Effects of dietary copper exposure on accumulation,growth, and hematological parameters in Cyprinus carpio

The influence of dietary copper (Cu) exposure on accumulation, growth, and hematological parameters was investigated in Cyprinus carpio after sub-chronic ingestion of 0, 250, 500, 750 or 1000?mg?kg^?1 for 60 days. The profile of Cu accumulation among tissues in C. carpio was dependent on the exposure period and Cu concentration. Liver of C. carpio was the predominant storage tissue and the order of Cu accumulation in tissues was liver?>?intestine?> gill?>?kidney?>?muscle. Cu concentration at >125?mg?kg^?1 reduced growth rate, and was inversely related to growth. The RNA?:?DNA ratios were not affected by exposure and there was no correlation between growth rate and RNA?:?DNA ratio in liver and muscle. There were no significant effects of exposure on blood parameters except for magnesium. Cu exposure time and dose increased the serum glutamic-oxaloacetic transaminase (SGOT) and serum glutamic-pyruvic transaminase (SGPT) activity levels.     

Cytotoxic, phytotoxic, and mutagenic appraisal to ascertain toxicological potential of particulate matter emitted from automobiles

Vehicular air pollution is a mounting health issue of the modern age, particularly in urban populations of the developing nations. Auto-rickshaws are not considered eco-friendly as to their inefficient engines producing large amount of particulate matter (PM), thus posing significant environmental threat. The present study was conducted to ascertain the cytotoxic, phytotoxic, and mutagenic potential of PM from gasoline-powered two-stroke auto-rickshaws (TSA) and compressed natural gas-powered four-stroke auto-rickshaws (FSA). Based on the increased amount of aluminum quantified during proton-induced X-ray emission analysis of PM from TSA and FSA, different concentrations of aluminum sulfate were also tested to determine its eco-toxicological potential. The MTT assay demonstrated significant (p?<?0.001) dose-dependent cytotoxic effects of different concentrations of TSA, FSA, and aluminum sulfate on BHK-21 cell line. LC₅₀ of TSA, FSA, and aluminum sulfate was quantified at 16, 11, and 23.8 μg/ml, respectively, establishing PM from FSA, a highly cytotoxic material. In case of phytotoxicity screening using Zea mays, the results demonstrated that all three tested materials were equally phytotoxic at higher concentrations producing significant reduction (p?<?0.001) in seed germination. Aluminum sulfate proved to be a highly phytotoxic agent even at its lowest concentration. Mutagenicity was assessed by fluctuation Salmonella reverse mutation assay adopting TA100 and TA98 mutant strains with (+S9) and without (?S9) metabolic activation. Despite the fact that different concentrations of PM from both sources, i.e., TSA and FSA were highly mutagenic (p?<?0.001) even at lower concentrations, the mutagenic index was higher in TSA. Data advocate that all tested materials are equally ecotoxic, and if the existing trend of atmospheric pollution by auto-rickshaws is continued, airborne heavy metals will seriously affect the normal growth of local inhabitants and increased contamination of agricultural products, which will amplify the dietary intake of the toxic elements and could result in genetic mutation or long-term health implications.     

Effect of repeated oral administration of bifenthrin antioxidant status and acetylcholinesterase activity in brain of rats

The oxidative-stress-inducing potential of the pyrethroid, bifenthrin, in the brain of rats was evaluated following daily oral administration of 5.8 mg/kg body weight. Lipid peroxidation in the brain was increased, while the activities of superoxide dismutase, catalase, glutathione peroxidase, and glutathione S-transferase decreased. The activity of acetylcholinesterase (AChE) in erythrocytes and brain also decreased. Bifenthrin induces severe oxidative stress in brain, and inhibits brain and erythrocyte AChE.     

Responses of European eel (Anguilla anguilla L.) circulating phagocytes to an in situ closed pulp mill effluent exposure and its association with organ-specific peroxidative damage

