Biological removal of selenate in saline wastewater by activated sludge under alternating anoxic/oxic conditions

Removal of selenate in saline wastewater by activated sludge was examined. Sequencing batch reactor was operated under alternating anoxic/oxic conditions. Above 97% removal of soluble selenium (Se) was achieved continuously. Major Se removal mechanism varied depending on the length of aeration period. Various Se-reducing bacteria likely contributed to coordinately to Se removal. Selenium (Se)-containing industrial wastewater is often coupled with notable salinity. However, limited studies have examined biological treatment of Se-containing wastewater under high salinity conditions. In this study, a sequencing batch reactor (SBR) inoculated with activated sludge was applied to treat selenate in synthetic saline wastewater (3% w/v NaCl) supplemented with lactate as the carbon source. Start-up of the SBR was performed with addition of 1–5 mM of selenate under oxygen-limiting conditions, which succeeded in removing more than 99% of the soluble Se. Then, the treatment of 1 mM Se with cycle duration of 3 days was carried out under alternating anoxic/oxic conditions by adding aeration period after oxygen-limiting period. Although the SBR maintained soluble Se removal of above 97%, considerable amount of solid Se remained in the effluent as suspended solids and total Se removal fluctuated between about 40 and 80%. Surprisingly, the mass balance calculation found a considerable decrease of Se accumulated in the SBR when the aeration period was prolonged to 7 h, indicating very efficient Se biovolatilization. Furthermore, microbial community analysis suggested that various Se-reducing bacteria coordinately contributed to the removal of Se in the SBR and main contributors varied depending on the operational conditions. This study will offer implications for practical biological treatment of selenium in saline wastewater.     

Nutrient export and material recycling using aquatic plants: Lake Kitagata case study

Lake Kitagata in Fukui Prefecture, Japan, was examined to collect fundamental data on nutrient export and material recycling using the native aquatic plants, common reed and wild rice. Common reed was located all over the lake shore, while wild rice was in the upper part of the lake. On average, the nutrient content was nitrogen: 2.1 and 2.6?%, P₂O₅: 0.38 and 0.64?%, K₂O: 2.1 and 2.4?% for common reed and wild rice, respectively, and decreased along with their growth. If harvested in October, the nitrogen and phosphorus exported from the lake were estimated to be only 1.1 and 1.9?% of the inflow, respectively. Methane fermentation of these plants showed an average of 134 and 150?mL-CH₄/g-VS added for common reed and wild rice, respectively, indicating possible use as an auxiliary source. The composting of these plants mixed with chicken manure, bean curd and rice bran was successful, and the products were rich in the major nutrients and well-balanced. A pretreatment method combining sulfuric acid and thermal treatment was able to convert about 50?% of cellulose in common reed to glucose, the precursor for bioethanol production. Therefore, these technologies are demonstrated to be helpful for the beneficial use of the biomass.     

Convenient dioxin measuring method using an efficient sampling train, an efficient HPLC system and a highly sensitive HRGC/LRMS with a PTV injector

An efficient sampling method for dioxins from flue gas, an efficient automatic purification and fractionation method by a new HPLC system using a sulfuric acid-silica/silica column, a Nitro column and a PGC column, and sensitive determination method by an economical HRGC/LRMS using a programmable temperature vaporization (PTV) injector were developed. It was confirmed that the dioxins could be easily collected by the proposed simple sampling train consisting of only two bottles, and the extracted sample could be purified sufficiently and separated as mono-ortho PCBs, non-ortho PCBs and PCDDs/PCDFs completely with the proposed HPLC system. The peak areas of GC/MS were increased linearly with the injection volume up to 40 microl by the PTV technique, and the sensitivity could be increased to 20 times higher than usual. This convenient measuring method can drastically reduce operation time, consumption of hazardous solvent and cost.     

Decomposition reactions of epoxy resin and polyetheretherketone resin in sub- and supercritical water

Epoxy resin and polyetheretherketone (PEEK) resin were decomposed into their monomers such as phenol, cresols, and their analogues by thermal treatment in sub- and supercritical water in a 10-ml tubing bomb reactor. The addition of basic compounds such as Na₂CO₃ was effective in promoting the decomposition reaction of the resins. In the reaction of epoxy resin, the yield of identified products reached 10% for the reaction at 703K over 1h. In the reaction of PEEK resin, the total yield of phenol and dibenzofuran reached 88% for the reaction at 703K over 3h. Chemical participation of water in the decomposition reaction was confirmed by the reaction of dinaphthylether.     

