Photolysis of fluometuron in the presence of natural water constituents

Phototransformation of the herbicide fluometuron (1 microM) in natural sunlight was investigated in neutral Milli-Q water and in synthetic waters containing either fulvic acids, nitrate ions or both in order to mimic reactions taking place in aquatic environments. Fluometuron degradation followed a pseudo-first order kinetics. The reaction was faster in synthetic than in Milli-Q water. Fulvic acids (10 mg l(-1)) increased the rate of fluometuron photolysis by a factor 2.5 and nitrates (25 mg l(-1)) by a factor 15. Identification of major photoproducts was conducted under laboratory conditions using LC-ESI-MS. Numerous photoproducts were detected and tentatively characterized. In the presence of nitrates, hydroxylation of the aromatic ring with or without hydrolysis of CF(3) into CO(2)H and oxidation of the urea chain leading to demethylation were observed. In the presence of fulvic acids, hydroxylation of the aromatic ring was the major reaction route.     

The use of sewage sludge as remediation for imidacloprid toxicity in soils

Environmental Science and Pollution Research - This study investigated the influence of the sewage sludge (SS) soil amendment on the chronic toxicity of imidacloprid (through the seed dressing...     

Fostering green innovation in achieving sustainable performance

Nowadays, sustainable development has been underlined as critical in relation to firm performance and is becoming a global concern. Green innovation is believed to be a fundamental approach to environmental protection and determines the firms' competitiveness. Many factors drive the success of adopting green innovation. Unfortunately, many studies generally focus on large industries. This study investigates the influence of the firms' external pressure and internal factors simultaneously on the adoption of green innovation in small enterprises in developing countries. We conceptualized the four factors that may determine the successful implementation of green innovation to achieve sustainable performance, including environmental regulations, customer pressure, resources and capabilities, and management commitment. Data were gathered from 160 food sector SMEs in Malang Raya, Indonesia. Data analysis used structural equation modeling with the partial least squares approach (SEM-PLS). The empirical results conclude the positive effects of customer pressure, resources and capabilities, and commitment management on green innovation, which in turn had a positive on sustainable performance. The results also confirmed that environmental regulations did not significantly impact green innovation. The findings provide valuable contributions and encourage SMEs to foster green innovation's potential for better sustainable performance and competitive advantage. The findings also offer integrated perspectives on how firms should be more innovative toward sustainability.     

Sexual segregation in timing of foraging by imperial shags (Phalacrocorax atriceps): is it always ladies first?

The time seabirds have to forage is restricted while breeding, as time at sea must be balanced against the need to take turns with the partner protecting the nest site or offspring, and timing constraints change once the breeding season is over. Combined geolocator-immersion devices were deployed on eleven Imperial Shags (four males and seven females) in Argentina (43°04′S; 64°2′W) in November 2006 and recovered in November 2007. During the breeding season, females foraged throughout the morning, males exclusively in the afternoon, and variability between individuals was low. Outside the breeding season, both sexes foraged throughout the day, and variability between individuals was high. Timing differences may be explained by higher constraints on foraging or greater demands of parental duties experienced by the smaller sex, females in this case. Sexual differences in reproductive role, feeding habits or proficiency can also lead to segregation in timing of foraging, particularly while breeding.     

Climate change and population genetic structure of marine species

Climate change influences populations by reducing or extirpating local populations, by disrupting patterns of migration and by shifting geographical distributions. These events can affect genetic population structure in several ways. Molecular markers have been used in numerous population genetic and phylogeographical studies of marine species and have detected population responses to climate change in the last few decades, such as range expansions, adaptative shifts and declines or increases in abundance. Little is known, however, about the molecular and physiological basis of adaptive responses to climate change in marine Mediterranean species. The Mediterranean Sea ecosystem is a ‘living laboratory’ with native species that are challenged by environmental change and by invasive species and a ‘gene-climate’ approach should be adopted as a way of focusing on the relationship between climate warming and genetic diversity.     

