National-Level Wetland Policy Specificity and Goals Vary According to Political and Economic Indicators

Environmental Management - Growing recognition of the importance of wetlands to human and ecosystem well-being has led countries worldwide to implement wetland protection policies. Different...     

Reconciling models and measurements to assess trends in atmospheric mercury deposition

Changes in atmospheric mercury deposition are used to evaluate the effectiveness of regulations controlling emissions. This analysis can be complicated by seemingly incongruent data from different model runs, model types, and field measurements. Here we present a case study example that describes how to identify trends in regional scale mercury deposition using best-available information from multiple data sources. To do this, we use data from three atmospheric chemistry models (CMAQ, GEOS-Chem, HYSPLIT) and multiple sediment archives (ombrotrophic bog, headwater lake, coastal salt marsh) from the Bay of Fundy region in Canada. Combined sediment and modeling data indicate that deposition attributable to US and Canadian emissions has declined in recent years, thereby increasing the relative significance of global sources. We estimate that anthropogenic emissions in the US and Canada account for 28-33% of contemporary atmospheric deposition in this region, with the rest from natural (14-32%) and global sources (41-53%).     

Size Distribution and Sources of Aerosol in Launceston,Australia, during Winter 1997

ABSTRACT

As part of a pilot study into the chemical and physical properties of Australian fine particles, a suite of aerosol samples was collected at Ti Tree Bend in Launceston, Tasmania, during June and July 1997. This period represents midwinter in the Southern Hemisphere, a period when aerosol sources in Launceston are dominated by smoke from domestic wood burning. This paper describes the results from this measurement campaign, with the aim of assessing the effect of wood smoke on the chemical and physical characteristics of ambient aerosol. A micro orifice uniform deposit impactor (MOUDI) was used to measure the size distributions of the aerosol from 0.05 to 20 n m aerodynamic diameter. Continuous measurements of fine particle mass were made using a PM_2.5 tapered element oscillating microbalance (TEOM) and light scattering coefficients at 530 nm were measured with nephelometers.

Mass size distributions tended to be bimodal, with the diameter of the dominant mode tending to smaller sizes with increases in total mass. Non-sea salt potassium and polycyclic aromatic hydrocarbons (PAHs) were used as chemical tracers for wood smoke. Wood smoke was found to increase absolute particle mass (enough to regularly exceed air quality standards), and to concentrate mass in a single mode below 1 μm aerodynamic diameter. The acid-base equilibrium of the aerosol was altered by the wood smoke source, with free acidity hydrogen ion, non-sea salt sulfate, and ammonium concentrations being higher and the concentration of all species, including nitrate (to differing extents), focused in the fine particle size ranges. The wood smoke source also heavily influenced the aerosol scattering efficiency, adding to a strong diurnal cycle in both mass concentration and light scattering.     

Likelihood Ratio Analysis of Skin Cancer Prevalence Associated with Arsenic in Drinking Water in the USA

Several published studies have examined skin-cancer prevalence in regions of the USA that have concentrations of arsenic above the USA drinking-water standard. Those studies with adequate exposure and health outcome data did not report any skin cancer cases. Because the USA's arsenic concentrations are relatively low compared to some other countries and the study populations are small, the absence of reported skin-cancer cases could be due to an absence of risk in USA populations or random variability from a predicted risk. We used the current EPA arsenic cancer slope factor (CSF) model, which is derived from Taiwanese populations exposed to high levels of arsenic, to predict the expected number of skin cancers. We then conducted a likelihood ratio analysis, which showed that a null hypothesis (no additional skin cancer risk from arsenic) was approximately 2.2 times more likely than the hypothesis that ingested arsenic causes the predicted rate of skin cancers. Although based on small numbers, our analysis of USA populations indicates that the CSF derived from arsenic exposure in Taiwanese populations may be an overestimate when applied to USA populations.     

pH,dissolved oxygen,and adsorption effects on metal removal in anaerobic bioreactors

Anaerobic bioreactors were used to test the effect of the pH of influent on the removal efficiency of heavy metals from acid-rock drainage. Two studies used a near-neutral-pH, metal-laden influent to examine the heavy metal removal efficiency and hydraulic residence time requirements of the reactors. Another study used the more typical low-pH mine drainage influent. Experiments also were done to (i) test the effects of oxygen content of feed water on metal removal and (ii) the adsorptive capacity of the reactor organic substrate. Analysis of the results indicates that bacterial sulfate reduction may be a zero-order kinetic reaction relative to sulfate concentrations used in the experiments, and may be the factor that controls the metal mass removal efficiency in the anaerobic treatment systems. The sorptive capacities of the organic substrate used in the experiments had not been exhausted during the experiments as indicated by the loading rates of removal of metals exceeding the mass production rates of sulfide. Microbial sulfate reduction was less in the reactors receiving low-pH influent during experiments with short residence times. Sulfate-reducing bacteria may have been inhibited by high flows of low-pH water. Dissolved oxygen content of the feed waters had little effect on sulfate reduction and metal removal capacity.     

