A simplified steady-state model for air,water and steam curtains

Curtain mitigation systems are modeled here since they have experimentally shown their efficiency in reducing the concentration of certain toxic gases within dense gas clouds. Air, water and steam are analyzed in a model as the physical barriers to decrease the gas concentration. The model, developed for a steady-state mitigation process, is based on the mass, energy and momentum conservation laws. Concentration estimations during the dispersion before and after the mitigation are performed with a SLAB type model. A sensitivity analysis for each model is given to detect which variables have bigger effects. A release of chlorine is used as an example and the results are calculated in a prototype developed in Visual C++, where the model is solved using the Runge–Kutta 4th order method. The results include the effects of composition, speed, temperature and height of the releasing point as well as a comparison with CFD simulations. The proposed model is simplified and it cannot reproduce eddy effects but it is fast and robust enough. The model provides a set of equations that can be used in numerical problems where explicit derivatives are required, e.g. optimizations procedures.     

Methylmercury, fish consumption, and the precautionary principle

This paper considers several broad issues in the context of probabilistic assessment of the benefits of curtailing mercury (Hg) emissions from U.S. coal-fired power plants, based on information developed from recent literature and epidemiology studies of health effects of methylmercury. Exposure of the U.S. population is considered on the national scale, in large part because of recent questions arising from survey and experimental data about the relative importance of local deposition of airborne Hg. Although epidemiological studies have provided useful information, safe levels of Hg exposure remain uncertain, in part because of other dietary considerations in the populations that were studied. For example, much of the seafood consumed in one of the major studies was also contaminated with polychlorinated biphenyls, as are fish taken from some U.S. fresh waters. The primary epidemiological approach involves cross-study comparisons in relation to mean exposures, rather than detailed critiques of individual effects reported in each study. U.S. exposures are seen to be well below the levels at which adverse health effects are reported. This analysis supports the conclusion that unilateral reduction of Hg emissions from U.S. coal-fired power plants alone is unlikely to realize significant public health benefits.     

Uncertainty aspects in process safety analysis

Uncertainties of input data as well as of simulation models used in process safety analysis (PSA) are key issues in the application of risk analysis results. Mostly, it is connected with an incomplete and uncertain identification of representative accident scenario (RAS) and other vague and ambiguous information required for the assessment of particular elements of risk, especially for determination of frequency as well as severity of the consequences of RAS. The authors discuss and present the sources and types of uncertainties encountered in PSA and also methods to deal with them. There are different approaches to improve such analysis including sensitivity analysis, expert method, statistics and fuzzy logic. Statistical approach uses probability distribution of the input data and fuzzy logic approach uses fuzzy sets. This paper undertakes the fuzzy approach and presents a proposal for fuzzy risk assessment. It consists of a combination of traditional part, where methods within the process hazard analysis (PHA) are used, and “fuzzy part”, applied quantitatively, where fuzzy logic system (FLS) is involved. It concerns frequency, severity of the consequences of RAS and risk evaluation. In addition, a new element called risk correction index (RCI) is introduced to take into account uncertainty concerned with the identification of RAS. The preliminary tests confirmed that the final results on risk index are more precisely and realistically determined.     

Cancer and Non-Cancer Health Risk from Eating Cassava Grown in Some Mining Communities in Ghana

Food crops such as cassava, cocoyam and other tuber crops grown in mining communities uptake toxic or hazardous chemicals such as arsenic, and cadmium, from the soil. Cassava is a stable food for Ghanaians. This study evaluated human health risk from eating cassava grown in some mining communities in Ghana such as Bogoso, Prestea, Tarkwa and Tamso, which are important mining towns in the Western Region of Ghana. The study evaluated cancer and non-cancer health effects from eating cassava grown in the study areas in accordance with US Environmental Protection Agency’s Risk Assessment guidelines. The results of the study revealed the following: cancer health risk for Tamso, 0.098 (RME – Reasonable Maximum Exposure) and 0.082 (CTE – Central Tendency Exposure). This means that approximately 10 and 8 out of 100 resident adults are likely to suffer from cancer related cases by RME and CTE parameters respectively. For Prestea, we have 0.010 and 0.12, which also means that approximately 1 out of 100 and 10 resident adults out of 100 are also likely to suffer from cancer related diseases by RME and CTE parameters. The results of the study obtained were found to be above the acceptable cancer risk range of 1× 10⁻⁶ to 1× 10⁻⁴, i.e., 1 case of cancer out of 1 million or 100,000 people respectively.     