Environmental assessment of ester-based lubricants after application

GOAL, SCOPE AND BACKGROUND: Lubricants based on renewable resources are an environmentally friendly alternative to petrochemical products due to their better ecotoxicological performance and their excellent biodegradability. To improve the technical performance of lubricants, and to reduce friction and wear, the use of additives is nowadays obligatory. The collaborative research center SFB 442 aims at developing environmentally acceptable lubricants that facilitate the avoidance of these additives by transferring their function to suitable coatings. For a complete assessment of the ecological performance of these newly developed lubricants, the whole life cycle including production, application as well as disposal and fate in the environment is studied. In the following study the focus was on the application and its influence on the environmental behavior of the lubricant. The application of lubricants leads, among other things, to the intake of metals due to abrasion from tools, work pieces or mechanical components. Previous examinations indicated a possible influence of metals on the toxicity of eluates prepared from used lubricants (Erlenkaemper et al. 2005). To clarify if the apparent toxicity of used lubricants solely results from the intake of metals, the extractability of these metals from the oil matrix is determined. By combining chemical analyses with bioassays, the bioavailability of metals that are present in the extract is estimated. To further investigate the relevance of metals on toxicity, toxic units (TU) were calculated and related to the results of the bioassays. Interactions between the metals were investigated with aqueous mixtures of metal chlorides and calculations based on the concept of concentration addition and independent action. METHODS: A lubricant mixture was applied to a tribological test bench that simulates real conditions of use and extremely short time load, respectively. Samples were taken at particular times, water soluble fractions (WSF) of these fluids were prepared and dilution series were investigated in several bioassays. Concentration of metals and total organic carbon (TOC) were determined in the eluates. TUs were calculated according to Sprague (1970) and mixture toxicity was calculated according to the concept of concentration addition (Loewe and Muischnek 1926) and independent action (Bliss 1939). RESULTS: Analyses of the metal content of the lubricant and the eluates clearly revealed the availability of the metals in the aqueous extracts. Especially copper, zinc, nickel and chromium were found and their concentrations increased during the time of use. The water extractable fraction, e.g., of copper, rose from 8.8% to 45.3% of the total content in the lubricant after 33.5 hours of use. Tests performed with the algal growth inhibition assay and the luminescence inhibition assay revealed the uptake or absorption by the organisms and, thus, the bioavailability of the metals. The calculation of TUs partly indicated a possible influence of the metals on ecotoxicity of the eluates. Copper reached concentrations equal to or higher than the EC50 value of copper chloride in the growth inhibition assays with algae and Ps. putida as well in the immobilization assay with daphnids. TUs for copper are also larger than 1 for the algal growth inhibition assay. The EL50 values indicated that the luminescence inhibition assay was the most sensitive test system, with values between 4.7% and 9.6%. While the toxicity towards algae and V. fischeri in the growth inhibition assay decreased until both organisms were no longer influenced by the exposure, the EL50 values for the D. magna immobilization assay and the Ps. putida growth inhibition assay decreased with the progressing use of the lubricant. The tested metal salt mixtures showed that Ps. putida, algae and daphnids are the most sensitive organisms with EC50 values below 1 mg/l. DISCUSSION: Although the intake of metals mainly occurred via abrasion of particles, the results revealed the availability of these metals in water. The availability varied for each of the four metals. For both the algal growth inhibition assay and the luminescence inhibition assay, an uptake or absorption of the metals could be demonstrated. The calculated TUs indicated an effect in some bioassays that was not verified in the test itself. The influence of copper on V. fischeri, for example, was not confirmed while the EL50 values for the daphnid bioassay decreased, meaning that the eluates became more toxic with progressing use of the lubricant. The calculations of mixture toxicity based on the concept of concentration addition demonstrated good correlations with the tested metal mixtures, but also a different sensitivity of the organisms. CONCLUSIONS: The results presented here reveal the availability of those metals in water that were taken in during the use of the lubricant in a tribological test bench and, thus, have the possibility of interacting with the organisms. The availability of the metals in the bioassays was proven by chemical analyses. The calculation of TUs and the corresponding EL50 values, however, indicate different availabilities of the metals. The results of the metal salt mixtures show good correlations with calculations of mixture toxicity based on concentration addition. Moreover, the varying sensitivity of the organisms when exposed to eluates or metal mixtures indicates a different bioavailability of the metals and/or the presence of other compounds that exert toxic action. RECOMMENDATIONS AND PERSPECTIVES: For further investigations, the organic oil matrix and its influence on the toxicity have to be taken into account. The toxicity of the eluates may not only be due to metals; additional effects could arise from changes in the lubricant itself.     