Characterization of the archaeal community fouling a membrane bioreactor

Biofilmformation, one of the primary causes of biofouling, results in reducedmembrane flux or increased transmembrane pressure and thus represents a major impediment to the wider implementation of membrane bioreactor (MBR) technologies for water purification. Most studies have focused on the role of bacteria in membrane fouling as they are the most dominant and best studied organisms present in the MBR. In contrast, there is limited information on the role of the archaeal community in biofilm formation in MBRs. This study investigated the composition of the archaeal community during the process of biofouling in an MBR. The archaeal community was observed to have lower richness and diversity in the biofilmthan the sludge during the establishment of biofilms at low transmembrane pressure (TMP). Clustering of the communities based on the Bray-Curtis similarity matrix indicated that a subset of the sludge archaeal community formed the initial biofilms. The archaeal community in the biofilm was mainly composed of Thermoprotei, Thermoplasmata, Thermococci, Methanopyri, Methanomicrobia and Halobacteria. Among them, the Thermoprotei and Thermoplasmata were present at higher relative proportions in the biofilms than they were in the sludge. Additionally, the Thermoprotei, Thermoplasmata and Thermococci were the dominant organisms detected in the initial biofilms at low TMP, while as the TMP increased, the Methanopyri, Methanomicrobia, Aciduliprofundum and Halobacteria were present at higher abundances in the biofilms at high TMP.     

Trace metal content in inhalable particulate matter (PM<Subscript>2.5–10</Subscript> and PM<Subscript>2.5</Subscript>) collected from historical mine waste deposits using a laboratory-based approach

Mine wastes and tailings are considered hazardous to human health because of their potential to generate large quantities of highly toxic emissions of particulate matter (PM). Human exposure to As and other trace metals in PM may occur via inhalation of airborne particulates or through ingestion of contaminated dust. This study describes a laboratory-based method for extracting PM_2.5–10 (coarse) and PM_2.5 (fine) particles from As-rich mine waste samples collected from an historical gold mining region in regional, Victoria, Australia. We also report on the trace metal and metalloid content of the coarse and fine fraction, with an emphasis on As as an element of potential concern. Laser diffraction analysis showed that the proportions of coarse and fine particles in the bulk samples ranged between 3.4–26.6 and 0.6–7.6 %, respectively. Arsenic concentrations were greater in the fine fraction (1680–26,100 mg kg^?1) compared with the coarse fraction (1210–22,000 mg kg^?1), and Co, Fe, Mn, Ni, Sb and Zn were found to be present in the fine fraction at levels around twice those occurring in the coarse. These results are of particular concern given that fine particles can accumulate in the human respiratory system. Our study demonstrates that mine wastes may be an important source of metal-enriched PM for mining communities.     

The Validation of a Passive Sampler for Indoor and Outdoor Concentrations of Volatile Organic Compounds

Abstract

Volatile organlcs compounds (VOCs) are ubiquitous in the air we breathe. The use of passive samplers to measure these concentrations can be an effective technique. When exposed for long durations, a passive sampler may be a good tool for investigating chronic exposures to chemicals in the environment. A passive sampler that was designed for occupational exposures can be used as such a tool. Laboratory validation under as many conditions as possible needs to be accomplished so as to characterize the sampler with known parameters. This paper describes the methods and results of an investigation into the validity of using a passive monitor to sample VOCs for a three-week period. Two concentration levels, two relative humidities, and five VOCs were studied. Results indicate that the samplers work best under conditions of high concentration with low relative humidity and low concentration with high relative humidity. For the passive sampler, excluding chloroform, percent deviations from the predicted values varied between ?41 and +22 percent; while the values between the passive and the active samplers varied between ?27 and +24 percent. Benzene, heptane, and perchloroethylene were sampled with equal precision and accuracy.     

Net Waste Reduction Analysis Applied to Air Pollution Control Technologies

Post-combustion air pollution control technologies were evaluated to determine total waste produced by the operation of these systems. A continuum of air pollution control technology choices providing increasing levels of control is presented and the quantity of waste produced by each air pollution control option has been calculated. In addition, this analysis accounts for waste produced indirectly by the generation of energy required for operation of the control technologies. This type of analysis can be used to select optimal control levels and to demonstrate why a goal of zero air emissions may not be environmentally desirable.