Exploring the risks and benefits of flexibility in biodiversity offset location in a case study of migratory shorebirds

Biodiversity offsets aim to counterbalance the residual impacts of development on species and ecosystems. Guidance documents explicitly recommend that biodiversity offset actions be located close to the location of impact because of higher potential for similar ecological conditions, but allowing greater spatial flexibility has been proposed. We examined the circumstances under which offsets distant from the impact location could be more likely to achieve no net loss or provide better ecological outcomes than offsets close to the impact area. We applied a graphical model for migratory shorebirds in the East Asian–Australasian Flyway as a case study to explore the problems that arise when incorporating spatial flexibility into offset planning. Spatially flexible offsets may alleviate impacts more effectively than local offsets; however, the risks involved can be substantial. For our case study, there were inadequate data to make robust conclusions about the effectiveness and equivalence of distant habitat-based offsets for migratory shorebirds. Decisions around offset placement should be driven by the potential to achieve equivalent ecological outcomes; however, when considering more distant offsets, there is a need to evaluate the likely increased risks alongside the potential benefits. Although spatially flexible offsets have the potential to provide more cost-effective biodiversity outcomes and more cobenefits, our case study showed the difficulty of demonstrating these benefits in practice and the potential risks that need to be considered to ensure effective offset placement.     

Melt Strength and Rheological Properties of Biodegradable Poly(Lactic Aacid) Modified via Alkyl Radical-Based Reactive Extrusion Processes

Poly(lactic acid) (PLA) has been modified using twin-screw reactive extrusion to improve its melt properties and crystallinity. In this work lauroyl peroxide was used as an alkyl free radical source, abstracting hydrogen atoms from the PLA backbone leading to branching and chain extension reactions. Once the linear viscoelastic region was determined for these polymers, changes in dynamic rheology (dynamic viscosity real and loss modulus) were measured. Gel permeation chromatography showed that the molecular weight and polydispersity increased to a maximum with the addition of 1.00 and 0.50?wt% peroxide, respectively. Low temperature ?? transitions in dynamical mechanical thermal traces gave further evidence that branching had also occurred. G?ttfert Rheotens measurements showed a three fold increase in melt strength due to both increased chain length and branching. Thermal analysis showed the level of crystallisation had decreased also possibly due to branching. Reductions in crystallinity and improved melt strength are known to be critical for film and foam formation.     

Key parametric analysis on designing an effective forced mitigation system for LNG spill emergency

Concerns over public safety and security of a potential liquefied natural gas (LNG) spill have promoted the need for continued improvement of safety measures for LNG facilities. The mitigation techniques have been recognized as one of the areas that require further investigation to determine the public safety impact of an LNG spill. Forced mitigation of LNG vapors using a water curtain system has been proven to be effective in reducing the vapor concentration by enhancing the dispersion. Currently, no engineering criteria for designing an effective water curtain system are available, mainly due to a lack of understanding of the complex droplet–vapor interaction. This work applies computational fluid dynamics (CFD) modeling to evaluate various key design parameters involved in the LNG forced mitigation using an upwards-oriented full-cone water spray. An LNG forced dispersion model based on a Eulerian–Lagrangian approach was applied to solve the physical interactions of the droplet–vapor system by taking into account the various effects of the droplets (discrete phase) on the air–vapor mixture (continuous phase). The effects of different droplet sizes, droplet temperatures, air entrainment rates, and installation configurations of water spray applications on LNG vapor behavior are investigated. Finally, the potential of applying CFD modeling in providing guidance for setting up the design criteria for an effective forced mitigation system as an integrated safety element for LNG facilities is discussed.     