Synthesis of novel polymer type sulfoxide solid phase combined with the porogen imprinting for enabling selective separation of polychlorinated biphenyls

We developed a novel polymer type sulfoxide-modified solid phase enabling to achieve selective separation of polychlorinated biphenyls (PCBs) from insulation oil. In this study, firstly we prepared base-polymer based on the concept of the molecular imprinting to capture PCBs in selectively, then, the sulfoxide groups were modified on the pore surface of base-polymers by changing preparation methods. As results of liquid chromatographic analyses for the polymers as columns, the base-polymer prepared by xylene as a porogenic solvent showed selective retention ability for chlorinated aromatic compounds by the porogen imprinting effect. Additionally, the polymer-type sulfoxide solid phases showed highly retention ability for PCBs by increasing amount of introduced sulfoxide groups. Consequently, the results of separation of PCBs comparing to insulation oil suggested that the prepared solid phase can be used for the selective separation of PCBs at the same level as a commercially available media utilized for the regulated method.     

Photodecomposition of humic acid and natural organic matter in swamp water using a TiO2-coated ceramic foam filter: Potential for the formation of disinfection byproducts

This paper reports on the photodecomposition of aqueous humic acid (HA) by a TiO₂-coated ceramic foam filter (TCF) reactor and on the potential for the formation of disinfection byproducts (DBPs) upon chlorination of the photocatalytically treated solutions. This photocatalytic reactor can also be applied to the removal of natural organic matter (NOM) in swamp waters. The proposed photocatalytic reaction system was operated as per standardized methodologies. First, the ability of the TCF to decompose HA (a representative compound of NOM) was evaluated from the changes in the total organic carbon (TOC) and UV₂₅₄ with the reaction time. Remarkably, TOC removal and UV₂₅₄ values ranging from 44% to 61% and from 60% to 83%, respectively, were achieved. The potential for the formation of DBPs (total trihalomethane and total haloacetic acid) by chlorination of the phototreated solution was strongly dependent on the TOC removal and UV₂₅₄ values in the solution. The degree of photodecomposition of NOMs in the swamp water samples and the DBP formation potential showed similar trends as in the case of the standard solutions containing HA. The method used in this study could be effectively used to evaluate the efficiency of TCF for reducing HA and NOM, while suppressing the formation of DBP products.     

Addressing global responsibility for conservation through cross-cultural collaboration: <Emphasis Type="Italic">Kodama Forest,a forest of tree spirits</Emphasis>

A commitment to conservation of a place is based on the sense of place expressed by its “conceptual community”, including those who are not its residents in the geographical sense, but who nonetheless identify with it for various reasons. With the global nature of environmental issues being clearly recognized, such communities form a “terrain of consciousness” (Berg and Dasmann 1978), extending responsibility for conservation across cultures, time and space. Although the social mobility and diversity brought about by today’s technology often work against the development of a sense of place, they also allow the formation of such conceptual communities, who can highlight local distinctiveness while at the same time positioning local issues in a global context, so generating a sense of global responsibility. In the case of Tasmania, Australia, recent international interest in its ecologically and culturally significant places, such as Recherche Bay and the Styx Valley, has intensified the focus on forest issues, building on Tasmania’s already well-recognized history of environmentalism. It is important that these issues be recognized in Japan in particular, where a rising awareness about climate change and mass consumerism has alerted the public to the problem of deforestation; however the fact that Tasmania is one of the major sources of woodchips for paper production is not widely known. Awareness by the consumer, it is argued, is a foundation for forming a sense of global responsibility and it is necessary to form a conceptual community of those committed to the same issue. Cross-cultural collaboration is therefore necessary, and creativity can be an effective facilitating agent for this. This paper illustrates this point, through the example of the Kodama Forest, a forest of tree spirits, in North East Tasmania, that arose from such a collaboration between a group of Japanese students and a local community group. The collaboration also facilitated meaningful learning opportunities for the students, who chose to study in Tasmania because of its natural environment. The forest now provides a cultural heritage that also defines the evolution of this conceptual community through on-going collaboration. The importance of human connection at all levels, local, regional and global, in promoting environmental sustainability is addressed through the example of this forest.     

Pharyngeal aspiration of single-wall carbon nanotubes aggravates allergic reaction to inhaled ovalbumin in mice

Single-wall carbon nanotubes are a major type of nano-objects that have industrial applications such as fuel cells. In this study, four types of single-wall carbon nanotubes and their abilities to aggravate allergic reactions were examined: those containing Fe, those containing Ni, and the corresponding purified metal-free ones. These were administered to mice via pharyngeal aspiration. Subsequently, the mice inhaled ovalbumin a total of eight times over three weeks. After inhalation of ovalbumin, the concentrations of total immunoglobulin E and ovalbumin-specific immunoglobulin E in serum increased in mice treated with purified metal-free and Fe containing single-wall carbon nanotubes while those containing Ni did not affect total and ovalbumin-specific immunoglobulin E levels. Additionally, the purified metal-free and Fe containing nanotubes caused the gene expression of heme oxygenase-1, chemokine (C-X-C motif) ligand 2, and tumor necrosis factor-α, suggesting that some kinds of single-wall carbon nanotubes have the potential to aggravate allergic reactions via oxidative stress and inflammation. Incorporated metals do not seem to be involved in the aggravation of allergic reactions. Other physical properties, such as fiber length and aggregation state, may be involved in enhancing allergic reactions.