Monitoring of ambient air PCDD/F levels in Portugal

As part of a monitoring program conducted by IDAD--Institute for Environment and Development and supported by regional municipal solid waste (MSW) management authorities, dioxin concentrations in ambient air were measured in three regions of Portugal: Porto, Lisbon and Madeira. These independent studies were performed with the intention of providing data as a basis for the evaluation of potential impacts of the operation of recently built MSW incinerators. Thus, 170 samples were collected in nine different sites from January 1999 till present. The measured levels revealed an extremely variable content of PCDDs/PCDFs depending both on the area and the season of the year. Samples taken in Porto and Lisbon reveal a similar homologue structure even if concentrations measured in the Porto region are significantly greater. Data from Madeira is characteristic of a remote site with some of the congeners concentrations below the detection limit.     

Comparison of active and passive sampling for the determination of persistent organic pollutants (POPs) in sewage treatment plants

Semipermeable membrane devices (SPMDs) and conventional active sampling methods were used for the sampling of wastewater from the wastewater treatment plant of Thessaloniki, northern Greece. The occurrence of 22 POPs was shown by both sampling methods. The most abundant compounds were heptachlor-exo-epoxide and PCBs-52; -101 and -180. Concentrations of POPs detected by active sampling and those estimated by the SPMDs matched very well in some cases, but significant mismatches were also observed. Regression analysis of the results detected by both methods showed moderate correlations. The highest uptake rate of hydrophobic compounds by SPMDs was observed for analytes with log K(OW) between 5.5 and 6.0. Our data suggest that active and passive sampling are complimentary, and that at least for the outflow of a WWTP, SPMDs could be used for the routine monitoring of compounds that are listed at the Water Framework Directive of the European Commissions.     

Fluorescence and DOC contents of estuarine pore waters from colonized and non-colonized sediments: effects of sampling preservation

The influence of the colonization of salt marsh sediments with Halimione portulacoides was evaluated by analysing the fluorescent dissolved organic matter (FDOM) in sediment pore waters from a salt marsh at different depths. Cores of sediments at colonized and non-colonized sites were collected from a coastal lagoon (Ria de Aveiro, Portugal). The DOC content of extracted pore waters was determined and characterized by synchronous molecular fluorescence (Deltalambda=60nm) and UV-visible spectroscopies. The common practice of freezing sediment cores for further and later chemical investigation was shown not to be an appropriate methodology of sample preservation. On the contrary, freezing of extracted and filtered pore water seemed not to affect either the DOC content or the fluorescence properties of pore waters. Two types of fluorescent substances were found in the pore waters spectra; one corresponding to humic-like substances and another one resembling proteins. However, major differences were found in the spectra of pore waters depending on both depth and the presence/absence of vegetation colonization.     

Application of cupuassu shell as biosorbent for the removal of textile dyes from aqueous solution

The cupuassu shell (Theobroma grandiflorum) which is a food residue was used in its natural form as biosorbent for the removal of C.I. Reactive Red 194 and C.I. Direct Blue 53 dyes from aqueous solutions. This biosorbent was characterized by infrared spectroscopy, scanning electron microscopy, and nitrogen adsorption/desorption curves. The effects of pH, biosorbent dosage and shaking time on biosorption capacities were studied. In acidic pH region (pH 2.0) the biosorption of the dyes were favorable. The contact time required to obtain the equilibrium was 8 and 18 h at 298 K, for Reactive Red 194 and Direct Blue 53, respectively. The Avrami fractionary-order kinetic model provided the best fit to experimental data compared with pseudo-first-order, pseudo-second-order and chemisorption kinetic adsorption models. The equilibrium data were fitted to Langmuir, Freundlich, Sips and Radke-Prausnitz isotherm models. For both dyes the equilibrium data were best fitted to the Sips isotherm model.     

Use of three bivalve species for biomonitoring a polluted estuarine environment

Estuaries are marine areas at great contamination risk due to their hydrodynamic features. PAH are wide and ubiquitous contaminants with a high presence in these marine environments. Chemical analysis of sediments can provide information, although it does not give a direct measure of the toxicological effect of such contaminants in the biota. Samples of Venerupis pullastra, Cerastoderma edule, and Mytilus galloprovincialis were collected from two locations in Corcubión estuary (Norhwest of Spain). The level of PAH in sediment and biota, and its possible origin were assessed. A moderate level of contamination was observed with a predominance of PAH of a pyrogenic origin. Genotoxic damage, measured as single-strand DNA breaks with the comet assay, was evaluated in gill tissue and in hemolymph. The values of DNA damage obtained showed a higher sensitivity of clams and cockles to the pollution load level. These differences among species make us suggest the use of some other species coupled with mussels as an optimal tool for biomonitoring estuarine environments.     

Forecasting of cyanobacterial density in Torrão reservoir using artificial neural networks

The ability of general regression neural networks (GRNN) to forecast the density of cyanobacteria in the Torr?o reservoir (Tamega river, Portugal), in a period of 15 days, based on three years of collected physical and chemical data, was assessed. Several models were developed and 176 were selected based on their correlation values for the verification series. A time lag of 11 was used, equivalent to one sample (periods of 15 days in the summer and 30 days in the winter). Several combinations of the series were used. Input and output data collected from three depths of the reservoir were applied (surface, euphotic zone limit and bottom). The model that presented a higher average correlation value presented the correlations 0.991; 0.843; 0.978 for training, verification and test series. This model had the three series independent in time: first test series, then verification series and, finally, training series. Only six input variables were considered significant to the performance of this model: ammonia, phosphates, dissolved oxygen, water temperature, pH and water evaporation, physical and chemical parameters referring to the three depths of the reservoir. These variables are common to the next four best models produced and, although these included other input variables, their performance was not better than the selected best model.     

Investigation of Human and Animal Viruses in Water Matrices from a Rural Area in Southeastern Region of Brazil and Their Potential Use as Microbial Source-Tracking Markers

Food and Environmental Virology - This study assessed the sources of contamination of water matrices in a rural area using detection of a host-specific virus (human adenovirus [HAdV], porcine...