The effect of bleached kraft pulp mill effluent (BKPME) persistent compounds on phagocyte activities and its organ-specific influence in gill, kidney and liver was studied in European eel (Anguilla anguilla L.). Eels were caged and plunged at 3 different sites-50 m (site 1), 100 m (site 2) and 2,000 m (site 3) away from the end of the closed BKPME discharging channel for 8 and 48 h. Gill, head kidney and peritoneum phagocytes oxidative burst activity (OBA) was measured by the nitroblue tetrazolium reduction assay whereas lipid peroxidation (LPO) in eel gill, kidney and liver was measured by thiobarbituric acid reaction. A significant gill OBA induction was found at 8h on site 2, and on sites 1, 2 and 3 at 48 h exposure. However, in head kidney and peritoneal exudate phagocytes, OBA induction was significant only at sites 2 and 3 after 48 h exposure. In those particular sites, a significant increase in gill, kidney and liver LPO was measured that is assumed to result from OBA induction. Considering OBA and LPO, gill is the most affected tissue compared to kidney and liver. Gill vulnerability towards peroxidative damage was demonstrated at 8h on site 2 and at 48 h on sites 1, 2 and 3, whereas in kidney was observed at sites 2 and 3 only at 48 h. Liver LPO increased at site 2 only after 48 h exposure. Our results demonstrate that the OBA activation pattern in gill and kidney is associated with the induced peroxidative damage extent in those organ, together with water pollution the exposure route, resulting from previous BKPME effluent sediment contamination which may affect the activation pattern of circulating fish phagocytes.     

Determination of acaricide residues in saudi arabian honey and beeswax using solid phase extraction and gas chromatography

Determination of acaricide residues of flumethrin, tau-fluvalinate, coumaphos, and amitraz in honey and beeswax was carried out using a rapid extraction method utilizing C-18 SPE cartridges and an analytical method utilizing GC with ECD, NPD, and MSD detectors for the four acaricides. Recovery percentages from the extraction method ranged from 90-102%, while the minimum detection levels ranged from 0.01-0.05 mg/kg for the acaricides. Nine of the 21 analyzed samples were found to be contaminated with the acaricides tau-fluvalinate and coumaphos. Neither flumethrin nor amitraz was detected in any of the honey or wax samples. Coumaphos was found only in honey samples in which two samples exceeded the tolerance levels set by EPA and EC regulations. It has not been detected in beeswax. Five honey samples and eight beeswax samples were found to be contaminated with tau-fluvalinate. One of the wax samples was contaminated with a relatively high residue of tau-fluvalinate and contained above 10 mg/kg.     

Behavior of two phenyl urea herbicides in clayey soils and effect of alternating dry-wet conditions on their availability

Adsorption and mobility of linuron (3-(3,4-dichlorophenyl)-1-methoxy-1-methylurea) and diuron (3-(3,4-dichlorophenyl)-1, 1-dimethylurea) were studied in clayey soils from the Gharb area (Morocco). Soils A and B were planted with sun flower (Helianthus annuus) while soil C was planted with sugar cane (Saccharum offcinarum). Adsorption was studied for linuron in soils A and B, while mobility was studied only in soil B. Adsorption data were found to fit the Freundlich equation with correlation coefficients r2 > 0.9. Freundlich coefficients (Kf, nf) were in agreement with L and S isotherm types for soils A and B, respectively. Values of Koc (195 and 102) indicate moderate adsorption. Desorption isotherms for linuron showed hysteresis for both soils. The pesticide would be more bound to soil A (H = 8.44) than to soil B (H = 4.01). The effect of alternating wet and dry conditions was tested for soils A and B. Results showed that retention would increase in soil subject to an additional wet and dry cycle. In the case of diuron isotherm was of type L in soil C. Desorption was noticeable at high concentrations and tended to decrease when concentrations diminished. Mobility of linuron was tested in polyvinyle chloride (PVC) columns, which received different treatments before their percolation. The pesticide was more mobile in a previously saturated column. In columns subject to a drying step after saturation with water, linuron mobility was greatly reduced.     

The development of low cost adsorbents from clay and waste materials: a review

Increased energy consumption due to industrial growth has increased the levels of carbon dioxide (CO₂) emission being released into the atmosphere. CO₂ emission is a type of greenhouse gas which is a major cause of global warming. Since the issue of CO₂ emissions has drawn much attention in recent years, the development of CO₂ capture technology has become a necessity. Although CO₂ adsorbents are still at the early development stage, it has been suggested that CO₂ adsorbents are the most effective technology in controlling CO₂ emissions. Solid adsorbents have great potential as an alternative method to conventional adsorbents in adsorbing CO₂. In this paper, low cost adsorbents including activated carbon, zeolites, mesoporous silica and clays are discussed in terms of adsorbent preparation methods and CO₂ adsorption capacity. The low cost adsorbents are mainly derived from waste materials such as fly ash, steel slag, red mud, bagasses wastes and wood wastes. Besides that, natural resources such as clays have also been applied as low cost CO₂ adsorbents. Surface modifications have also been applied to the low cost adsorbents, including metal ion exchange and amine impregnation to enhance CO₂ adsorption capacity. In the last section, the current status of CO₂ adsorbents is summarized and future trends are discussed briefly to predict the potential materials which can be applied as CO₂ adsorbents.     

