Assessment and spatial distribution of groundwater quality in industrial areas of Ghaziabad, India

An attempt has been made in this study to evaluate the groundwater quality in two industrial blocks of Ghaziabad district. Groundwater samples were collected from shallow wells, deep wells and hand pumps of two heavily industrialized blocks, namely Bulandshahar road industrial area and Meerut road industrial area in Ghaziabad district for assessing their suitability for various uses. Samples were collected from 30 sites in each block before and after monsoon. They were analyzed for a total of 23 elements, namely, Ag, Al, As, B, Ba, Be, Ca, Cd, Co, Cr, Cu, Fe, K, Mg, Mn, Na, Ni, P, Pb, Se, U, V, and Zn. In addition to these elements, some other parameters were also studied viz: color, odor, turbidity, biological oxygen demand, chemical oxygen demand (COD), dissolved oxygen, total dissolved solids and total suspended solid. The water quality index was also calculated based on some of the parameters estimated. Out of the 23 elements, the mean values of 12 elements, namely, Al, As, Ca, Cd, Cr, Mg, Mn, Na, Ni, Pb, Se, and U, were higher than the prescribed standard limits. The concentrations (in milligram per liter) of highly toxic metals viz., Al, As, Cd, Cr, Ni, Pb, Se, and U, ranged from 1.33–6.30, 0.04–0.54, 0.005–0.013, 4.51–7.09, 0.14–0.27, 0.13–0.32, 0.16–2.11, and 0.10–1.21, respectively, in all groundwater samples, while the permissible limits of these elements as per WHO/BIS standards for drinking are 0.2, 0.01, 0.003, 0.05, 0.07, 0.01, 0.04, and 0.03 mg L^?1, respectively. The EC, pH, and COD in all samples varied from 0.74–4.21, 6.05–7.72, and 4.5–20.0 while their permissible limits are 0.7 dS m^?1, 6.5–8.5, and 10 mg L^?1, respectively. On the basis of the above-mentioned parameters, the water quality index of all groundwater samples ranged from 101 to 491, and 871 to 2904 with mean value of 265 and 1,174 based on two criteria, i.e., physico-chemical and metal contaminations, respectively while the prescribed safe limit for drinking is below 50. The results revealed that the groundwater in the two blocks is unfit for drinking as per WHO/BIS guidelines. The presence of elements like As, Se, and U in toxic amounts is a matter of serious concern.     

A comparative study on cost analysis,efficiency, and process mechanism of effluent treatment plants in Bangladesh

Investigations were conducted into the treatment of effluents produced during manufacturing processes at both a chemicals production facility and a paint manufacturing facility. A comparison of costs of wastewater treatment at both facilities was also performed. The untreated effluents from both facilities were high in biological oxygen demand (BOD), chemical oxygen demand (COD), and total dissolved solids (TDS). In addition, the effluents from the two facilities deviated significantly in dissolved oxygen (DO) content and pH levels. However, both facilities ultimately released treated wastewater with allowable amounts or levels of BOD, COD, TDS, DO, and pH as permitted by the Department of the Environment, Ministry of Environment and Forests, Bangladesh (DOE). The effluent treatment plants (ETP) at both facilities contained combinations of chemical and biological treatment processes. The treatment processes used at the chemicals production facility and at the paint manufacturing facility were continuous and semi‐batch processes, respectively. The biological treatment section of the ETP at the chemicals production facility has both anaerobic and aerobic units, while the paint manufacturing facility has only an aerobic unit. Annual installation and operation costs of the ETP at the chemicals production facility was Bangladeshi Taka (Tk) 1,300,000 ($16,667 US dollars) and Tk 800,000 ($10,257), respectively. The annual installation and operation costs of the ETP at the paint manufacturing facility were Tk 3,050,000 ($39,103) and Tk 6,200,000 ($79,488), respectively.     

Use of fly ash for the removal of phenol and its analogues from contaminated water

This work attempts to elucidate the effects of different operational variables affecting the mechanistic function of fly ash for removal of some priority organic pollutants viz. phenol and its analogues. Thermodynamic parameters like free energy change, enthalpy and entropy of the process, as well as the sorption isotherms for phenols on fly ash, were measured and the most suitable isotherm was determined. Results of the study indicate that the extent of solute removal is determined by the initial solute concentration, molecular size and molecular arrangement of the solute. At the fixed set of experimental conditions, a model equation can be developed from which the percent removal corresponding to the load of the particular solute is determined. It is assumed that the mechanism of adsorption is governed by the surface characteristics of fly ash; pH has a vital role in influencing the solute removal as both the ionizing power (acidity, pKa) of the solutes and the zero point charge of fly ash (pH(ZPC)) depend on the solution pH. Isotherm pattern and the free energy change indicate that the process is favorable, as well as spontaneous. The information gathered from the study will serve as a predictive modeling procedure for the analysis and design of the removal of organic pollutants and decontamination of water. The leaching experiment indicates that the retained solutes do not release from fly ash. The retained solutes can be recovered and utilized as industrial raw material.     

