon for desulfurizatio.