Hovering guards of the stingless bee <Emphasis Type="Italic">Tetragonisca angustula</Emphasis> increase colony defensive perimeter as shown by intra- and inter-specific comparisons

Social insects need to defend their nest against robbery, parasitism and predation. The stingless bee Tetragonisca angustula is unique in that it has guards that hover near the nest entrance in addition to guards that stand at the entrance. We tested both the general hypothesis that hovering guards increase the effectiveness with which flying intruders are detected and the specific hypothesis that hovering guards improve the detection of workers of the obligate robber bee, Lestrimellita limao. In an intraspecific study comparing colonies, we found a strong positive relationship between the number of hovering guards and the distance at which a dummy robber bee or L. limao worker, experimentally moved towards the nest entrance, was detected. These results were mirrored in an interspecific study showing that four species of stingless bees with similar population colonies but which lacked hovering guards, detected L. limao only at the nest entrance, in contrast to T. angustula. In addition, we found that a greater number of attacks by guards occurred when dummies were impregnated with citral, a major component of L. limao mandibular gland odour. Our results support the hypothesis that T. angustula hovering guards increase the detection perimeter for flying intruders, especially L. limao.     

How safe are the global water coverage figures? Case study from Madhya Pradesh, India

The World Health Organization (WHO)/United Nations Children??s Fund (UNICEF) Joint Monitoring Programme (JMP) for Water Supply and Sanitation was designed to provide reference figures for access in individual countries to safe water. The JMP is based on non-administrative or nongovernment data from national-level surveys such as the Multiple Indicator Clusters Survey (MICS) or Demographic Health Survey. In the 2007 JMP report, India is noted to have water supply coverage of 89% (95% in urban areas and 85% in rural areas) compared to the Government of India estimates of 95%. The central state of Madhya Pradesh is noted by the Government of India to have coverage of 60%. However, the definition of access to safe water currently does not consider the quality or safety of the water being consumed. This paper, therefore, presents results from the application of a statistical tool (random multiple cluster technique??termed Rapid Assessment of Drinking Water Quality [RADWQ]) to Indore Zone in Madhya Pradesh. When results provided by the RADWQ technique are compared to the JMP MICS data, coverage levels reported in the JMP are reduced by up to 40% due to the high risk of microbiological (thermotolerant coliforms) contamination. In Indore Zone, the coverage of safe water reduced from 42% to 25% through the inclusion of the water safety parameters. The study recommends the inclusion of water quality/safety data in reported data under the UNICEF/WHO JMP.     

Safe speed limits for a safe system: The relationship between speed limit and fatal crash rate for different crash types

Objective: The objective of this article is to provide empirical evidence for safe speed limits that will meet the objectives of the Safe System by examining the relationship between speed limit and injury severity for different crash types, using police-reported crash data.

Method: Police-reported crashes from 2 Australian jurisdictions were used to calculate a fatal crash rate by speed limit and crash type. Example safe speed limits were defined using threshold risk levels.

Results: A positive exponential relationship between speed limit and fatality rate was found. For an example fatality rate threshold of 1 in 100 crashes it was found that safe speed limits are 40 km/h for pedestrian crashes; 50 km/h for head-on crashes; 60 km/h for hit fixed object crashes; 80 km/h for right angle, right turn, and left road/rollover crashes; and 110 km/h or more for rear-end crashes.

Conclusions: The positive exponential relationship between speed limit and fatal crash rate is consistent with prior research into speed and crash risk. The results indicate that speed zones of 100 km/h or more only meet the objectives of the Safe System, with regard to fatal crashes, where all crash types except rear-end crashes are exceedingly rare, such as on a high standard restricted access highway with a safe roadside design.