A screening model for fate and transport of biodegradable polyesters in soil

A numerical model for predicting the fate and transport of biodegradable polyester residues in soil, following successive applications of mulch film, was developed and applied. The polymer, applied on surface soil, was assumed to be converted into by-products (monomers), according to a first order kinetics with constant K(1deg). The monomers released were assumed to sorb on soil organic matter (according to a first-order kinetics with constant K(s)), to be leached with the seepage water, through vertical advection and hydrodynamic dispersion, and biodegraded (according to a first-order kinetics with constant K(b)). Results suggested that, to assess a possible build-up of mulch film (as a polymer) on the surface soil, the degradation constant K(1deg) relating the polymer conversion to by-products should be known, whereas the biodegradation constant K(b) indicates there is no danger of groundwater pollution. Likewise, on the basis of by-product concentration in deep soil, soil pollution should not occur.     

Concentrations and determinants of outdoor, indoor and personal nitrogen dioxide in pregnant women from two Spanish birth cohorts

Determinants of outdoor, indoor and personal concentrations of nitrogen dioxide (NO₂) were assessed in a subset of pregnant women of the Spanish INMA (Environment and Childhood) Study. Home indoor and outdoor NO₂ concentrations were measured during 48 h with passive samplers for 50 and 58 women from the INMA cohorts of Valencia and Sabadell, respectively. Women from Sabadell also carried personal NO₂ samplers during the same period. Data on time–activity patterns, socio-economic characteristics, and environmental exposures were obtained through questionnaires. Multiple linear regression models were developed to predict NO₂ levels.In Valencia, median outdoor NO₂ levels (42 µg/m³) were higher than median indoor levels (36 µg/m³). In Sabadell, personal NO₂ showed the highest median levels (40 µg/m³), followed by indoor (32 µg/m³) and outdoor (29 µg/m³) levels. Personal exposure to NO₂ correlated best with the indoor NO₂ levels. Temporal and traffic-related variables were significant predictors for outdoor NO₂ levels. Thirty-two percent of the indoor NO₂ variability in the two cohorts was explained by outdoor NO₂ levels and the use of the gas appliances. The model for personal exposure accounted for 59% of the variance in NO₂ levels in Sabadell with four predictor variables (outdoor and indoor NO₂ levels, time spent in outdoor environments and time exposed to a gas cooker). No significant association was found between personal or indoor NO₂ levels and exposure to environmental tobacco smoke (ETS) at home.Personal NO₂ levels were found to be strongly influenced by indoor NO₂ concentrations. The study supports the use of time–activity patterns along with indoor measurements to predict personal exposure to traffic-related air pollution.     

Geophagy: soil consumption enhances the bioactivities of plants eaten by chimpanzees

Geophagy, the deliberate ingestion of soil, is a widespread practice among animals, including humans. Although some cases are well documented, motivations and consequences of this practice on the health status of the consumer remain unclear. In this paper, we focused our study on chimpanzees (Pan troglodytes schweinfurthii) of the Kibale National Park, Uganda, after observing they sometimes ingest soil shortly before or after consuming some plant parts such as leaves of Trichilia rubescens, which have in vitro anti-malarial properties. Chemical and mineralogical analyses of soil eaten by chimpanzees and soil used by the local healer to treat diarrhoea revealed similar composition, the clay mineralogy being dominated by kaolinite. We modelled the interaction between samples of the two types of soil and the leaves of T. rubescens in gastric and intestinal compartments and assayed the anti-malarial properties of these solutions. Results obtained for both soil samples are similar and support the hypothesis that soil enhances the pharmacological properties of the bio-available gastric fraction. The adaptive function of geophagy is likely to be multi-factorial. Nevertheless, the medical literature and most of occidental people usually consider geophagy in humans as an aberrant behaviour, symptomatic of metabolic dysfunction. Our results provide a new evidence to view geophagy as a practice for maintaining health, explaining its persistence through evolution.     

Production of zeolitic materials in pilot scale based on coal ash for phosphate and potassium adsorption in order to obtain fertilizer

Environmental Science and Pollution Research - The use of different types of zeolites (X, Na-P1, and 4A) synthesized by different methods and scales were tested in this work to adsorb nutrients...