Sustainability of metal recovery from E-waste

The issue of E-waste disposal is concerning all the stakeholders, from policymakers to the end users which have accelerated the research and development on environmentally sound disposal of E-waste. The recovery of metals (gold, tantalum, copper, iron etc.) from E-waste has become an important focus. The mechanical recycling, thermo-chemical processes like pyrolysis, pyro-, hydro- and biometallurgical processes can play important roles in the Metal Recovery from E-waste (MREW) technology. For the industrial application of the MREW technology, it is important to analyze the sustainability. In this paper, two case studies have been presented on E-waste recycling industries in India and China. Based on the literature data, an attempt has been made to assess qualitatively the overall sustainability of MREW technology considering the three pillars, i.e., environmental, economic and social. Two conceptual frameworks with (Option-2) and without (Option-1) pyrolysis for integrated MREW units have been developed and the generalized energy and environmental impact analysis has been made using the principles of LCA. The impacts of two options have been compared. Option 2 has been found to be more efficient and sustainable. It has been realized that climate change, fossil fuel depletion, water depletion, eutrophication, acidification, fresh and marine water ecotoxicity are possible impact categories. The recommendations based on the generalized assessment are in good agreement with the findings of previous researchers on individual steps of MREW unit. The findings of this paper are expected to be beneficial to researchers and stakeholders for research directions and decision making on MREW.

Open image in new window

     

Organically Modified Nanoclay and Aluminum Hydroxide Incorporated Bionanocomposites towards Enhancement of Physico-mechanical and Thermal Properties of Lignocellulosic Structural Reinforcement

A range of bio-nanocomposites were prepared by incorporation of organo modified montmorillonite nanoclay (OMMT) with or without use of aluminum hydroxide (Al(OH)₃) within polylactic acid (PLA) solution. Furthermore, the solution was employed for modification of ligno-cellulosic (jute) fabric structural reinforcements. The successful incorporation of nanofillers within the host polymer, polylactic acid (PLA) was confirmed by Fourier-transform infrared spectroscopy (FT-IR). Water uptake and swelling behaviour studies revealed that the water uptake and swelling ratio of bio-composites reduced significantly as compared to pristine jute fabric, whereas upon incorporation of OMMT and Al(OH)₃, the water barrier properties reduced even further in the developed bio-nanocomposites. The flexural strength of the bio-nanocomposites also showed improved mechanical and dimensional stability. Synergistic effects of OMMT and Al(OH)₃ were observed in enhancing the aforementioned physico-mechanical properties. Scanning electron microscopy (SEM) studies revealed microstructural details of developed samples. Similarly, the thermo-gravimetric analysis and linear burning rate studies of Al(OH)₃ treated bio-nanocomposite materials revealed enhanced thermal resistance and reduced flammability respectively compared to both pristine woven jute fabric and fabrics treated with PLA alone or those without Al(OH)₃. From the above results it can safely be said that the bio-nanocomposite material can be a prospective candidate for development of flame retardant biopackaging.     

Deltamethrin-induced alterations in serum calcium and prolactin cells of a freshwater teleost,Heteropneustes fossilis

Deltamethrin, a pyrethroid insecticide widely used in many countries, causes significant adverse effects in aquatic ecosystems. The concentration of deltamethrin in water reservoirs and the run off from agricultural areas (in water) in many countries range up to 24.0?µg?L^?1 which is higher than the recommendation of the European Union standard. Hence, in this study the effects of deltamethrin were investigated, i.e. its toxic impacts on the freshwater catfish Heteropneustes fossilis in terms of serum calcium and prolactin cells (located in the rostral pars distalis region of the pituitary). The fish were subjected to deltamethrin for a short-term experiment (96?h; 1.5?µg?L^?1 e.0.8 of 96?h LC₅₀) and a long-term experiment (28 days; 0.37?µg?L^?1 e.0.2 of 96?h LC₅₀). After short-term deltamethrin exposure, serum calcium levels decrease. No histological change in prolactin cells is noticed throughout the short-term experiment. Fish exposed to deltamethrin for 7 days also exhibit a decrease in serum calcium level. This decrease persisted until the end of the experiment (28 days). Prolactin cells of fish treated for 14 days with deltamethrin exhibit increased nuclear volume and degranulation, increasing progressively from the 21st day onwards. After 28 days, a few degenerated cells are discerned. The results of this study show that deltamethrin is moderately toxic for the freshwater fish H. fossilis by producing adverse effects on serum calcium and prolactin cells. Hence, it should be used with caution in areas near fish-inhabited waters.     