Validation of two air quality models for Indian mining conditions

All major mining activity particularly opencast mining contributes to the problem of suspended particulate matter (SPM)directly or indirectly. Therefore, assessment and prediction are required to prevent and minimize the deterioration of SPM due tovarious opencast mining operations. Determination of emission rate of SPM for these activities and validation of air quality models are the first and foremost concern. In view of the above, the study was taken up for determination of emission rate for SPMto calculate emission rate of various opencast mining activitiesand validation of commonly used two air quality models for Indianmining conditions. To achieve the objectives, eight coal and three iron ore mining sites were selected to generate site specific emission data by considering type of mining, method of working, geographical location, accessibility and above all resource availability. The study covers various mining activitiesand locations including drilling, overburden loading and unloading, coal/mineral loading and unloading, coal handling orscreening plant, exposed overburden dump, stock yard, workshop, exposed pit surface, transport road and haul road. Validation of the study was carried out through Fugitive Dust Model (FDM) and Point, Area and Line sources model (PAL2) by assigning the measured emission rate for each mining activity, meteorologicaldata and other details of the respective mine as an input to the models. Both the models were run separately for the same set ofinput data for each mine to get the predicted SPM concentrationat three receptor locations for each mine. The receptor locationswere selected such a way that at the same places the actual filedmeasurement were carried out for SPM concentration. Statisticalanalysis was carried out to assess the performance of the modelsbased on a set measured and predicted SPM concentration data. The value of coefficient of correlation for PAL2 and FDM was calculated to be 0.990-0.994 and 0.966-0.997, respectively, which shows a fairly good agreement between measured and predicted values of SPM concentration. The average index of agreement values for PAL2 and FDM was found to be 0.665 and0.752, respectively, which represents that the prediction by PAL2 and FDM models are accurate by 66.5 and 75.2%, respectively. These indicate that FDM model is more suited for Indian mining conditions.     

Heterogeneous Traffic Induced Effects on Vertical Dispersion Parameter in the Near Field of Roadways - a Wind Tunnel Study

The varying traffic parameters such as traffic volume, speed, shape and size, and terrain roughness conditions play a vital role on dispersion of pollutants in the near field of roadways. Simulation experiments were carried out in the Environmental Wind Tunnel (EWT) to evaluate the traffic induced effects on vertical dispersion parameter (σ _z ) for heterogeneous traffic conditions in the near field of roadways for evaluating the effect of variations in traffic volume, terrain roughness condition and approaching wind direction. The model vehicle movement system was fabricated and made operational in the EWT, which allowed the variation in traffic volume, speed and wind road inclination. Sixty-six hydrocarbon tracer experiments were performed to evaluate σ _z in the near field of roadways for variable traffic volume, three terrain roughness conditions and two approaching wind directions (i.e., 90° and 60°). The values of σ _z for heterogeneous traffic conditions were found to be higher for low roughness conditions in comparison to other two higher roughness conditions for various traffic volumes and approaching wind directions. This revised version was published online in July 2006 with corrections to the Cover Date.     

Measuring sorption of hydrophilic organic compounds in soils by an unsaturated transient flow method

Determination of sorption of hydrophilic, weakly sorbing organic compounds in soil by conventional batch methods using a slurried suspension is often prone to considerable errors because small changes in the solution concentration on equilibration must be accurately determined. This difficulty is exacerbated for compounds susceptible to degradation, which also decreases the solution concentration. The objective of this study was to determine sorption of hydrophilic pesticides by applying an unsaturated transient flow method, which enables determination of sorption at sufficiently small solution to soil ratios. The method makes use of piston-like displacement of the antecedent solution in equilibrium with sorbed phase when pesticide-free water is infiltrated into a soil column spiked with a pesticide. Pesticide sorption and the solution concentration are inferred from a plot of total pesticide content per unit mass of soil vs. water content in a region where the antecedent solution is accumulated. Thus, extraction of solution from relative dry soil is unnecessary. We tested this method for two hydrophilic pesticides, monocrotophos [dimethyl (E)-1-methyl-2-(methyl-carbamoyl) vinyl phosphate] and dichlorvos (2,2-dichlorovinyl dimethyl phosphate). The sorption coefficient, K(d), obtained for monocrotophos was slightly lower than that by batch method (K(d) = 0.10 vs. 0.19 L kg(-1)), whereas for dichlorvos, a compound highly susceptible to degradation, the unsaturated flow method yielded a much smaller K(d) (0.19 vs. 3.22 L kg(-1)). The K(d) values for both compounds were consistent with the observed retardation in the pesticide displacement in the columns. The proposed method is more representative of field conditions and particularly suitable for weakly sorbing organic compounds in soils.