Precipitation Chemistry and Occurrence of Acid Rain Over Dhanbad, Coal City of India

The present study investigated the chemical composition of wet atmospheric precipitation over Dhanbad, coal city of India. The precipitation samples were collected on event basis for three years (July 2003 to October 2005) at Central Mining Research Institute. The precipitation samples were analyzed for pH, conductivity, major anions (F, Cl, NO₃, SO₄) and cations (Ca, Mg, Na, K, NH₄). The pH value varied from 4.01 to 6.92 (avg. 5.37) indicating acidic to alkaline nature of rainwater. The pH of the rainwater was found well above the reference pH (5.6), showing alkalinity during the non-monsoon and early phase of monsoon, but during the late phase of monsoon, pH tendency was towards acidity (<5.6~pH) indicating the non-availability of proper neutralizer for acidic ions. The observed acidic events at this site were 91, (n = 162) accounting 56% for the entire monitoring months. The (NO₃ + Cl)/SO₄ ratio in majority of samples was found below 1.0, indicating that the acidity is greatly influenced by SO₄. The calculated ratio of (Ca + NH₄)/(NO₃ + SO₄) ranges between 0.42–5.13 (average 1.14), however in most of the samples, the ratio is greater than unity (>1.0) indicating that Ca and NH₄ play an important role in neutralization of acidic ions in rainwater. Ca and SO₄ dominate the bulk ionic deposition and these two ions along with NH₄ accounts 63% of the annual ionic deposition.     

Blade thickness effect on the aerodynamic performance of an asymmetric NACA six series blade vertical axis wind turbine in low wind speed

ABSTRACT

Vertical axis wind turbine (VAWT) is an economic and widely used energy converter for converting wind energy into useful form of energy, like mechanical and electrical energy. For efficient energy conversion in low wind speed and to have improved power coefficient of asymmetric blade VAWT, selection of optimum blade thickness is needed thus entailing its detailed investigation with respect to different operating wind speed conditions. Present study methodically explores the impact of thickness to chord (t/c) ratio on aerodynamic performance of a three bladed asymmetrical blade H-Darrieus VAWT at different low wind speed conditions by using 2D unsteady CFD simulations. The optimal t/c is obtained on the basis of maximum power coefficient and average moment coefficient of the turbine. The aerodynamic performance curves are obtained at different operating and t/c conditions and the performance insights are corroborated with the findings from the flow physics study to come to some concrete conclusions on the effects of the thickness to chord ratio. The present study identifies large blade curvature to create a large diverging passage on the blade suction surface as the prominent reason for aerodynamic performance drop at a high t/c ratio.     

Assessment of radon concentration and heavy metal contamination in groundwater of Udhampur district,Jammu &amp; Kashmir,India

Radon concentration was measured in water samples of 41 different locations from Udhampur district of Jammu & Kashmir, India, by using RAD7 and Smart RnDuo monitor. The variation of radon concentration in water ranged from 1.44 ± 0.31 to 63.64 ± 2.88 Bq L^?1, with a mean value of 28.73 Bq L^?1 using RAD7 and 0.64 ± 0.28 to 52.65 ± 2.50 Bq L^?1, with a mean value of 20.30 Bq L^?1 using Smart RnDuo monitor, respectively. About 17.07% of the studied water samples recorded to display elevated radon concentration above the reference range suggested by United Nation Scientific Committee on the Effects of Atomic Radiations (UNSCEAR). The mean annual effective dose of these samples was determined, and 78.95% samples were found to be within the safe limits set by World Health Organisation (WHO) and European Council (EU). The study revealed good agreement between the values obtained with two methods. Heavy metals (Zn, Cd, Fe, Cu, Ni, As, Hg, Co, Pb and Cr) were determined in water samples by microwave plasma atomic emission spectrometer, and their correlation with radon content was also analysed.     

Phytoconstituents evaluation and antihyperglycemic and antihyperlipidemic effects of Mahonia leschenaultia Takeda in streptozotocin-induced diabetic rats

Hyperlipidemia is an associated complication of diabetes mellitus. Many spices and herbs are known to be hypoglycemic. Mahonia leschenaultia Takeda (Berberidaceae) (MLT) is a traditional medicinal plant that is commonly used against diseases in India and other Asian countries. The aim of this study is to identify the phytoconstituents by gas chromatography–mass spectrography (GC–MS) and evaluate the antihyperglycemic and antihyperlipidemic effects of the ethanol extract of MLT on streptozotocin (STZ)-induced diabetic rats. Phytoconstituents like oleicacid, 9,12-octadecadienoic acid (Z, Z)-n-hexadecanoic acid were identified as high % peak when compared with other compounds by GC–MS. STZ-induced diabetic animals were fed with plant extracts at different doses (250 or 500 mg kg^?1 body wt) of ethanol extract of MLT. The results of the study revealed a significant increase in total hemoglobin and glycosylated hemoglobin along with the reduction in hyperglycemia and hyperlipidemia effects in MLT-treated STZ-induced diabetic rats compared to diabetic only rats. Further, ethanol extracts of MLT-treated animals at 500 mg kg^?1 showed that shrinkage of β cells of islets of Langerhans was restored as evidenced by histological studies of pancreas of diabetic animals. Thus the ethanol extract of MLT might serve as a reliable adjuvant for antihyperglycemic and antihyperlipidemic effects of STZ, and may be promising for development of phytomedicines for diabetes mellitus.